Sun Storage 3510问题
May2 10:46:03 sunv440 fctl: WARNING: 35520=>fp(1)::GPN_ID for D_ID=10200 failedMay2 10:46:03 sunv440 fctl: WARNING: 35521=>fp(1)::N_x Port with D_ID=10200, PWWN=216000c0ff8a7e98 disappeared from fabric
May2 10:46:03 sunv440 fctl: WARNING: 35530=>fp(1)::GPN_ID for D_ID=10500 failed
May2 10:46:03 sunv440 fctl: WARNING: 35531=>fp(1)::N_x Port with D_ID=10500, PWWN=256000c0ffca7e98 disappeared from fabric
May2 10:46:03 sunv440 fctl: WARNING: 35541=>fp(0)::GPN_ID for D_ID=10200 failed
May2 10:46:03 sunv440 fctl: WARNING: 35542=>fp(0)::N_x Port with D_ID=10200, PWWN=226000c0ff9a7e98 disappeared from fabric
May2 10:46:04 sunv440 fctl: WARNING: 35574=>fp(0)::N_x Port with D_ID=10200, PWWN=226000c0ff9a7e98 reappeared in fabric
May2 10:46:05 sunv440 fctl: WARNING: 35619=>fp(1)::N_x Port with D_ID=10500, PWWN=256000c0ffca7e98 reappeared in fabric
May2 10:46:05 sunv440 fctl: WARNING: 35627=>fp(1)::N_x Port with D_ID=10200, PWWN=216000c0ff8a7e98 reappeared in fabric
May2 10:46:07 sunv440 scsi: WARNING: /scsi_vhci/ssd@g600c0ff0000000000a7e98652641e30a (ssd30):
May2 10:46:07 sunv440 Error for Command: write(10) Error Level: Retryable
May2 10:46:07 sunv440 scsi: Requested Block: 442161600 Error Block: 442161600
May2 10:46:07 sunv440 scsi: Vendor: SUN Serial Number: 652641E3-0A
May2 10:46:07 sunv440 scsi: Sense Key: Unit Attention
May2 10:46:07 sunv440 scsi: ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU
主机存储通过光纤交换机相连接,光纤交换检查应无问题,大家帮忙看看 登陆3510,showevent 查看, 还有 showconfig 。 回复 2# znnnz
show events只有电池充电的相关报错,这是什么原因呢? 回复 3# flztzy
我觉得吧,你至少应该把show config 和show events的结果贴出来。 查看SN:652641E3-0A 这个盘是本地盘,还是阵列上的盘; sccli> show events
Thu May3 13:25:00 2012
Notification
Controller BBU is Charging !
Thu May3 13:25:26 2012
Notification
NOTICE: Controller BBU Fully Charged !
Thu May3 13:25:27 2012
Notification
Controller BBU is Charging !
Thu May3 13:26:37 2012
Notification
NOTICE: Controller BBU Fully Charged !
SN:652641E3-0A是阵列上的盘 show events 贴出来了,show config 贴一下就这么困难吗? show config没有收集到,暂时无法收集,想问问大侠是软件问题,还是硬件问题啊 一条命令就这么难,你让大家怎么帮你分析的
页:
[1]