关于legato做jbconfig的一个问提

wo6718573 发表于 2009-12-04 13:47

C:\Documents and Settings\Administrator>inquire
scsidev@0.0.0:Maxtor 6E040L0       NAR6|Disk, \\.\PHYSICALDRIVE0
scsidev@4.0.0:IBM ULT3580-TD2 4772|Tape, \\.\Tape0
scsidev@5.0.0:STK L180          0315|Autochanger (Jukebox)

C:\Documents and Settings\Administrator>jbconfig
      1) Install a SmartMedia Jukebox.
      2) Install an Autodetected SCSI Jukebox.
      3) Install an Autodetected NDMP SCSI Jukebox.
      4) Install an SJI Jukebox.
      5) Install an STL Silo.

What kind of Jukebox are you installing? 2
These are the SCSI Jukeboxes currently attached to your system:
1) scsidev@5.0.0: Standard SCSI Jukebox, Vendor <STK>, Product <L180>
Which one do you want to install? 1
Installing an 'Standard SCSI Jukebox' jukebox.
Name you would like to assign to the jukebox device? STK_L180
A brief description of the jukebox device? [scsidev@5.0.0: Standard SCSI Jukebox
]
Pathname of the control port for the jukebox device? [scsidev@5.0.0]
Unable to access device "Standard SCSI Jukebox" on control port "scsidev@5.0.0".

There appears to be something incorrect about your driver
installation.Please consult your driver documentation
to help you troubleshoot your installation.

昨天通过一次，但是在软件里任何操作都不可用，做mount,label 都不能执行。高手帮忙！！！！

redwaves 发表于 2009-12-04 13:53

带机的驱动有问题。

wo6718573 发表于 2009-12-04 13:58

回复 #2 redwaves 的帖子

我也这么怀疑，但是我从IBM FTP下了四个不同版本的LTO2的驱动都不行！我记的我昨天成功之前我是用NBU将这个驱动器加上的驱动，今天怎么弄都不行了
、

wolfheader 发表于 2009-12-04 14:24

用NBU加载了带机的驱动，然后用legato成功配置了jbconfig？

wo6718573 发表于 2009-12-04 14:40

回复 #4 wolfheader 的帖子

恩 jbconfig到最后提示成功。但是软件里面都不能操作。所以有删了。刚刚又找可个驱动，貌似可以，就是jbconfig最后没成功。研究中。。。这个是不也和stk l180的驱动有关？设备管理器里面显示介质转换器是unknow madium changer 这 L180驱动找不到了

wolfheader 发表于 2009-12-04 14:55

原帖由 wo6718573 于 2009-12-4 14:40 发表 http://bbs2.chinaunix.net/images/common/back.gif
恩 jbconfig到最后提示成功。但是软件里面都不能操作。所以有删了。刚刚又找可个驱动，貌似可以，就是jbconfig最后没成功。研究中。。。这个是不也和stk l180的驱动有关？设备管理器里面显示介质 ...

跟changer驱动没关系

你可以参考下面几个命令测试一下带库状态

# sjisn scsidev@2.0.0
Serial Number data for scsidev@2.0.0 (STK    L180          ):
   Library:
            Serial Number: 1RU9S00208
            SCSI-3 Device Identifiers:
                     ATNN=STK L180          1RU9S00208
   Drive at element address 500:
            SCSI-3 Device Identifiers:
                     VENN=1RU9S00209
   Drive at element address 501:
            SCSI-3 Device Identifiers:
                     VENN=1RU9S0020A
#sjiinq scsidev@2.0.0
scsidev@2.0.0:<STK L180          >
# sjirdp scsidev@2.0.0
scsidev@2.0.0 has 2 DATA TRANSPORT Element(s) starting at address 1
scsidev@2.0.0 has 1 MEDIA TRANSPORT Element(s) starting at address 1
scsidev@2.0.0 has12 STORAGE Element(s) starting at address 1
scsidev@2.0.0 has 4 IMPORT/EXPORT Element(s) starting at address 1
# sjirjc scsidev@2.0.0

            Device: scsidev@2.0.0

               Number of Drives: 2
            Number Drive Pairs: 1
Number of Import/Export Elements: 4
   Number of Import/Export Pairs: 1
               Number of Slots: 12
            Number of Slot Pairs: 1
   Number of Transport Elements: 1
      Number of Transport Pairs: 1

   Volume Tags Supported
Initialize Element Status Supported
# sjimm 2.0.0 slot 1 drive 1

redwaves 发表于 2009-12-04 19:26

还要看你的带库配置对不对

gesture 发表于 2009-12-04 20:57

看着命令满亲切的哈,路过 :lol:

bwjt654321 发表于 2009-12-04 20:58

太深奥了

wo6718573 发表于 2009-12-07 11:09

回复 #2 redwaves 的帖子

带库还要怎么配置？我这里只有一个驱动器，fc的，带库也没什么啊没有什么分区，逻辑库也就一个

页: [1] 2

Chinaunix's Archiver