IBM DS8100忘记了进后台管理的用户名密码怎么办
公司的IBM DS8100存储一直都没有人用，最近想把它装起来，启起来后想进入控制台去修改raid和lun是发现用户名和密码不对，试了很多次都登不上去，有没有什么办法可以恢复出厂设置啊或者从哪找回来呢？另外哪位兄弟有配置DS8000系列存储的发点技术资料来参考参考！ 哪家公司这么有米，买了DS8K积灰 redbooks 800 呵呵呵:lol 就说浪费啊，所以想用起来，但公司却没人会搞这个，领导逮着我去弄:'( redbooks 800 :lol 查了下IBM的红皮书，发现确实有办法，虽然还没试验，先发上来参考下，等试验成功了再把步骤贴上来！Chapter 8. Unlocking an administrative password
There might be times when administrative users forget the password that they use to access the DS Storage Manager. Beyond the set number of allowable attempts with the wrong password, the account is locked. If the administrative account is locked, the administrator must use the security recovery utility tool to reset the password to the default (administrative). You cannot unlock an administrative password using the DS Command-Line Interface. The administrative user is forced to establish a new password. Using the chuser command, you can specify a password that expires after the initial use, and then create a new password. See DS CLI documentation for more information.
Notes:
1. This security recovery utility tool only unlocks the administrative account on the DS Storage Manager on which the tool is run.
2. This task only explains how to use the security recovery utility tool to unlock the administrative account. The topic ″Unlocking a user account″ describes how to unlock a non-administrative user account.
3. The security recovery utility tool is a script that is installed in a file directory. You run the script from the directory.
steps：
1. Press the Enter key. The script runs and the administrative account is unlocked. The password is reset to the default (admin).
2. Open the Web-based System Manager tool and enter the IP address of the HMC that you want to unlock the password for. Press Enter.
3. Enter the HMC (hardware management console) password.
4. Navigate to the Service Applications folder and select Service Focal Point.
5. Select Service Utilities from the Tasks list, and then highlight the storage facility.
6. Navigate to Selected → Get HMCs, and then highlight the HMC.
7. Navigate to Selected → Start/Stop ESSNI, and then select Reset under the Security Recovery Options.
8. Click Apply.
页:
[1]