{原创}硬盘检测心得
最近公司内务整顿，俺的任务测试硬盘：# format
Searching for disks...done
c0t8d0: configured with capacity of 68.35GB
AVAILABLE DISK SELECTIONS:
0. c0t0d0
/pci@1d,700000/scsi@4/sd@0,0
1. c0t1d0
/pci@1d,700000/scsi@4/sd@1,0
2. c0t2d0
/pci@1d,700000/scsi@4/sd@2,0
3. c0t3d0
/pci@1d,700000/scsi@4/sd@3,0
4. c0t8d0
/pci@1d,700000/scsi@4/sd@8,0
5. c0t9d0
/pci@1d,700000/scsi@4/sd@9,0
6. c0t10d0
/pci@1d,700000/scsi@4/sd@a,0
7. c0t11d0
/pci@1d,700000/scsi@4/sd@b,0
Specify disk (enter its number): 1
selecting c0t1d0
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition- select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
! - execute , then return
quit
format> analyze
ANALYZE MENU:
read - read only test (doesn't harm SunOS)
refresh- read then write(doesn't harm data)
test - pattern testing(doesn't harm data)
write - write then read (corrupts data)
compare- write, read, compare (corrupts data)
purge - write, read, write (corrupts data)
verify - write entire disk, then verify (corrupts data)
print - display data buffer
setup - set analysis parameters
config - show analysis parameters
! - execute, then return
quit
analyze> compare
Ready to analyze (will corrupt data). This takes a long time,
but is interruptable with CTRL-C. Continue? yes
pass 0 - pattern = 0xc6dec6de
2/10/66
Total of 0 defective blocks repaired.
analyze>
1、硬盘在检测完后如果提示：Total of 0 defective blocks repaired
ok 硬盘是好盘
2、format硬盘提示drive not available 报废
3、format硬盘提示type unknow可以尝试更换硬盘控制板 说不定硬盘重获新生
本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u1/42931/showart_337330.html
页:
[1]