在Sun T5220服务器上, 如何知道电压或温度传感器是否被启用?
Hi我用命令"ptrdiag -v"分别查看两台Sun T5220服务器的系统状态。在传感器部分有些奇怪，Server1有温度和电压传感器的信息，而Server2却没有类似的信息。
这是不是说明Server2的温度和电压传感器未被启用？ 在Sun T5220服务器上, 如何知道电压或温度传感器是否被启用?
注：
在Server1上运行命令"prtpicl -c voltage-sensor -v"是有输出的，但Server2却没有。不过，Server2以前运行这条命令是正常的。
Server one:
Temperature sensors:
--------------------------------------------------------------------------------
Location Sensor Status
--------------------------------------------------------------------------------
SYS/MB T_AMB ok
SYS/MB/CMP0/BR0/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR0/CH1/D0 T_AMB ok
SYS/MB/CMP0/BR1/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR1/CH1/D0 T_AMB ok
SYS/MB/CMP0/BR2/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR2/CH1/D0 T_AMB ok
SYS/MB/CMP0/BR3/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR3/CH1/D0 T_AMB ok
SYS/MB/CMP0 T_TCORE ok
SYS/MB/CMP0 T_BCORE ok
Current sensors:
--------------------------------------------------------------------------------
Location Sensor Status
--------------------------------------------------------------------------------
SYS/PS0 I_IN_MAIN ok
SYS/PS0 I_IN_LIMIT ok
SYS/PS0 I_OUT_MAIN ok
SYS/PS0 I_OUT_LIMIT ok
SYS/PS1 I_IN_MAIN ok
SYS/PS1 I_IN_LIMIT ok
SYS/PS1 I_OUT_MAIN ok
SYS/PS1 I_OUT_LIMIT ok
Voltage sensors:
--------------------------------------------------------------------------------
Location Sensor Status
--------------------------------------------------------------------------------
SYS/MB V_VMEML ok
SYS/MB V_VMEMR ok
SYS/MB V_+3V3_STBY ok
SYS/MB V_VCORE ok
SYS/MB V_+3V3_MAIN ok
SYS/MB V_VDDIO ok
SYS/MB V_+12V0_MAIN ok
SYS/MB V_VBAT ok
SYS/PS0 V_IN_MAIN ok
SYS/PS0 V_OUT_MAIN ok
SYS/PS1 V_IN_MAIN ok
SYS/PS1 V_OUT_MAIN ok
Voltage indicators:
--------------------------------------------------------------------------------
Location Indicator Condition
--------------------------------------------------------------------------------
SYS/MB VCORE_POK ok
SYS/MB VMEML_POK ok
SYS/MB VMEMR_POK ok
SYS/MB I_USB0 ok
SYS/MB I_USB1 ok
SYS/HDD0 PRSNT ok
SYS/HDD1 PRSNT ok
SYS/ALARM INPUT ok
SYS/PS0 AC_POK ok
SYS/PS0 DC_POK ok
SYS/PS0 CUR_FAULT ok
SYS/PS0 VOLT_FAULT ok
SYS/PS0 FAN_FAULT ok
SYS/PS0 TEMP_FAULT ok
SYS/PS1 AC_POK ok
SYS/PS1 DC_POK ok
SYS/PS1 CUR_FAULT ok
SYS/PS1 VOLT_FAULT ok
SYS/PS1 FAN_FAULT ok
SYS/PS1 TEMP_FAULT ok
Server two:
Temperature sensors:
--------------------------------------------------------------------------------
Location Sensor Status
--------------------------------------------------------------------------------
SYS/MB T_AMB ok
页:
[1]