v445进不到ok状态求解.
v445进不到ok状态求解.通过串口开机后如下提示
Done
0>Interrupt Crosscall....Done
0>Init Memory....-?one
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....Done
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
SC Alert: Host System has Reset
Configuring system memory & CPU(s)
Probing system devices
Probing memory
ChassisSerialNumber 0739BD0E27
Probing I/O buses
Starting RTC ..
Probing system devices
Probing memory
ChassisSerialNumber 0739BD0E27
Probing I/O buses
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host. 按break没反映，按ctrl+break则提示这行，按#. 则退到sc状态
sc>
正常应该是
Starting RTC ..
Probing system devices
Probing memory
Probing I/O buses 这边再往下要能显示V445就ok，但一直在这一步就下不去了，到不了ok状态，这是什么原因？有没哪些大哥有遇到类似问题？怎么处理的？服务器前面面板灯都为绿色，没报错误灯
Starting RTC ..
Sun Fire V445, No Keyboard
Copyright 2006 Sun Microsystems, Inc.All rights reserved.
OpenBoot 4.22.19, 8192 MB memory installed, Serial #69983876.
Ethernet address 0:14:4f:2b:de:84, Host ID: 842bde84.
sc> showenvironment
=============== Environmental Status ===============
--------------------------------------------------------------------------------
System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------
Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
--------------------------------------------------------------------------------
C0.P0.T_CORE OK 76 -20 -10 0 108 113 120
C1.P0.T_CORE OK 73 -20 -10 0 108 113 120
C0.T_AMB OK 22 -20 -10 0 60 65 75
C1.T_AMB OK 22 -20 -10 0 60 65 75
FIRE.T_CORE OK 39 -20 -10 0 80 85 92
MB.IO_T_AMB OK 29 -20 -10 0 70 75 82
FIOB.T_AMB OK 23 -20 -10 0 47 52 59
MB.T_AMB OK 27 -20 -10 0 70 75 82
--------------------------------------
Keyswitch:
--------------------------------------
Keyswitch position: NORMAL
--------------------------------------------------------
System Indicator Status:
--------------------------------------------------------
SYS.LOCATE SYS.SERVICE SYS.ACT
--------------------------------------------------------
OFF OFF SLOW BLINK
--------------------------------------------------------
SYS.PSFAIL SYS.OVERTEMP SYS.FANFAIL
OFF OFF OFF
--------------------------------------------
System Disks:
--------------------------------------------
Disk Status ServiceOK2RM
--------------------------------------------
HDD0 OK OFF OFF
HDD1 OK OFF OFF
HDD2 OK OFF OFF
HDD3 OK OFF OFF
HDD4 OK OFF OFF
HDD5 OK OFF OFF
HDD6 OK OFF OFF
HDD7 OK OFF OFF
----------------------------------------------------------
Fans (Speeds Revolution Per Minute):
----------------------------------------------------------
Sensor Status Speed Warn Low
----------------------------------------------------------
FT0.F0.TACH OK 3552 -- 750
FT1.F0.TACH OK 3590 -- 750
FT2.F0.TACH OK 3515 -- 750
FT3.F0.TACH OK 3629 -- 750
FT4.F0.TACH OK 3590 -- 750
FT5.F0.TACH OK 3552 -- 750
--------------------------------------------------------------------------------
Voltage sensors (in Volts):
--------------------------------------------------------------------------------
Sensor Status Voltage LowSoft LowWarn HighWarn HighSoft
--------------------------------------------------------------------------------
MB.V_+1V0 OK 0.98 0.80 0.85 1.15 1.20
MB.V_+1V2 OK 1.17 0.96 1.02 1.38 1.44
MB.V_+1V5 OK 1.47 1.20 1.27 1.72 1.80
MB.V_+1V8 OK 1.79 1.44 1.53 2.07 2.16
MB.V_+2V5 OK 2.50 2.00 2.12 2.87 3.00
MB.V_+3V3 OK 3.26 2.64 2.80 3.79 3.96
MB.V_+3V3STBYOK 3.33 2.64 2.80 3.79 3.96
MB.V_+5V OK 5.02 4.00 4.25 5.75 6.00
MB.V_+12V OK 12.06 9.60 10.20 13.80 14.40
MB.V_-12V OK -12.04-14.40-13.80-10.20 -9.60
SC.BAT.V_BAT OK 3.07 2.25 2.26 3.75 3.75
--------------------------------------------
Power Supply Indicators:
--------------------------------------------
Supply Active StandbyService
--------------------------------------------
PS0 ON ON OFF
PS1 ON ON OFF
PS2 ON ON OFF
PS3 ON ON OFF
------------------------------------------------------------------------------
Power Supplies:
------------------------------------------------------------------------------
SupplyStatus UnderspeedOvertempOvervoltUndervoltOvercurrent
------------------------------------------------------------------------------
PS0 OK OFF OFF OFF OFF OFF
PS1 OK OFF OFF OFF OFF OFF
PS2 OK OFF OFF OFF OFF OFF
PS3 OK OFF OFF OFF OFF OFF
----------------------
Current sensors:
----------------------
Sensor Status
----------------------
MB.I_USB0 OK
MB.I_USB1 OK
FIOB.I_USB2 OK
FIOB.I_USB3 OK
MB.FF_POK OK
C0.P0.FF_POK OK
C1.P0.FF_POK OK
sc> console
Enter #. to return to ALOM.
sc> showsc version
Advanced Lights Out Manager v1.6.1
sc> showusers
username connection login time client IP addr console
-------- ---------- ---------- -------------- -------
admin serial APR 20 03:13
sc> poweron
The Host System Power is already running
sc> console -f
Enter #. to return to ALOM.
sc> console
Enter #. to return to ALOM.
sc> reset
Are you sure you want to reset the system ?y
SC Alert: SC Request to Reset Host.
SC Alert: Host System has Reset
sc> console -f
Enter #. to return to ALOM.
Done
0>Interrupt Crosscall....Done
0>Init Memory....\?one
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....Done
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
SC Alert: Host System has Reset
Configuring system memory & CPU(s)
Probing system devices
Probing memory
ChassisSerialNumber 0739BD0E27
Probing I/O buses
Probing system devices
Probing memory
ChassisSerialNumber 0739BD0E27
Probing I/O buses
到这就是进不到ok状态，导致无法重装系统. 先看看是否是有显示器的，输出转显示器去了吧IO buses:lol 没有显示器可以把bootmode改下 sc>
sc> bootmode
Bootmode: normal
sc>
sc> bootmode bootscript="setenv auto-boot? false"
sc> bootmode
Bootmode: normal
bootscript="setenv auto-boot? false"
sc>
sc> reset 回复 3# hejia0105
這樣解決你的問題了嗎?
回复 4# roger1402001
是的
不过有个前提就是完成 硬件检测。
回复 5# hejia0105
是有硬件的固障嗎?
回复 6# roger1402001
从你的信息来看也看不到有硬件错误。
会不会是 别人抢了你的终端？你的输入有反应吗？ 回复 7# hejia0105
謝謝提點~~~ 原來誤解樓主的意思了 :em03:
页:
[1]