M4000上那些事需要申请service口令
有清单吗？ 板子被锁，就需要！ 有，看man clearfault，这个手册里面有你要的清单 老大说了 恢复出厂设置 说不定就可以 回复 3# bencyber在那里看？ service> man clearfault
System Administration clearfault(8)
NAME
clearfault -clear the faulty status of an FRU
SYNOPSIS
clearfault[-v] [-l] [-q -{y|n}] fru_device_path
clearfault-h
DESCRIPTION
The clearfault command clears the faulty status ofanFRU,
whichcan be displayed using the showstatus command. Clear-
ing faulty status is useful when manual diagnosis has deter-
minedthat the FRU is not faulty. If the FRU is not present
or is not marked faulty, an error message is displayed.
In some cases, the clearfault command cannot clearafault
withoutasystempowercycle. When this occurs, the user
will be prompted to check if a power cyclewillbeissued
afterclearfault completes its operation.If a power cycle
is not desired, clearfault will have no effectontheFRU
evenifapowercycleisoccurs. If a power cycle is
desired, the FRU will be considered faulty untilthepower
cycle occurs.
Privileges
You must be in service or escalation mode to runthiscom-
mand.
OPTIONS
The following options are supported:
-h Displays usagestatement.Whenusedwith
other options or operands, an error occurs.
-l Later option. This option forces a clearon
a reboot. This happens even if an FRU can be
immediately cleared.
-n Automatically answers n (no) to all prompts.
-q Quiet option. Suppresses all prompts.
-v Displays verbose output.
XCP Last change: September 2008 1
System Administration clearfault(8)
-y Automaticallyanswersy (yes) to all
prompts.
OPERANDS
The following operand is supported:
fru_device_path Specifies the device path for the FRU.Sam-
plevalue:/IOU#0.Referto the Extended
Description section for more detailed infor-
mation about FRUs.
EXTENDED DESCRIPTION
The tables in this section listdescriptionsofavailable
FRUsforthe M3000/M4000/M5000/M8000/M9000 servers. To use
these values for the fru_device_pathoperand,replacethe
variables, such as {0-3} and xy, with the correct values for
the FRUs in your system. Ranges of possibleintegervalues
aresetoffin braces ({}). When using the values the FRU
name will have one integer from the range,andthebraces
areomitted. For example, the descriptor /FAN_A#{0-1} could
have one of these values: /FAN_A#0 or /FAN_A#1.
Descriptions of some FRU names containing MEM include xand
yvariables,where x represents an integer from 0-3, and y
represents a character, either A or B. For example, a sample
value for thedescriptor/CMU#{0-3}/MEM#xxywouldbe
/CMU#1/MEM#11B.
This table lists available FRUs for the M3000 server:
Unit M3000 Server
Motherboard /MBU_A
DDC A on MBU /MBU_A/DDC_A#{0-1}
DDC B on MBU /MBU_A/DDC_B
Memory DIMM /MBU_A/MEM#{0-7}
Fan BP B /FANBP_B
Fan A /FAN_A#{0-1}
Operator Panel /OPNL
Power Supply /PSU#{0-1}
XSCF Unit /XSCFU
This table lists available FRUs for the M4000/M5000 servers:
Unit M4000 Server M5000 Server
Motherboard /MBU_A /MBU_B
XCP Last change: September 2008 2
System Administration clearfault(8)
CPU Module /MBU_A/CPUM#{0-1} /MBU_B/CPUM#{0-3}
DDC A on MBU /MBU_A/DDC_A#{0-1} /MBU_B/DDC_A#{0-3}
DDC B on MBU /MBU_A/DDC_B /MBU_B/DDC_B#{0-1}
MEM Board /MBU_A/MEMB#{0-3} /MBU_B/MEMB#{0-7}
Memory DIMM /MBU_A/MEMB#{0-3}/MEM#xy /MBU_A/MEMB#{0-7}/MEM#xy
I/O Unit /IOU /IOU#{0-1}
DDC A on IOU /IOU/DDC_A /IOU#{0-1}/DDC_A
DDC B on IOU /IOU/DDCR/DDC_B /IOU#{0-1}/DDCR/DDC_B
Fan BP A /FANBP_A
Fan BP B /FANBP_B
Fan BP C /FANBP_C
Fan A /FAN_A#{0-1} /FAN_A#{0-3}
Fan B /FAN_B#{0-1}
Operator Panel /OPNL /OPNL
Power Supply /PSU#{0-1} /PSU#{0-3}
XSCF Unit /XSCFU /XSCFU
External I/O IOU#0-PCI#{1-5} IOU#{0-1}-PCI#{1-5}
Expansion Unit
Link Card
(Server)
External I/O IOX@{nnnn}/IOB{0-1}/LINK IOX@{nnnn}/IOB{0-1}/LINK
Expansion Unit
Link Card (I/O
Boat)
External I/O IOX@{nnnn}/IOB{0-1} IOX@{nnnn}/IOB{0-1}
Expansion Unit
I/O Boat
External I/O IOX@{nnnn}/PS{0-1} IOX@{nnnn}/PS{0-1}
Expansion Unit
Power Supply
This table lists available FRUs for the M8000/M9000 servers:
Unit M8000 Server M9000 Server
CPU/Mem Unit /CMU#{0-3} /CMU#{0-15}
CPU Module /CMU#{0-3}/CPUM#{0-3} /CMU#{0-15}/CPUM#{0-3}
Memory DIMM /CMU#{0-3}/MEM#xxy /CMU#{0-15}/MEM#xxy
I/O Unit /IOU#{0-3} /IOU#{0-15}
Backplane /BP_A
Clock Unit /CLKU_B#{0-3}
DDC A on BP /DDC_A#{0-1}
CD-RW/DVD-RW Unit /DVD /DVD#{0-1}
Fan A /FAN_A#{0-3} /FAN_A#{0-15,20-35}
Fan B /FAN_B#{0-7}
Fan BP A /FANBP_A#{0-1}
Fan BP B /FANBP_B#{0-1}
Fan BP C /FANBP_C#{0-1}
Media BP /MEDBP /MEDBP#{0-1}
Operator Panel /OPNL /OPNL#{0-1}
Power Supply /PSU#{0-8,40-48} /PSU#{0-14,20-34,40-54,60-74}
XCP Last change: September 2008 3
System Administration clearfault(8)
Switch BP /SWBP /SWBP#{0-1}
Tape Unit /TAPE /TAPE#{0-1}
Crossbar Unit /XBU_B#{0-15}
XSCF Unit /XSCFU_B#{0-1} /XSCFU_B#{0-1}
XSCF C /XSCFU_C#{0-1}
External I/O IOU#{0-3}-PCI#{0-7} IOU#{0-15}-PCI#{0-7}
Expansion Unit
Link Card
(Server)
External I/O IOX@{nnnn}/IOB{0-1}/LINK IOX@{nnnn}/IOB{0-1}/LINK
Expansion Unit
LinkCard (I/O
Boat)
External I/O IOX@{nnnn}/IOB{0-1} IOX@{nnnn}/IOB{0-1}
Expansion Unit
I/O Boat
External I/O IOX@{nnnn} /PS{0-1} IOX@{nnnn}/PS{0-1}
Expansion Unit
Power Supply
EXAMPLES
Example 1: Clearing the Fault Status of an FRU
service> clearfault /MBU_B/CPUM#0
Example 2: Clearing the FaultStatusofanExternalI/O
Expansion Unit Power Supply
service> clearfault IOX@X06E/PS0
Example 3: Using clearfault on an FRU ThatRequiresManual
Reset
service> clearfault /MBU_B
clearfault: Fault cannot be cleared for this FRU.
Example 4: Using clearfault on an FRU That Requires aPlat-
form Power Cycle
service> clearfault /IOU#0
clearfault: Fault cannot be cleared for this FRU.
FRU will be marked to clear fault on next circuit breaker off and on.
Continue? : y
Fault will be cleared after circuit breaker off and on
Example 5: Clear the Fault Status of an FRU Only After Plat-
form Power Cycle
service> clearfault -l /FAN_A#0
Fault will be cleared after circuit breaker off and on
XCP Last change: September 2008 4
System Administration clearfault(8)
Example 6: Answering "no" to all clearfault Prompts
service> clearfault -qn /IOU#0
clearfault: Fault cannot be cleared for this FRU.
Example 7: Answering "yes" to all clearfault Prompts
service> clearfault -qy /IOU#0
clearfault: Fault cannot be cleared for this FRU.
Fault will be cleared after circuit breaker off and on
Example 8: Using clearfault on an FRU That Is Not Faulty
service> clearfault -v /MBU_B/CPUM#0
clearfault: FRU is not faulty
Example 9: Using clearfault on an FRU That Is Not Installed
service> clearfault /MBU_B/CPUM#3
clearfault: FRU not present
Example 10: Using clearfault With an Invalid FRU Name
service> clearfault /MUB_B
clearfault: FRU not valid
SEE ALSO
replacefru(8), showstatus(8)
XCP Last change: September 2008 :em09:收藏了 不错,好东西. 第十个范例，出现clearfault: FRU not valid，是什么意思，应该怎么解决，各位老大请指教 收藏了:em27:
页:
[1]
2