拔电源模块产生的信息
重启服务器后，拔插电源在/var/adm/messages都有message产生，如下；Mar 21 11:27:01 T5220146119 SC Alert: Fault | critical: SP detected fault at time Wed Mar 21 03:17:57 2012. Input power unavailable for PSU at PS1
Mar 21 11:27:02 T5220146119 HeartbeatFramework: VCS ERROR V-16-906-6 Icmp:select timed out. No host responded to the ICMP_ECHO sent in 20 seconds
Mar 21 11:28:02 T5220146119 last message repeated 1 time
Mar 21 11:28:37 T5220146119 SC Alert: IPMI | minor: ID = 3f : 03/21/2012 : 03:19:33 : Voltage : /PS1/AC_POK : State Asserted
Mar 21 11:28:57 T5220146119 SC Alert: Fault | minor: SP detected fault cleared at time Wed Mar 21 03:19:53 2012. Input power unavailable for PSU at PS1
Mar 21 11:29:02 T5220146119 HeartbeatFramework: VCS ERROR V-16-906-6 Icmp:select timed out. No host responded to the ICMP_ECHO sent in 20 seconds
但是手动修改了/var/adm/messages文件后，再进行拔插电源，就不会产生任何message，请大侠指教，谢谢!
Mar 21 11:29:02 T5220146119 HeartbeatFramework: VCS ERROR V-16-906-6 Icmp:select timed out. No host responded to the ICMP_ECHO sent in 20 seconds
============== 可以不用理会，如果你的业务允许机器宕机:-L 回复 2# 东方蜘蛛
现在是需要上报电源异常告警，所以需找到原因 本帖最后由 cwnlinux 于 2012-03-21 12:51 编辑
你拔插都没有日志那才叫奇怪呢
有日志才正常 有日志是正常的 我要知道的是为什么修改了messages就不会有日志？ 手动修改了/var/adm/messages文件? 对，手动在/var/adm/messages里面写了条日志，日后再进行插拔电源就不会有日志生成了
回复 7# yiguihuo
对，手动在/var/adm/messages里面写了条日志，日后再进行插拔电源就不会有日志生成了
页:
[1]