V890有一块CPU板上的内存认不到！

wenyy_unix 发表于 2012-05-15 12:49

V890操作系统下prtdiag命令输出如下(D板上的内存无法识别)：

System Configuration:Sun Microsystemssun4u Sun Fire V890
System clock frequency: 150 MHz
Memory size: 24576 Megabytes

========================= CPUs ===============================================

      Run E$CPU CPU
BrdCPU MHz MB Impl. Mask
--- ----- ---- ---- ------- ----
A0, 16 1800 32.0 US-IV+ 2.4
B1, 17 1800 32.0 US-IV+ 2.4
A2, 18 1800 32.0 US-IV+ 2.4
B3, 19 1800 32.0 US-IV+ 2.4
C4, 20 1800 32.0 US-IV+ 2.4
D5, 21 1800 32.0 US-IV+ 2.4
C6, 22 1800 32.0 US-IV+ 2.4
D7, 23 1800 32.0 US-IV+ 2.4

========================= Memory Configuration ===============================

      LogicalLogicalLogical
   MC Bank Bank Bank       DIMM InterleaveInterleaved
BrdID num    size Status    Size Factor    with
----------- ------ --------------------------------------
A 0 0    1024MB no_status 512MB 8-way    0
A 0 1    1024MB no_status 512MB 8-way    0
A 0 2    1024MB no_status 512MB 8-way    0
A 0 3    1024MB no_status 512MB 8-way    0
B 1 0    1024MB no_status 512MB 8-way    1
B 1 1    1024MB no_status 512MB 8-way    1
B 1 2    1024MB no_status 512MB 8-way    1
B 1 3    1024MB no_status 512MB 8-way    1
A 2 0    1024MB no_status 512MB 8-way    0
A 2 1    1024MB no_status 512MB 8-way    0
A 2 2    1024MB no_status 512MB 8-way    0
A 2 3    1024MB no_status 512MB 8-way    0
B 3 0    1024MB no_status 512MB 8-way    1
B 3 1    1024MB no_status 512MB 8-way    1
B 3 2    1024MB no_status 512MB 8-way    1
B 3 3    1024MB no_status 512MB 8-way    1
C 4 0    1024MB no_status 512MB 8-way    2
C 4 1    1024MB no_status 512MB 8-way    2
C 4 2    1024MB no_status 512MB 8-way    2
C 4 3    1024MB no_status 512MB 8-way    2
C 6 0    1024MB no_status 512MB 8-way    2
C 6 1    1024MB no_status 512MB 8-way    2
C 6 2    1024MB no_status 512MB 8-way    2
C 6 3    1024MB no_status 512MB 8-way    2

========================= IO Cards =========================
                     BusMax
IO Port Bus    Freq BusDev,
BrdTypeIDSide Slot MHzFreq Func State Name                            Model
---- ---- ---- ---- ---- ---- ---- ---- ----- ------------------------------------------------------
I/OPCI 9 B 6 33 332,0ok scsi-pci1000,30.1000.10c0.8/disk+ LSI,1030
I/OPCI 9 B 6 33 332,1ok scsi-pci1000,30.1000.10c0.8/disk+ LSI,1030
I/OPCI 9 B 5 33 333,0ok pci-pci8086,b154.0/network (netw+ PCI-BRIDGE
I/OPCI 9 B 5 33 330,0ok network-pci100b,35.30          SUNW,pci-ce/pci-bridge
I/OPCI 9 B 5 33 331,0ok network-pci100b,35.30          SUNW,pci-ce/pci-bridge
I/OPCI 9 B 5 33 332,0ok scsi-pci1000,b.7/disk (block) device on pci-bridge
I/OPCI 9 B 5 33 332,1ok scsi-pci1000,b.7/disk (block) device on pci-bridge
I/OPCI 9 B 4 33 334,0ok pci-pci8086,b154.0/network (netw+ PCI-BRIDGE
I/OPCI 9 B 4 33 330,0ok network-pci100b,35.30          SUNW,pci-ce/pci-bridge
I/OPCI 9 B 4 33 331,0ok network-pci100b,35.30          SUNW,pci-ce/pci-bridge
I/OPCI 9 B 4 33 332,0ok scsi-pci1000,b.7/disk (block) device on pci-bridge
I/OPCI 9 B 4 33 332,1ok scsi-pci1000,b.7/disk (block) device on pci-bridge
I/OPCI 9 A 8 66 661,0ok SUNW,qlc-pci1077,140.1077.140.2/+ QLA2460
I/OPCI 9 A 7 66 662,0ok SUNW,qlc-pci1077,140.1077.140.2/+ QLA2460

No failures found in System
===========================

wenyy_unix 发表于 2012-05-15 12:51

补充messages最后几条日志，请帮忙分析一下出问题的可能性，谢谢。

May 12 15:51:13 osssvr-1 pseudo: pseudo-device: rsm0
May 12 15:51:13 osssvr-1 genunix: rsm0 is /pseudo/rsm@0
May 12 15:51:14 osssvr-1 scsi: st28 at mpt0: target 5 lun 0
May 12 15:51:14 osssvr-1 genunix: st28 is /pci@9,700000/scsi@2/st@5,0
May 12 15:51:14 osssvr-1 scsi: /pci@9,700000/scsi@2/st@5,0 (st28):
May 12 15:51:14 osssvr-1 <HP DAT-72>
May 12 16:32:17 osssvr-1 explorer: Explorer interrupted
May 12 16:41:53 osssvr-1 explorer: Explorer started
May 12 16:48:40 osssvr-1 explorer: Explorer interrupted
May 12 17:52:46 osssvr-1 fmd: SUNW-MSG-ID: SUN4U-8000-2S, TYPE: Fault, VER: 1, SEVERITY: Major
May 12 17:52:46 osssvr-1 EVENT-TIME: Sat May 12 17:52:46 CST 2012
May 12 17:52:46 osssvr-1 PLATFORM: SUNW,Sun-Fire-V890, CSN: -, HOSTNAME: osssvr-1
May 12 17:52:46 osssvr-1 SOURCE: cpumem-diagnosis, REV: 1.6
May 12 17:52:46 osssvr-1 EVENT-ID: 1624a1e7-c168-4354-a514-fcb044a8f637
May 12 17:52:46 osssvr-1 DESC: The number of errors associated with this memory module has exceeded acceptable levels.Refer to http://sun.com/msg/SUN4U-8000-2S for more information.
May 12 17:52:46 osssvr-1 AUTO-RESPONSE: Pages of memory associated with this memory module are being removed from service as errors are reported.
May 12 17:52:46 osssvr-1 IMPACT: Total system memory capacity will be reduced as pages are retired.
May 12 17:52:46 osssvr-1 REC-ACTION: Schedule a repair procedure to replace the affected memory module. Use fmdump -v -u <EVENT_ID> to identify the module.
May 12 18:31:08 osssvr-1 explorer: Explorer started

wenyy_unix 发表于 2012-05-15 12:52

再补：
--------------- -------------------------------------------------- ---------
TIME          EVENT-ID                            MSG-ID       SEVERITY
--------------- -------------------------------------------------- ---------
May 12 17:52:46 1624a1e7-c168-4354-a514-fcb044a8f637SUN4U-8000-2SMajor

Fault class : fault.memory.dimm 95%
Affects : mem:///unum=Slot,B:J8000
               faulted but still in service
FRU       : mem:///unum=Slot,B:J8000 95%

hhstorm 发表于 2012-05-15 13:09

B板J8000内存需更换

D板整个重新插拔一次
:-L头一回见整块板内存看不到......
开机最大化自检,还是看不到内存的话,估计得换CPU板了

wenyy_unix 发表于 2012-05-15 13:54

谢谢楼上兄弟

znnnz 发表于 2012-05-17 12:26

Slot,B:J8000换掉这一组吧。

这个我遇到过，一根内存导致整个问题。

wenyy_unix 发表于 2012-05-31 17:19

换了Slot,B:J8000 这一根内存就都好了。

页: [1]

Chinaunix's Archiver

V890有一块CPU板上的内存认不到！