SUN Fire x4200 求助!! 找不到磁盘
本帖最后由 dt8u8dt8u8 于 2012-03-29 14:36 编辑小弟手上现在有一台 SUN Fire x4200,要安装 solaris 10 的系统。 每次到了 系统正在初始化,请等待。 然后就弹出
错误
没有找到硬盘。
请检查以确认硬盘已连接好并且通电。
按下“确定”以 “退出”。
每次到了这里就装不下去了。
我这个机子上面有两块硬盘。 我也不懂得是不是得装个什么RAID之类的。我什么都没做。 我希望大家帮帮。我都快愁死了!
各位高人,高抬贵手,帮我解决一下这个问题 Think U 有人懂吗 During BIOS POST initialization, please press "Ctrl+C", enter LSI BIOS utility,
Please check if your current raid volume is activated, if there were any hardware raid volumes.
I can not see any volumes in LSI configuration utility, maybe there were hardware error (flex cable, motherboard, disk backplane or disk itself). 应该是做raid了吧、 X4200需要先做RAID,才能装系统的 想办法进入RAID卡管理界面先!
页:
[1]