求助：rx7620 故障
高手帮忙看看这是什么意思一通电就报错 所有硬件都没问题MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >
Log Entry 3477: 06/29/2012 04:35:02
Alert level 3:Warning
Keyword:ERM
The Error Response Mode has been determined
Reporting Entity:System Firmware located in cabinet 0, slot 1, cpu 0
Text Message:"CONTINUE"
0x698001ee10e00d1e 0x45554e49544e4f43
0x6b0001ee10e00d1f 0x010000004fed3076
Log Entry 3476: 06/29/2012 04:35:02
Alert level 5:Critical
Keyword:PD_ERROR_REACHABLE_SET
The cell is not able to reach all requested cells through the fabric.
Reporting Entity:System Firmware located in cabinet 0, slot 1, cpu 0
Actual Data:0x0000000000000002
0xa380020310e00d1c 0x0000000000000002
0xab00020310e00d1d 0x010000004fed3076
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >
Log Entry 3475: 06/29/2012 04:35:02
Alert level 7:Fatal
Keyword:XIN_LINK_INIT_FAILED
The CC - XBC link failed to initialize.
Reporting Entity:System Firmware located in cabinet 0, slot 1, cpu 0
Actual Data:0x0000000000000002
0xe38002ff10e00d1a 0x0000000000000002
0xeb0002ff10e00d1b 0x010000004fed3076
求帮忙解决一下 不胜感激 CC至XBC的链路没法初始化，cell1报出来的。有Downtime的时候重新插拔一下cell1和所有接到系统底板的接线看看，还不行可能就要换cell1或system backplane了。至于不动的话会有什么影响，问问HP吧。
The CC - XBC link failed to initialize. 先谢了 我看看 不行的话就换
页:
[1]