求教informix online.log中每隔五分钟报25580错误
求教informix online.log中每隔五分钟报25580错误.已经很长时间了,网上能查到的信息不是很多,有遇到过的朋友请帮忙看下,谢谢!下面是一些日志和informix的参数，如需提供其它参数配置我再补充。
14:01:12Maximum server connections 219
14:02:09listener-thread: err = -25580: oserr = 1: errstr = : System error occu
rred in network function.
System error = 1.
14:06:12Fuzzy Checkpoint Completed:duration was 0 seconds, 611 buffers not f
lushed.
14:06:12Checkpoint loguniq 14895, logpos 0x23d9de4, timestamp: 0x3a7059f7
14:06:12Maximum server connections 219
14:07:09listener-thread: err = -25580: oserr = 1: errstr = : System error occu
rred in network function.
System error = 1.
14:11:12Fuzzy Checkpoint Completed:duration was 0 seconds, 615 buffers not f
lushed.
14:11:12Checkpoint loguniq 14895, logpos 0x23e7130, timestamp: 0x3a70bca1
14:11:12Maximum server connections 219
14:12:09listener-thread: err = -25580: oserr = 1: errstr = : System error occu
rred in network function.
System error = 1.
同时,系统有如下报错,但时间点上跟online.log的不一致,不知道是否有关系.
ibmp520a#errpt |more
IDENTIFIER TIMESTAMPT C RESOURCE_NAMEDESCRIPTION
7F88E76D 1230140809 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230140709 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230140509 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230140409 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230140209 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230140109 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230140009 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135809 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135709 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135609 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135409 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135309 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135109 P S console SOFTWARE PROGRAM ERROR
7F88E76D 1230135009 P S console SOFTWARE PROGRAM ERROR
ibmp520a#errpt -a |more
---------------------------------------------------------------------------
LABEL: CONSOLE
IDENTIFIER: 7F88E76D
Date/Time: Wed Dec 30 14:11:25 2009
Sequence Number: 140961
Machine Id: 000A69B0D700
Node Id: ibmp520a
Class: S
Type: PERM
Resource Name: console
Description
SOFTWARE PROGRAM ERROR
Probable Causes
SOFTWARE PROGRAM
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
REVIEW DETAILED DATA
Detail Data
USER'S PROCESS ID:
2457768
DETECTING MODULE
conlog
FAILING MODULE
FP_OPEN
RETURN CODE
13
ERROR CODE
0
---------------------------------------------------------------------------
小机参数:
System Model: IBM,9131-52A
Machine Serial Number:
Processor Type: PowerPC_POWER5
Number Of Processors: 4
Processor Clock Speed: 1648 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
Memory Size: 7936 MB
Good Memory Size: 7936 MB
Platform Firmware level: Not Available
Firmware Version: IBM,SF240_332
Console Login: enable
Auto Restart: true
Full Core: false
onstat -c
IBM Informix Dynamic Server Version 9.40.FC8XA -- On-Line -- Up 90 days 09:32:12 -- 3756304 Kbytes
Configuration File: /informix/etc/onconfig.ibma
# Root Dbspace Configuration
ROOTNAME rootdbs # Root dbspace name
ROOTPATH /dev/rlva_root# Path for device containing root dbspace
ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes)
ROOTSIZE 100000 # Size of root dbspace (Kbytes)
# Disk Mirroring Configuration Parameters
MIRROR 0 # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH # Path for device containing mirrored root
MIRROROFFSET 0 # Offset into mirrored device (Kbytes)
# Physical Log Configuration
PHYSDBS logdbs # Location (dbspace) of physical log
PHYSFILE 400000 # Physical log file size (Kbytes)
# Logical Log Configuration
LOGFILES 20 # Number of logical log files
LOGSIZE 2000 # Logical log size (Kbytes)
LOG_BACKUP_MODE MANUAL # Logical log backup mode (MANUAL, CONT)
# Security
# DBCREATE_PERMISSION:
# By default any user can create a database. Uncomment DBCREATE_PERMISSON to
# limit database creation to a specific user. Add a new DBCREATE_PERMISSION
# line for each permitted user.
#DBCREATE_PERMISSION informix
# DB_LIBRARY_PATH $INFORMIXDIR/extend
# Diagnostics
MSGPATH /informix/online.log # System message log file path
CONSOLE /dev/console # System console message path
# To automatically backup logical logs, edit alarmprogram.sh and set
BACKUPLOGS=Y
#ALARMPROGRAM /informix/etc/alarmprogram.sh # Alarm program path
ALARMPROGRAM /informix/etc/log_full.sh # Alarm program path
TBLSPACE_STATS1 # Maintain tblspace statistics
# System Archive Tape Device
#TAPEDEV /dev/tapedev # Tape device path
#TAPEDEV /dev/null # Tape device path
TAPEDEV /informix/log_file/log_files # Tape device path
#TAPEDEV visionsky # Tape device path
TAPEBLK 32 # Tape block size (Kbytes)
TAPESIZE 1024000 # Maximum amount of data to put on tape (Kbytes)
# Log Archive Tape Device
#LTAPEDEV /dev/tapedev # Log tape device path
#LTAPEDEV /dev/null # Log tape device path
LTAPEDEV /informix/log_file/log_files # Log Tape device path
#LTAPEDEV visionsky # Log Tape device path
LTAPEBLK 32 # Log tape block size (Kbytes)
LTAPESIZE 1024000 # Max amount of data to put on log tape (Kbytes)
# Optical
STAGEBLOB # Informix Dynamic Server staging area
# System Configuration
SERVERNUM 0 # Unique id corresponding to a OnLine instance
DBSERVERNAME shm_ibma # Name of default database server
DBSERVERALIASES tcp_ibma # of alternate dbservernames
NETTYPE ipcshm,1,100,CPU # Configure poll thread(s) for nettype
NETTYPE soctcp,2,300,NET # Configure poll thread(s) for nettype
DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env.
RESIDENT 1 # Forced residency flag (Yes = 1, No = 0)
MULTIPROCESSOR1 # 0 for single-processor, 1 for multi-processor
NUMCPUVPS 8 # Number of user (cpu) vps
SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps to one
NOAGE 0 # Process aging
AFF_SPROC 0 # Affinity start processor
AFF_NPROCS 8 # Affinity number of processors
# Shared Memory Parameters
LOCKS 2000000 # Maximum number of locks
BUFFERS 700000 # Maximum number of shared buffers
NUMAIOVPS 2 # Number of IO vps
PHYSBUFF 1024 # Physical log buffer size (Kbytes)
LOGBUFF 1024 # Logical log buffer size (Kbytes)
CLEANERS 12 # Number of buffer cleaner processes
SHMBASE 0x700000000000000 # Shared memory base address
SHMVIRTSIZE 128000 # initial virtual shared memory segment size
SHMADD 40960 # Size of new shared memory segments (Kbytes)
EXTSHMADD 40960 # Size of new extension shared memory segments (
Kbytes)
SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited
CKPTINTVL 300 # Check point interval (in sec)
LRUS 12 # Number of LRU queues
LRU_MAX_DIRTY 20.000000 # LRU percent dirty begin cleaning limit
LRU_MIN_DIRTY 10.000000 # LRU percent dirty end cleaning limit
TXTIMEOUT 0x12c # Transaction timeout (in sec)
STACKSIZE 64
# DYNAMIC_LOGS:
# 2 : server automatically add a new logical log when necessary. (ON)
# 1 : notify DBA to add new logical logs when necessary. (ON)
# 0 : cannot add logical log on the fly. (OFF)
#
# When dynamic logging is on, we can have higher values for LTXHWM/LTXEHWM,
# because the server can add new logical logs during long transaction rollback.
# However, to limit the number of new logical logs being added, LTXHWM/LTXEHWM
# can be set to smaller values.
#
# If dynamic logging is off, LTXHWM/LTXEHWM need to be set to smaller values
# to avoid long transaction rollback hanging the server due to lack of logical
# log space, i.e. 50/60 or lower.
#
# In case of system configured with CDR the difference between LTXHWM and
# LTXEHWM should be atleast 30% so that we could minimize log overrun issue.
DYNAMIC_LOGS 2
LTXHWM 70
LTXEHWM 80
# System Page Size
# BUFFSIZE - OnLine no longer supports this configuration parameter.
# To determine the page size used by OnLine on your platform
# see the last line of output from the command, 'onstat -b'.
# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an offline restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.
OFF_RECVRY_THREADS 10 # Default number of offline worker threads
ON_RECVRY_THREADS 1 # Default number of online worker threads
# Data Replication Variables
DRINTERVAL 30 # DR max time between DR buffer flushes (in sec)
DRTIMEOUT 30 # DR network timeout (in sec)
DRLOSTFOUND /informix/etc/dr.lostfound # DR lost+found file path
# CDR Variables
CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional)
CDR_DSLOCKWAIT5 # DS lockwait timeout (seconds)
CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR queue (Kbytes)
CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0 none, 9 max)
CDR_SERIAL 0,0 # Serial Column Sequence
CDR_DBSPACE # dbspace for syscdr database
CDR_QHDR_DBSPACE # CDR queue dbspace (default same as catalog)
CDR_QDATA_SBSPACE # List of CDR queue smart blob spaces
# CDR_MAX_DYNAMIC_LOGS
# -1 => unlimited
#0 => disable dynamic log addition
# >0 => limit the no. of dynamic log additions with the specified value.
# Max dynamic log requests that CDR can make within one server session.
CDR_MAX_DYNAMIC_LOGS 0 # Dynamic log addition disabled by default
# Backup/Restore variables
BAR_ACT_LOG /informix/bar_act.log # ON-Bar Log file - not in /tmp please
BAR_DEBUG_LOG /informix/bar_dbug.log # ON-Bar Debug Log - not in /tmp please
BAR_MAX_BACKUP1
BAR_RETRY 1
BAR_NB_XPORT_COUNT 10
BAR_XFER_BUF_SIZE 61440
RESTARTABLE_RESTORE on
BAR_PROGRESS_FREQ 0
#BAR_BSALIB_PATH /usr/lib/ibsad001.a
# Informix Storage Manager variables
#ISM_DATA_POOL ISMData
#ISM_LOG_POOL ISMLogs
BAR_BSALIB_PATH/usr/lib/libxnmi.o.1
# Read Ahead Variables
RA_PAGES 1024 # Number of pages to attempt to read ahead
RA_THRESHOLD 512 # Number of pages left before next group
# DBSPACETEMP:
DBSPACETEMP tmpdbs1:tmpdbs2:tmpdbs3:tmpdbs4 # Default temp dbspaces
# DUMP*:
DUMPDIR /informix # Preserve diagnostics in this directory
DUMPSHMEM 0 # Dump a copy of shared memory
DUMPGCORE 0 # Dump a core image using 'gcore'
DUMPCORE 0 # Dump a core image (Warning:this aborts OnLine)
DUMPCNT 1 # Number of shared memory or gcore dumps for
# a single user's session
FILLFACTOR 90 # Fill factor for building indexes
# method for OnLine to use when determining current time
USEOSTIME 0 # 0: use internal time(fast), 1: get time from O
S(slow)
# Parallel Database Queries (pdq)
MAX_PDQPRIORITY 100 # Maximum allowed pdqpriority
DS_MAX_QUERIES # Maximum number of decision support queries
DS_TOTAL_MEMORY # Decision support memory (Kbytes)
DS_MAX_SCANS 1048576 # Maximum number of decision support scans
DATASKIP off # List of dbspaces to skip
# OPTCOMPIND
OPTCOMPIND 2 # To hint the optimizer
DIRECTIVES 1 # Optimizer DIRECTIVES ON (1/Default) or OFF (0)
ONDBSPACEDOWN 2 # Dbspace down option: 0 = CONTINUE, 1 = ABORT,
2 = WAIT
OPCACHEMAX 0 # Maximum optical cache size (Kbytes)
# HETERO_COMMIT (Gateway participation in distributed transactions)
# 1 => Heterogeneous Commit is enabled
# 0 (or any other value) => Heterogeneous Commit is disabled
HETERO_COMMIT 0
SBSPACENAME # Default smartblob space name - this is where b
lobs
# go if no sbspace is specified when the smartblob is
# created. It is also used by some datablades as
# the location to put their smartblobs.
SYSSBSPACENAME # Default smartblob space for use by the Informi
x
# Server. This is used primarily for Informix Server
# system statistics collection.
BLOCKTIMEOUT 3600 # Default timeout for system block
SYSALARMPROGRAM /informix/etc/evidence.sh # System Alarm program path
# Optimization goal: -1 = ALL_ROWS(Default), 0 = FIRST_ROWS
OPT_GOAL -1
ALLOW_NEWLINE 0 # embedded newlines(Yes = 1, No = 0 or anything
but 1)
IFX_FOLDVIEW 0 # fold multiple tables or union all view with an
si joins
#
# The following are default settings for enabling Java in the database.
# Replace all occurrences of /usr/informix with the value of $INFORMIXDIR.
#VPCLASS jvp,num=1 # Number of JVPs to start with
JVPJAVAHOME /informix/extend/krakatoa/jre # JRE installation root directory
JVPHOME /informix/extend/krakatoa # Krakatoa installation directory
JVPPROPFILE /informix/extend/krakatoa/.jvpprops # JVP property file
JVPLOGFILE /informix/jvp.log # JVP log file.
JDKVERSION 1.3 # JDK version supported by this server
# The path to the JRE libraries relative to JVPJAVAHOME
JVPJAVALIB /bin
# The JRE libraries to use for the Java VM
JVPJAVAVM hpi:jvm:java:net:zip:jpeg
# use JVPARGS to change Java VM configuration
#To display jni call
#JVPARGS -verbose:jni
# Classpath to use upon Java VM start-up (use _g version for debugging)
#JVPCLASSPATH/informix/extend/krakatoa/krakatoa_g.jar:/informix/extend/krakatoa/jdbc_g.jar
JVPCLASSPATH /informix/extend/krakatoa/krakatoa.jar:/informix/extend/krakatoa/jdbc.jar :lol: :lol:
25580是件很麻烦很麻烦的事...
25580的含义是客户端发起连接到数据库,但未等数据库回应就断开了连接.....这个很难查找到具体是那个程序的原因.... 原帖由 kerom 于 2009-12-30 18:18 发表 http://bbs.chinaunix.net/images/common/back.gif
我碰到过，
上次用perl写了个检查脚本，是每十秒检查连一次库，没连清楚，出现了你所说的情况。
你认真找找，出现得这样有规律，肯定是某个定时程序造成的。
在lu那儿也发了帖子，居然没人回应。非常感谢楼上的回复。
正往这个方向上考虑，但是没有找到相应的东西，不知道是不是审计和监控的东西。发现原因了再来通报一下。 系统报错是aix 的/var/adm/ras/conslog 和/dev/console文件权限不对，你应该是重启过系统，重启后权限变了，informix没有写权限。
你可以修改
CONSOLE /dev/console 指定到文件重启数据库就行了。
页:
[1]