make_tape_recovery 磁带备份报错，找不到什么原因，帮帮忙！
贴recovery.log 出来给大家一起分析看看！一起找找原因# more recovery.log
=======09/10/09 17:58:16 EATStarted make_tape_recovery. (Thu Sep 10
17:58:16 EAT 2009)
@(#) Ignite-UX Revision B.4.4.12
@(#) net_recovery (opt) $Revision: 10.611 $
* Testing pax for needed patch
* Passed pax tests.
* Recovery Archive Description = Recovery Archive
* Recovery Archive Location = /dev/rmt/18mnb
* Number of Archives to Save = 2
* Pax type= tar
In? dsk/vgname minor#Associated disks/mountpoints
0 x /dev/vx/dsk/rootdg N/A /dev/dsk/c2t6d0 /dev/dsk/c6t6d0
/dev/vx/dsk/rootdg/data /data 0
/dev/vx/dsk/rootdg/oracle /oracle 0
0 x /dev/vx/dsk/dmxdg N/A /dev/dsk/c32t9d5 /dev/dsk/c32t9d6 /dev/dsk/c32t9d7 /dev/dsk/c32t10d0 /dev/ds
k/c32t10d1 /dev/dsk/c32t10d2 /dev/dsk/c32t10d3 /dev/dsk/c32t10d4
/dev/vx/dsk/dmxdg/data1 /d1 0
2 v /dev/vg00 0x00 /dev/dsk/c0t6d0 /dev/dsk/c4t6d0
/dev/vg00/lvol1 /stand2
/dev/vg00/lvol2
/dev/vg00/swap
/dev/vg00/lvol3 / 2
/dev/vg00/lvol4 /tmp 2
/dev/vg00/lvol5 /home 2
/dev/vg00/lvol6 /opt 2
/dev/vg00/lvol7 /usr 2
/dev/vg00/lvol8 /var 2
/dev/vg00/lvswap1
** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive
* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2009-09-10,17:58/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -p -m /etc/lvmconf/vg00.mapfile /dev/vg00
vgexport: Volume group "/dev/vg00" is still active.
* Creating Control Configuration.
* Creating Archive File List
WARNING: Skipping symlink's target ('/var/adm/wtmp') because it is larger than
2GB, which is not supported.This file should be backed-up with your
normal system backup -- Value too large to be stored in data type
(errno = 72)
WARNING: Skipping file '/var/adm/wtmp' because it is larger than 2GB, which is
not supported.This file should be backed-up with your normal system
backup -- Value too large to be stored in data type (errno = 72)
WARNING: Skipping file '/var/adm/wtmp' because it is larger than 2GB, which is
not supported.This file should be backed-up with your normal system
backup -- Value too large to be stored in data type (errno = 72)
WARNING: list_expander returned a warning,please check the log file.
* Creating Archive Configuration
* /opt/ignite/bin/make_arch_config -c
/var/opt/ignite/recovery/2009-09-10,17:58/archive_cfg -g
/var/opt/ignite/recovery/2009-09-10,17:58/flist -n 2009-09-10,17:58 -r
64 -d Recovery\ Archive -t -i 1 -m t
* Saving the information about archive to
/var/opt/ignite/recovery/previews
* Creating The Tape Archive
* Checking configuration file for Syntax
Adding /opt/ignite/Version file to LIF.
* Writing boot LIF to tape
76902+1 records in
76902+1 records out
* Complete writing boot LIF onto tape.
* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/18mnb -t n -s
local -n 2009-09-10,17:58 -m t -w
/var/opt/ignite/recovery/2009-09-10,17:58/recovery.log -u -R -g
/var/opt/ignite/recovery/2009-09-10,17:58/flist -a 29977840
* Preparing to create a system archive
* Archiving contents of Bill1 via tar image to local device/dev/rmt/18mnb.
pax: home/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc\mail\1250589128032 : No such file or directory
pax: home/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc\mail\1250643745112 : No su
ch file or directory
WARNING: The pax command returned a non-zero exit status (exit status 1)
WARNING: The pax command returned a non-zero exit status (exit status 1)
* Creation of system archive complete
NOTE:The following files are in the list of files that were on the
system, but they are no longer present.These files are not
included in the back-up:
/var/tmp/ign_configure/make_sys_image.log
/var/tmp/hsperfdata_coder/23469
ERROR: The make_sys_image command failed. The system recovery archive will
not be created.
=======09/10/09 19:47:33 EATmake_tape_recovery completed unsuccessfully 备份用的是内置的DDS4磁带机么？ 文件大小的限制吧。先查查相关的内核参数，修改掉。 是HP RP 8400 的机子，有接着HP DDS4 （TA 5300磁带机）
调内核参数，调那一个呢？
麻烦指点一下！ /dev/rmt/18mnb
指向的是你DDS4的磁带机么？ 有指向了，我的磁带机路经是/dev/rmt/18mnb
pax: home/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc
\mail\1250589128032 : No such file or directory
pax: home/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc
\mailhome/coder/ctei\webapps\oa\doc\mail\1250643745112 : No su
ch file or directory
WARNING: The pax command returned a non-zero exit status (exit status
1)
WARNING: The pax command returned a non-zero exit status (exit status 1)
这样子的提示是不是
home/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc
\mail\1250589128032
目录有问题！！！所以备份不了! 要备份的文件或者目录的问题，不存在或者权限问题。 目录下是不是有超大文件？ 有2地方：
=======
WARNING: Skipping file '/var/adm/wtmp' because it is larger than 2GB, which is
not supported.
和
pax: home/coder/ctei\webapps\oa\doc\mailhome/coder/ctei\webapps\oa\doc\mail\1250589128032 : No such file or directory
WARNING: The pax command returned a non-zero exit status (exit status 1) 检查一下有问题的目录
页:
[1]
2