cisco 9124 和IBM 刀片上配置的cisco模块怎么配置trucking 急
现场客户有一筐刀片，并配置了CISCO 的光线模块，并同时通过此光纤模块和一台CISCO 9124 接进行连接。不知哪位大侠配置过类似的问题。连接图：cisco9124 上工配置fc1/1,fc1/2,fc1/4 其中FC1/1 需要和ibm刀片的光纤模块EXT 0进行连接。fc1/2,fc1/4分别和存储上的两个端口连接。
ibm刀片的CISCO 光纤模块 EXT 0 和bay1之间是内部连接（即IBM的刀片上都配置了hba子卡
自己配置了好久，通过交换机后，存储上不能发现刀片的hba卡，如果不通过ciscl9124，存储可以发现刀片的HBA卡。
希望哪位大侠能够帮忙查看一下，谢谢：
以下是双方的配置文件
这个是IBM 刀片上CISCO 的配置
switch# show running-config
!Command: show running-config
!Time: Fri Jun1 03:38:01 2012
version 5.0(1a)
feature telnet
role name default-role
description This is a system defined role and applies to all users.
rule 5 permit show feature environment
rule 4 permit show feature hardware
rule 3 permit show feature module
rule 2 permit show feature snmp
rule 1 permit show feature system
username admin password 5 !role network-admin
username USERID password 5 $1$VFgfQ9iU$Xx9FbiTVNCiNyo0M4wGdI/role network-admin
ip domain-lookup
ip host 192.168.70.129 192.168.70.129
aaa group server radius radius
snmp-server user USERID network-admin auth md5 0x5d4ce0ebdea074dd9735fe72193209aa priv 0x5d4ce0ebdea074dd9735fe72193209aa localizedk
ey
snmp-server community public group network-admin
fcdomain domain 99 preferred vsan 1
fcdomain fcid database
vsan 1 wwn 21:00:00:24:ff:2b:92:e8 fcid 0x630000 dynamic
ip default-gateway
line console
boot kickstart bootflash:/m9100-s2ek9-kickstart-mz.5.0.1a.bin
boot system bootflash:/m9100-s2ek9-mz.5.0.1a.bin
interface ext0
interface ext15
interface ext16
interface ext17
interface ext18
interface ext19
interface bay1
interface bay2
interface bay3
interface bay4
interface bay5
interface bay6
interface bay7
interface bay8
interface bay9
interface bay10
interface bay11
interface bay12
interface bay13
interface bay14
!Full Zone Database Section for vsan 1
zone name zone-ba1-ext0 vsan 1
member interface ext0 swwn 20:00:54:7f:ee:31:bd:80
member interface bay1 swwn 20:00:54:7f:ee:31:bd:80
zoneset name gdcdmd vsan 1
member zone-ba1-ext0
zoneset activate name gdcdmd vsan 1
interface mgmt0
ip address 192.168.70.129 255.255.255.0
switchport speed 100
interface bay1
port-license acquire
no shutdown
interface bay2
interface bay3
interface bay4
interface bay5
interface bay6
interface bay7
interface bay8
interface bay9
interface bay10
interface bay11
interface bay12
interface bay13
interface bay14
interface ext0
port-license acquire
no shutdown
interface ext15
port-license acquire
interface ext16
port-license acquire
interface ext17
port-license acquire
interface ext18
port-license acquire
interface ext19
port-license acquire
switch# show interface ext 0
ext0 is trunking
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:12:54:7f:ee:31:bd:80
Peer port WWN is 20:01:54:7f:ee:22:38:80
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port mode is TE
Port vsan is 1
Speed is 4 Gbps
Rate mode is dedicated
Transmit B2B Credit is 16
Receive B2B Credit is 16
B2B State Change Number is 14
Receive data field Size is 2112
Beacon is turned off
Trunk vsans (admin allowed and active) (1)
Trunk vsans (up) (1)
Trunk vsans (isolated) ()
Trunk vsans (initializing) ()
5 minutes input rate 216 bits/sec, 27 bytes/sec, 0 frames/sec
5 minutes output rate 152 bits/sec, 19 bytes/sec, 0 frames/sec
317 frames input, 26224 bytes
0 discards, 0 errors
0 CRC,0 unknown class
0 too long, 0 too short
319 frames output, 26012 bytes
0 discards, 0 errors
0 input OLS, 1 LRR, 0 NOS, 3 loop inits
1 output OLS, 1 LRR, 0 NOS, 1 loop inits
16 receive B2B credit remaining
16 transmit B2B credit remaining
15 low priority transmit B2B credit remaining
Interface last changed at Fri Jun1 03:32:47 2012
switch# show interface breif
^
Invalid command (interface name) at '^' marker.
switch# show interface b
bay bbcredit brief
switch# show interface brief
-------------------------------------------------------------------------------
InterfaceVsan AdminAdmin Status SFP OperOper Port
Mode Trunk ModeSpeedChannel
Mode (Gbps)
-------------------------------------------------------------------------------
bay1 1 auto on up -- F 4 --
bay2 1 auto on down -- -- --
bay3 1 auto on down -- -- --
bay4 1 auto on down -- -- --
bay5 1 auto on down -- -- --
bay6 1 auto on down -- -- --
bay7 1 auto on down -- -- --
bay8 1 auto on down -- -- --
bay9 1 auto on down -- -- --
bay10 1 auto on down -- -- --
bay11 1 auto on down -- -- --
bay12 1 auto on down -- -- --
bay13 1 auto on down -- -- --
bay14 1 auto on down -- -- --
-------------------------------------------------------------------------------
InterfaceVsan AdminAdmin Status SFP OperOper Port
Mode Trunk ModeSpeedChannel
Mode (Gbps)
-------------------------------------------------------------------------------
ext0 1 auto on trunking swl TE 4 --
ext15 1 auto on down swl -- --
ext16 1 auto on down swl -- --
ext17 1 auto on sfpAbsent -- -- --
ext18 1 auto on sfpAbsent -- -- --
ext19 1 auto on sfpAbsent -- -- --
-------------------------------------------------------------------------------
Interface Status Speed
(Gbps)
-------------------------------------------------------------------------------
sup-fc0 up 1
-------------------------------------------------------------------------------
Interface Status IP Address Speed MTU
-------------------------------------------------------------------------------
mgmt0 up 192.168.70.129/24100 Mbps 1500
以下是CISCO9124上的配置：
!Command: show running-config
!Time: Fri Jun1 03:56:58 2012
version 5.0(1a)
role name default-role
description This is a system defined role and applies to all users.
rule 5 permit show feature environment
rule 4 permit show feature hardware
rule 3 permit show feature module
rule 2 permit show feature snmp
rule 1 permit show feature system
username admin password 5 $1$8AP7h4FJ$55kALVRD4WcmBuNO5AdVQ.role network-admin
ip domain-lookup
ip host 192.168.1.100 192.168.1.100
aaa group server radius radius
snmp-server user admin network-admin auth md5 0x7f1a16c9e69eed37ca2abe68915665eb
priv 0x7f1a16c9e69eed37ca2abe68915665eb localizedkey
fcdomain domain 100 preferred vsan 1
fcdomain fcid database
vsan 1 wwn 50:00:00:e0:d0:e2:d6:06 fcid 0x640000 dynamic
vsan 1 wwn 50:00:00:e0:d0:e2:d6:86 fcid 0x640100 dynamic
vsan 1 wwn 10:00:54:7f:ee:22:38:81 fcid 0x640200 dynamic
interface vsan1
no shutdown
line console
boot kickstart bootflash:/m9100-s2ek9-kickstart-mz.5.0.1a.bin
boot system bootflash:/m9100-s2ek9-mz.5.0.1a.bin
interface fc1/1
interface fc1/2
interface fc1/3
interface fc1/4
interface fc1/5
interface fc1/6
interface fc1/7
interface fc1/8
interface fc1/9
interface fc1/10
interface fc1/11
interface fc1/12
interface fc1/13
interface fc1/14
interface fc1/15
interface fc1/16
interface fc1/17
interface fc1/18
interface fc1/19
interface fc1/20
interface fc1/21
interface fc1/22
interface fc1/23
interface fc1/24
!Full Zone Database Section for vsan 1
zone name zone12 vsan 1
member interface fc1/1 swwn 20:00:54:7f:ee:22:38:80
member interface fc1/2 swwn 20:00:54:7f:ee:22:38:80
zone name zone14 vsan 1
member interface fc1/1 swwn 20:00:54:7f:ee:22:38:80
member interface fc1/4 swwn 20:00:54:7f:ee:22:38:80
zoneset name gdcdmd vsan 1
member zone12
member zone14
zoneset activate name gdcdmd vsan 1
interface fc1/1
port-license acquire
no shutdown
interface fc1/2
port-license acquire
no shutdown
interface fc1/3
port-license acquire
no shutdown
interface fc1/4
port-license acquire
no shutdown
interface fc1/5
port-license acquire
no shutdown
interface fc1/6
port-license acquire
no shutdown
interface fc1/7
port-license acquire
no shutdown
interface fc1/8
port-license acquire
no shutdown
interface fc1/9
interface fc1/10
interface fc1/11
interface fc1/12
interface fc1/13
interface fc1/14
interface fc1/15
interface fc1/16
interface fc1/17
interface fc1/18
interface fc1/19
interface fc1/20
interface fc1/21
interface fc1/22
interface fc1/23
interface fc1/24
interface mgmt0
ip address 192.168.1.100 255.255.255.0
switchport speed 100
switch(config-if)# exit
switch(config)# show interface fc1/1
fc1/1 is trunking
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:01:54:7f:ee:22:38:80
Peer port WWN is 20:12:54:7f:ee:31:bd:80
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port mode is TE
Port vsan is 1
Speed is 4 Gbps
Rate mode is dedicated
Transmit B2B Credit is 16
Receive B2B Credit is 16
B2B State Change Number is 14
Receive data field Size is 2112
Beacon is turned off
Trunk vsans (admin allowed and active) (1)
Trunk vsans (up) (1)
Trunk vsans (isolated) ()
Trunk vsans (initializing) ()
5 minutes input rate 160 bits/sec, 20 bytes/sec, 0 frames/sec
5 minutes output rate 224 bits/sec, 28 bytes/sec, 0 frames/sec
899 frames input, 65824 bytes
0 discards, 0 errors
0 CRC,0 unknown class
0 too long, 0 too short
901 frames output, 72868 bytes
0 discards, 0 errors
3 input OLS, 2 LRR, 0 NOS, 2 loop inits
2 output OLS, 2 LRR, 1 NOS, 2 loop inits
16 receive B2B credit remaining
16 transmit B2B credit remaining
15 low priority transmit B2B credit remaining
Interface last changed at Fri Jun1 03:37:52 2012
页:
[1]