4800装完系统后，无法启动，scsi:no major number
最近碰到的问题很让人头疼这有一台4800，挂接D240，以前是两块36G的硬盘，现在换了两块73G的硬盘（重别的D240上拆下的旧盘），重新装solaris 10 U9系统，装系统的时候就比较慢，大概有4,5,个小时，装完后就起不来，各位大侠帮忙下，这种问题是硬盘的问题，还是D240 硬盘SCSI背板的问题？谢谢
有如下报错
sun Fire 4800
openFrimware version 5.20.11(09/22/08 04:56)
copyright 2008 sun microsystems, Inc.All rights reserved Use is subject to license terms.
smartFirmware,copyright (C)1966-2001.All right reserved.\
read failed
scsi:no major number
pci:no major number
pci:no major number
can not load drives for /ssm@0,0/pci@18600000/pci@1/scsi@2/disk@0,0:a
cant't load the root filesystem
Type"go" to resume debugger entered
{8} ok probe-scsi-all
/ssm@0,0/pci@1c,600000/pci@1/scsi@2,1
/ssm@0,0/pci@1c,600000/pci@1/scsi@2
/ssm@0,0/pci@1c,700000/SUNW,qlc@1
/ssm@0,0/pci@18,600000/pci@1/scsi@2,1
/ssm@0,0/pci@18,600000/pci@1/scsi@2
Target 0
Unit 0 Disk SEAGATE ST373207LSUN72G 045A
Target 1
Unit 0 Disk SEAGATE ST373207LSUN72G 045A
Target 2
Unit 0 Processor Sun D240 1.09
Target 3
Unit 0 Processor Sun D240 1.09
Target 4
Unit 0 Removable Tape HP C5683A C005
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M17111005
/ssm@0,0/pci@18,700000/SUNW,qlc@1
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down
{8} ok show-disks
a) /ramdisk-root
b) /ssm@0,0/pci@1c,600000/pci@1/scsi@2,1/disk
c) /ssm@0,0/pci@1c,600000/pci@1/scsi@2/disk
d) /ssm@0,0/pci@1c,700000/SUNW,qlc@1/fp@0,0/disk
e) /ssm@0,0/pci@18,600000/pci@1/scsi@2,1/disk
f) /ssm@0,0/pci@18,600000/pci@1/scsi@2/disk
g) /ssm@0,0/pci@18,700000/SUNW,qlc@1/fp@0,0/disk
q) NO SELECTION
Enter Selection, q to quit:
没准是你光盘坏了呢
页:
[1]