在EMC AX4-5i配置ISCSI遇到问题
我新买的一台DELL EMCAX4-5i存储，想配置存储的iscsi的端口信息，但是我的navisphere manager的管理界面上没有任何关于iscsi的菜单功能项，只有和存储管理相关的，如raid，lun，host，physical等，就是在右键的功能中找不到任何和iscsi有关的选项，navisphere manager是6.26.20.1.9，是还需要在存储上面安装什么软件吗？两个控制器都是iscsi的。[ 本帖最后由 wufeiwf 于 2009-1-7 14:43 编辑 ] 查了半天的官方文档发现写配置iscsi步骤很简单：
Configuring iSCSI ports on the storage system
Before the host can perform I/O to the iSCSI storage system, you must configure the network parameters for the storage system and host iSCSI ports.
1
In the Storage tree, right-click the icon for an iSCSI storage system and click iSCSI > Port Management.
The Port Management dialog box list all the iSCSI ports on the storage system, and when available, lists the port's IP address and the name of the initiator connected to this port
2
Select the port whose network parameters you want to enter or modify, and click Properties.
3
In the iSCSI Port Properties dialog box, for the selected port, enter the IP address, Gateway, andSubnet Mask..
Important
Consult with your Network Manager to determine the correct settings before changing MTU settings. Changing the port properties may disrupt iSCSI traffic to all ports on this SP or result in intermittent operation. Use the Connectivity Status dialog to identify and check the status of all connections to ports on this SP. Initiator configuration changes may be necessary to regain connections.
Do not enable the Require Initiator Authentication check box until you have set the network parameters for the server initiator iSCSI ports.
4
Click Apply to save the settings and return to the Port Management dialog box.
5
Repeat the process to set the network parameters for any other iSCSI SP ports.
但是我在manager中把所有的右键菜单找了一个遍也没有发现有iscsi的菜单项:em11: 有在另外一个帮助中查到：
Configuring iSCSI credentials on the initiator storage system
Assign credentials to the iSCSI initiator storage system if you will be configuring connections sets that use the shared credentials option.With the Shared option, the initiator storage system credentials are automatically assigned to the connection set.
NoteIn order for the target storage system to be able to authenticate the storage system initiators in the connection set , you must enable Require initiator authentication for the participating ports on the target storage system.
1
Select Use shared credentials to make the Shared Credentials options visible.
2
In Shared credentials, enter the required information for User Name, Secret, and Secret Type.
Click Help in the dialog box for detailed information for each option.
3
Click OK to assign the credentials to the storage system.
因为存储的初始化是来安装的工程师弄的，当时我没有看，难道是在初始化的时候需要文档中说到的证书？ 哪位老大配置过，给哥们点提示，谢谢了。 官方的资料和软件都看了半天了，没有看出头绪来，在线等... AX4-5不是使用navisphere express么？怎么是navisphere manager呢，我记得CX3/4才用manager吧
左边有iSCSI的菜单啊
[ 本帖最后由 deadwind 于 2009-1-7 22:44 编辑 ] 就那么几个菜单，点开看一下就知道了 检测你在3楼说的initiator安装配置吧, 搞不好是DELL ISP美给你配置好咯,,,,, 原帖由 deadwind 于 2009-1-7 22:39 发表 http://bbs.chinaunix.net/images/common/back.gif
AX4-5不是使用navisphere express么？怎么是navisphere manager呢，我记得CX3/4才用manager吧
左边有iSCSI的菜单啊
高版本的都采用manager了，和cx系列的浏览器管理界面一样，我这里安装的时候就是manager的界面，版本是6.26.20.现在我是怀疑初始化的时候有区别，但是有谁遇到过吗？ 原帖由 redwaves 于 2009-1-8 13:37 发表 http://bbs.chinaunix.net/images/common/back.gif
就那么几个菜单，点开看一下就知道了
老大，你这话说的，那么点英文我还是能看懂，而且我眼神还凑合，:em06: