solaris11 system maintenance状态下，超级用户登录不了，咋办？急急急。。。
本帖最后由 Cleo_Z 于 2012-05-09 10:02 编辑系统进入维护状态，超级用户和任何用户都登陆不了，求教大神。。。。。。。怎么办？？？？？
该机器没有显示器接口，只能远程，
远程ssh和telnet都登入不了。。
只有通过XSCF登入，结果如下。。。
------------------------直接启动不成功，超级用户登录不了------------------------------------------
XSCF> console -d 0
Connect to DomainID 0? :y
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Enter user name for system maintenance (control-d to bypass): root
Enter root password (control-d to bypass):
Login incorrect or user root not authorized
Enter user name for system maintenance (control-d to bypass): root
Enter root password (control-d to bypass):
Login incorrect or user root not authorized
------------------------单用户模式，还是无法进入----------------------------
{0} ok boot -s
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@0,0:aFile and args: -s
SunOS Release 5.11 Version 11.0 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Booting to milestone "milestone/single-user:default".
WARNING: Automatic update of the boot archive failed.
Update the boot archive using 'bootadm update-archive'
command and then reboot the system from the same device that
was previously booted.
May9 01:38:40 svc.startd: svc:/system/filesystem/usr:default: Method "/lib/svc/method/fs-usr" failed with exit status 95.
May9 01:38:40 svc.startd: system/filesystem/usr:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
Console login service(s) cannot run
Enter user name for system maintenance (control-d to bypass): root
Enter root password (control-d to bypass): Hostname: solaris11
Login incorrect or user root not authorized
-------------------------------------------------------------如上----------------------------------
在线等。。。。。。。。。。。。
难道11现在有默认口令了？ 回复 2# znnnz
不知啊。。。。o(╯□╰)o。。在搞好没几天。。。就这样了。。。╮(╯▽╰)╭。。。求大牛帮忙。。。
回复 3# Cleo_Z
据说root的口令是solaris。你试试看。 回复 4# znnnz
Enter user name for system maintenance (control-d to bypass): root
Enter root password (control-d to bypass):
Login incorrect or user root not authorized
Enter user name for system maintenance (control-d to bypass): root
Enter root password (control-d to bypass):
Login incorrect or user root not authorized
Enter user name for system maintenance (control-d to bypass): root
Enter root password (control-d to bypass):
Login incorrect or user root not authorized
结局是一样的。。~~~~(>_<)~~~~ 。。。
回复 5# Cleo_Z
不会是你的root用户根本就没有设置口令吧，直接回车试试，不行的话，光盘启动到单用户清除口令吧。 回复 6# znnnz
{0} ok boot cdrom -s
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:fFile and args: -s
。。。。。。
--------------------------------------------------------------------------------------
卡在上面的状态好久了。。。o(╯□╰)o。。。这是啥原因啊。。 貌似文件系统有问题了，光盘到单用户下fsck下吧 回复 8# 东方蜘蛛
光盘到单用户下，是指的是boot cdrom -s么？
如果不是，怎么操作呢？
boot cdrom -s 就一直卡在那，不能继续下去。。。。。
{0} ok boot cdrom -s
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:fFile and args: -s
。。。。。。 本帖最后由 非凡公子 于 2012-05-10 10:02 编辑
solaris11都是zfs吧,不用fsck的吧
你是不是密码忘了?光盘启动清密码吧.自己安装的系统没有默认密码,光盘启动时的root密码是solaris