zukii618 发表于 2012-06-04 17:24

现场急切啊~~V890启动问题


。。。小弟在启动SUN Fire V890时出现了以下问题：

Environmental monitor is ON
Rebooting with command: boot -r
Boot device:net File and args:
Using Onboard Transceiver - Link Up.
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82
Requesting Internet Address for 0:14:4f:ad:64:82


该过程会无尽持续下去，在2天前我启动过该机器，没有任何问题，随即我将它关闭。今天现场再起动出现上述问题了
请各位大神帮忙。。。

znnnz 发表于 2012-06-04 17:29

boot   disk   -r

KYOKOF 发表于 2012-06-04 17:40

网络启动了，probe-scsi-all找硬盘地址 从硬盘启动

zukii618 发表于 2012-06-04 19:01

好的，我明天去试试，有人或我说EPROM有问题，我心慌额。被人从机房赶出来了:'(

东方蜘蛛 发表于 2012-06-04 23:04

在ok下看看probe-scsi-all，printenv boot-device，怀疑你的系统盘挂了:-L

DC_楚楚 发表于 2012-06-08 20:56

printenv boot-device查看一下引导项有没有 disk

DC_楚楚 发表于 2012-06-08 20:58

printenv boot-device 查看引导项有没有disk
页: [1]
查看完整版本: 现场急切啊~~V890启动问题