关于DHCP的几个不是问题的问题
1、tail -f /var/log/messagesMay 12 11:12:41 fsd dhcpd: if Myser.xxx.com IN A rrset doesn't exist add my.xxx.com 300 IN A 192.168.0.217: timed out.
不知道以上信息什么意思？
2、tail -f /var/db/dhcpd/dhcpd.leases
lease 192.168.0.235 {
starts 2 2009/05/12 11:39:06;
ends 2 2009/05/12 11:49:06;
binding state active;
next binding state free;
hardware ethernet 00:02:55:d6:ba:6d;
uid "\001RAS \000\002U\326\272\215\000\000\007\000\000\000";
client-hostname "Myser";
}
lease 192.168.0.240 {
starts 2 2009/05/12 11:39:34;
ends 2 2009/05/12 11:49:34;
binding state active;
next binding state free;
hardware ethernet 00:02:55:d6:ba:6d;
uid "\001RAS \000\002U\326\272\215\000\000\000\000\000\000";
client-hostname "Myser";
}
lease 192.168.0.220 {
starts 2 2009/05/12 11:39:34;
ends 2 2009/05/12 11:49:34;
binding state active;
next binding state free;
hardware ethernet 00:02:55:d6:ba:6d;
uid "\001RAS \000\002U\326\272\215\000\000\011\000\000\000";
client-hostname "Myser";
以上 client-hostname "Myser" 对应的主机是设置了固定IP的机器。难道DHCP也要给固定IP机器预留一个动态IP？为什么还会不断的变化IP？
3、今天修改了dhcpd.conf的以下两个租期参数，重启dhcpd后不断有同事打电话说分不到IP地址，怎么会呢？
default-lease-time 10800; （3小时）
max-lease-time 28800;（8小时）
[ 本帖最后由 dylibin 于 2009-5-13 10:33 编辑 ] 第一个是DDNS的，可以忽略他。
第二个问题，你帖配置吧。
第三个你明天再观察一下
先逐个解决。 这么说第二个问题的确是个问题。配置怎么可能会有问题？我是利用一台dhcpServer通过dhcp中继为多Vlan提供IP的，其中192.168.0.0段的配置如下。Myser本机设置为固定IP192.168.0.5。
shared-network Vlan-0 {
subnet 192.168.0.0 netmask 255.255.255.0 {
option routers 192.168.0.254;
range 192.168.0.200 192.168.0.249;
}
} 1、你清除那个DHCP租约再重新统计一次，结果贴上来。
2、DHCPD的配置贴上来。 # dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "domain.com";
option domain-name-servers 192.168.0.1;
default-lease-time 3600;
max-lease-time 10800;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
# ad-hoc DNS update scheme - set to "none" to disable dynamic DNS updates.
ddns-update-style ad-hoc;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
shared-network Vlan-0 {
subnet 192.168.0.0 netmask 255.255.255.0 {
option routers 192.168.0.1;
range 192.168.0.200 192.168.0.249;
}
}
shared-network Vlan-1 {
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
range 192.168.1.101 192.168.1.249;
}
}
shared-network Vlan-2 {
subnet 192.168.2.0 netmask 255.255.255.0 {
option routers 192.168.2.1;
range 192.168.2.101 192.168.2.249;
}
}
shared-network Vlan-3 {
subnet 192.168.3.0 netmask 255.255.255.0 {
option routers 192.168.3.1;
range 192.168.3.101 192.168.3.249;
}
}
echo "">/var/db/dhcpd/dhcpd.leases
tail -f /var/db/dhcpd/dhcpd.leases
lease 192.168.0.240 {
starts 3 2009/05/13 02:13:03;
ends 3 2009/05/13 03:13:03;
binding state active;
next binding state free;
hardware ethernet 00:e0:4c:39:02:db;
uid "\001RAS \000\340L9\002\333\000\000\007\000\000\000";
client-hostname "s-k12";
}
lease 192.168.0.239 {
starts 3 2009/05/13 02:13:03;
ends 3 2009/05/13 03:13:03;
binding state active;
next binding state free;
hardware ethernet 00:02:55:d6:ba:6d;
uid "\001RAS \000\002U\326\272\215\000\000\000\000\000\000";
client-hostname "Myser";
}
lease 192.168.1.249 {
starts 3 2009/05/13 02:13:06;
ends 3 2009/05/13 03:13:06;
binding state active;
next binding state free;
hardware ethernet 00:23:4e:db:a6:8b;
uid "\001\000#N\333\246\213";
client-hostname "Lenovo-PC";
}
lease 192.168.0.238 {
starts 3 2009/05/13 02:13:07;
ends 3 2009/05/13 03:13:07;
binding state active;
next binding state free;
hardware ethernet 00:e0:4c:39:02:db;
uid "\001RAS \000\340L9\002\333\000\000\006\000\000\000";
client-hostname "s-k12";
}
lease 192.168.2.243 {
starts 3 2009/05/13 02:13:09;
ends 3 2009/05/13 03:13:09;
binding state active;
next binding state free;
hardware ethernet 00:21:00:b9:db:87;
uid "\001\000!\000\271\333\207";
client-hostname "cic";
}
lease 192.168.0.237 {
starts 3 2009/05/13 02:13:12;
ends 3 2009/05/13 03:13:12;
binding state active;
next binding state free;
hardware ethernet 00:02:55:d6:ba:6d;
uid "\001RAS \000\002U\326\272\215\000\000\006\000\000\000";
client-hostname "Myser";
}
lease 192.168.2.109 {
starts 3 2009/05/13 02:13:12;
ends 3 2009/05/13 03:13:12;
binding state active;
next binding state free;
hardware ethernet 00:11:5b:53:5c:fa;
uid "\001\000\021[S\\\372";
client-hostname "PC-20090108FWCW";
}
lease 192.168.2.142 {
starts 3 2009/05/13 02:13:12;
ends 3 2009/05/13 03:13:12;
binding state active;
next binding state free;
hardware ethernet 00:11:5b:d7:5e:97;
uid "\001\000\021[\327^\227";
client-hostname "WWW-CF8FB9A3E5E";
}
lease 192.168.0.236 {
starts 3 2009/05/13 02:13:15;
ends 3 2009/05/13 03:13:15;
binding state active;
next binding state free;
hardware ethernet 00:e0:4c:39:02:db;
uid "\001RAS \000\340L9\002\333\000\000\001\000\000\000";
client-hostname "s-k12";
}
lease 192.168.0.235 {
starts 3 2009/05/13 02:13:17;
ends 3 2009/05/13 03:13:17;
binding state active;
next binding state free;
hardware ethernet 00:e0:4c:39:02:db;
uid "\001RAS \000\340L9\002\333\000\000\002\000\000\000";
client-hostname "s-k12";
}
lease 192.168.2.115 {
starts 3 2009/05/13 02:13:19;
ends 3 2009/05/13 03:13:19;
binding state active;
next binding state free;
hardware ethernet 00:21:00:c3:a1:9f;
uid "\001\000!\000\303\241\237";
client-hostname "Lenovo-PC";
}
lease 192.168.0.234 {
starts 3 2009/05/13 02:13:21;
ends 3 2009/05/13 03:13:21;
binding state active;
next binding state free;
hardware ethernet 00:e0:4c:39:02:db;
uid "\001RAS \000\340L9\002\333\000\000\010\000\000\000";
client-hostname "s-k12";
}
注：主机s-k12和Myser都是网内固定IP的机器。
[ 本帖最后由 dylibin 于 2009-5-13 10:34 编辑 ] 是这样的：
1、没看到配置中有保留IP配置项
2、试一下在每个shared-network中加入192.168.0.x网段，但地址范围不要冲突。因为你的服务器的地址时192.168.0.1的。 原帖由 helon 于 2009-5-13 10:48 发表 http://bbs2.chinaunix.net/images/common/back.gif
是这样的：
1、没看到配置中有保留IP配置项
2、试一下在每个shared-network中加入192.168.0.x网段，但地址范围不要冲突。因为你的服务器的地址时192.168.0.1的。
配置中是没有保留项，因为每个网段分配的地址范围都有保留，固定IP的机器不可能与动态IP有冲突。
不明白“在每个shared-network中加入192.168.0.x网段”是什么意思。 starts 3 2009/05/13 02:13:03;
ends 3 2009/05/13 03:13:03;
02:13:03是2点13分03秒吗？为什么不是分配地址的时间，现在明明是上午，我的机器的系统时间没有问题呀。这个2点是凌晨2点吗？一直都没仔细观察过，原来不明白的地方还蛮多。
[ 本帖最后由 dylibin 于 2009-5-13 11:37 编辑 ] lease 192.168.0.240 {
starts 3 2009/05/13 02:13:03;
ends 3 2009/05/13 03:13:03;
binding state active;
next binding state free;
hardware ethernet 00:e0:4c:39:02:db;
uid "\001RAS \000\340L9\002\333\000\000\007\000\000\000";
client-hostname "s-k12";
}
lease 192.168.0.239 {
starts 3 2009/05/13 02:13:03;
ends 3 2009/05/13 03:13:03;
binding state active;
next binding state free;
hardware ethernet 00:02:55:d6:ba:6d;
uid "\001RAS \000\002U\326\272\215\000\000\000\000\000\000";
client-hostname "Myser";
}
你核对一下机器的MAC地址是不是和真是的机器是一致的，我咋怀疑有重名的机器呢。
另外机器时间最好调正确，不过这个和DHCP没关系的，仅影响到日志。 你核对一下机器的MAC地址是不是和真是的机器是一致的，我咋怀疑有重名的机器呢。
另外机器时间最好调正确，不过这个和DHCP没关系的，仅影响到日志。
s-k12和Myser两台机器的MAC和对应的机器是一致的.我注意到lenovo-pc是有重名的现象，那是因为有一批电脑是经销商安装的系统。我搞不清楚的就是，为什么指定IP的机器，DHCP也要分配租期，而且好像是这个IP还不断的变化。
另外机器的时间是正常的，都定期ntpdate，不存在不正确的问题。
Web# date
Wed May 13 15:08:37 CST 2009
[ 本帖最后由 dylibin 于 2009-5-13 15:08 编辑 ]