新手求助，新装系统不能自动启动系统
昨天新装的solaris10，昨天关了，今天开机还是没有自动启动到系统下。请大家帮忙！谢谢了！我抓了点信息：
disk1 /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@1,0
disk0 /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@0,0
disk /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@0,0
{3} ok printenv
Variable Name Value Default Value
test-args
diag-passes 1 1
local-mac-address? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device ttya ttya
input-device ttya ttya
auto-boot-on-error? true true
load-base 16384 16384
auto-boot? true true
network-boot-arguments
boot-command boot boot
diag-file
diag-device net net
boot-file
boot-device disk disk net
use-nvramrc? true false
nvramrc devalias net /pci@9,7000 ...
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity normal normal
fcode-debug? false false
diag-out-console false false
diag-trigger error-reset power-on-res ... error-reset power-on-res ...
service-mode? false false
diag-script normal normal
diag-level min max
diag-switch? false false
error-reset-recovery sync sync
{3} ok setevn boot-device disk
setevn ?
{3} ok setenv boot-device disk
boot-device = disk
{3} ok
{3} ok
{3} ok
{3} ok boot
Resetting ...
<*>
Firmware I/O Diagnostics Reset
@(#)OBP 4.18.11 2006/05/03 07:41 Sun Fire 4XX
Front Panel Keyswitch is in Diagnostic position.
System is initializing in Service Mode.
Online:CMP1 UltraSPARC IV+ (v2.2) 10:1 1500MHz 32MB 5:1 ECache
Online: *CMP3 UltraSPARC IV+ (v2.2) 10:1 1500MHz 32MB 5:1 ECache
Enabling system bus....... CMP1 CMP3 Done
Initializing CPUs.........
Init ICache/etc........... CMP1 CMP3 Done
Init ECache Tags.......... CMP1 CMP3 Done
Clearing TLBs............. CMP1 CMP3 Done
Setup I/DTLBs............. CMP1 CMP3 Done
Enabling Cache/MMUs....... CMP1 CMP3 Done
Init ECache Data.......... CMP1 CMP3 Done
Initializing boot memory..
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 128KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.f74c.2540;ROM CRC = 0000.0000.f74c.2540
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.ec70 (508KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0 Done
BootCPU3 starting Forth at 0000.0000.f000.00e0
Diagnostic console initialized
Configure root name: SUNW,Sun-Fire-V490
SUNW,Sun-Fire-V490 Probing system devices
/: gptwo at 0,0 Nothing there
(1500 MHz @ 10:1, 16 MB) /: gptwo at 1,0 cmp cpu cpu memory-controller
/: gptwo at 2,0 Nothing there
(1500 MHz @ 10:1, 16 MB) /: gptwo at 3,0 cmp cpu cpu memory-controller
/: gptwo at 4,0 Nothing there
/: gptwo at 5,0 Nothing there
/: gptwo at 6,0 Nothing there
/: gptwo at 7,0 Nothing there
/: gptwo at 8,0 pci pci
/: gptwo at 9,0 pci pci
Loading Support Packages: obp-tftp kbd-translator SUNW,i2c-ram-device SUNW,fru-device
Loading onboard drivers: ebus
/pci@9,700000/ebus@1: flashprom bbc power i2c i2c rtc gpio pmc rsc-control rsc-console serial
/pci@9,700000/ebus@1/i2c@1,2e: fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru nvram idprom fru fru
/pci@9,700000/ebus@1/i2c@1,30: temperature ioexp ioexp ioexp temperature ioexp ioexp ioexp ioexp temperature-sensor fru fru fru
fru fru rscrtc
Memory Configuration:
/memory: CMP1 Bank0256 +256 +256 +256 : 1 GB @b0000000008-way #0
/memory: CMP1 Bank1256 +256 +256 +256 : 1 GB @b0000000008-way #2
/memory: CMP1 Bank2256 +256 +256 +256 : 1 GB @b0000000008-way #4
/memory: CMP1 Bank3256 +256 +256 +256 : 1 GB @b0000000008-way #6
/memory: CMP3 Bank0256 +256 +256 +256 : 1 GB @b0000000008-way #1
/memory: CMP3 Bank1256 +256 +256 +256 : 1 GB @b0000000008-way #3
/memory: CMP3 Bank2256 +256 +256 +256 : 1 GB @b0000000008-way #5
/memory: CMP3 Bank3256 +256 +256 +256 : 1 GB @b0000000008-way #7
Probing I/O buses
/pci@8,600000: Device 1 Nothing there
/pci@8,600000: Device 2 Nothing there
/pci@8,700000: Device 2 Nothing there
/pci@8,700000: Device 3 Nothing there
/pci@8,700000: Device 4 Nothing there
/pci@8,700000: Device 5 Nothing there
/pci@8,700000: Device 6 ide disk cdrom
/pci@9,600000: Device 1 network
/pci@9,600000: Device 2 SUNW,qlc fp disk
/pci@9,700000: Device 1 usb
/pci@9,700000: Device 2 network
Sun Fire V490, No Keyboard
Copyright 2005 Sun Microsystems, Inc.All rights reserved.
OpenBoot 4.18.11, 8192 MB memory installed, Serial #71388778.
Ethernet address 0:14:4f:41:4e:6a, Host ID: 84414e6a.
Creating CMP memory layout properties.
System is operating in Service Mode.
Reading temperature limits from FRUPROMs: CMP1/3 BACKPLANE
Environmental monitor is ON
Rebooting with command: boot
Boot device: netFile and args:
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
Evaluating:
Can't open boot device
boot disk
必须boot disk才可以引导到系统。我改怎么设置呢？ 你在OK下设置系统安装盘的别名为disk,如果不这样设置,认不出disk是哪块磁盘的.要么你指定的磁盘不对
[ 本帖最后由 yoyosys 于 2008-6-19 11:16 编辑 ] 不太看得明白楼上的 你是从net起来的 ：Boot device: netFile and args:
在ok模式 setenvdiag-device disk
你主机的钥匙在诊断模式，Front Panel Keyswitch is in Diagnostic position.把钥匙拧到正常的位置。
回复 #3 撒旦的使者 的帖子
简单的说就是不能够自动启动到系统回复 #4 ibmlenovo 的帖子
谢谢！下午去试试 必须boot disk才可以引导到系统。我改怎么设置呢？这样的话，你ok下设置setenv boot-device disk
setenv auto-boot? true
[ 本帖最后由 Jion 于 2008-6-19 12:24 编辑 ]
回复 #4 ibmlenovo 的帖子
:wink:[ 本帖最后由 Jion 于 2008-6-19 12:29 编辑 ]
回复 #4 ibmlenovo 的帖子
谢谢你！也谢谢各位。把钥匙转到正常的位置就OK了。 用fsck进行检查试试吧，因为可能由于不正常关机文件系统里的数据与你硬盘里的数据不同步造成的，那次做试验出现这种错误了，你执行fsck看一下可不可以
页:
[1]
2