请教一下，T2000的ALOM密码忘记，有没办法重置？
如题，我这个是富士通T2000. 能进系统的话可以这样：# cd /usr/platform
# ls #查看支持的型号，找出自己的机器型号#
# cd SUNW,XXXX #选择你的机器型号#
# cd sbin
# ./scadm help #使用帮助命令查看scadm可以执行的命令和作用#
scadm usershow => show user details
scadm userpassword <username> => set user password
如果不能进系统，有一个短接法什么来着，好像handbook上能找到，你网上搜搜:mrgreen:。。 How to reset the ALOM password on a Sun Fire T1000 or T2000 server
Note: physical access to the system so that the power cables can be accessed and a serial connection can be made to the system is required for this procedure.
1. Make a connection to the ALOM serial management port.
2. Power cycle the system by unplugging the server's power supplies, waiting several seconds and then plugging the power supplies back in.
3. You should see the ALOM booting on the serial management console. Hit "Esc" (the Escape key) during the ALOM boot, before or at the point: "Return to Boot Monitor for Handshake"
This will cause the system to produce the message: "Return to Boot Monitor for Handshake ESC keypress detected."
4. ALOM will now enter the "ALOM boot escape menu" and the following will be displayed:
ALOM <ESC> Menu
e - Erase ALOM NVRAM.
m - Run POST Menu.
R - Reset ALOM.
r - Return to bootmon.
Your selection:
5. To clear out the existing password you must choose 'e' to erase the ALOM NVRAM. After using the 'e' option to erase the NVRAM choose the 'r' option to resume the ALOM boot. You will automatically be logged in as user 'admin' with no password and no permissions. The NVRAM settings will be reset to their factory defaults. Note that since this procedure resets the NVRAM settings to their defaults any customization (such as the ALOM network settings) will need to be recreated.
The above procedure can be adapted for the two Blade products Sun Blade T6300
Server Module and Netra CP3060 Board, which also use the ALOM4v.
1. Ensure a working serial connection is made to the serial port at the front of the Blade.
2. Power cycle the board by powering off the server as per the relevant
architecture, unplug the Blade from the chassis, wait several seconds and then
plug the Blade back into the chassis.
Follow steps 3 to 5 above.
富士通的就不知道能不能用这个方法了:luya: 翻翻蜘蛛的精华帖:em27: 回复 3# 东方蜘蛛
试过，按ESC键没动静。。。。 蜘蛛正解 富士通的 T2000 就是面板是灰色的 其余都是跟sun的一样
页:
[1]