【求助】两块HBA卡，luxadm只找到一块
本帖最后由 linton 于 2012-09-24 07:44 编辑SUN V490,Solaris 9，安装了两块QLogic 的 QLA2310 HBA卡（PCI 1 和PCI 3槽）,用luxadm -e port 显示只找到一个：# luxadm -e port
Found path to 1 HBA ports
/devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED#
两个卡的信号灯都正常。
scli 显示有两块： HBA Model QLA2300/2310
1: Port 1 (HBA1 OS1): WWPN: 21-00-00-E0-8B-12-FF-19 Online
HBA Model QLA2300/2310
2: Port 1 (HBA0 OS2): WWPN: 21-00-00-E0-8B-12-FF-D7 Online
3: All HBAs
4: Return to Previous Menu
Note: 0 to return to Main Menu
Enter Selection: 3
--------------------------------------------------------------------------------
Host Name : daisy
HBA Instance : 1
OS Instance : 1
HBA Model : QLA2300/2310
HBA Description : QLA2300 /02/10/32 QCP2330/32
HBA ID : 1-QLA2300/2310
HBA Alias :
HBA Port : 1
Port Alias :
Node Name : 20-00-00-E0-8B-12-FF-19
Port Name : 21-00-00-E0-8B-12-FF-19
Port ID : 14-03-00
Serial Number : L86303
Driver Version : qla-4.18
FCode Version : N/A
Driver Firmware Version : 3.3.12 IPX
Actual Connection Mode : Point to Point
Actual Data Rate : 2 Gbps
PortType (Topology) : NPort
Target Count : 5
HBA Status : Online
Hit <ENTER> to continue:
--------------------------------------------------------------------------------
Host Name : daisy
HBA Instance : 0
OS Instance : 2
HBA Model : QLA2300/2310
HBA Description : QLA2300 /02/10/32 QCP2330/32
HBA ID : 0-QLA2300/2310
HBA Alias :
HBA Port : 1
Port Alias :
Node Name : 20-00-00-E0-8B-12-FF-D7
Port Name : 21-00-00-E0-8B-12-FF-D7
Port ID : 15-03-00
Serial Number : M34943
Driver Version : qla-4.18
FCode Version : N/A
Driver Firmware Version : 3.3.12 IPX
Actual Connection Mode : Point to Point
Actual Data Rate : 2 Gbps
PortType (Topology) : NPort
Target Count : 3
HBA Status : Online
Hit <ENTER> to continue:
--------------------------------------------------------------------------------
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000011c654b430,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>mirror
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000011c654baf0,0
2. c3t3d0 <DAHENG-ACCSTORFS8200-342S cyl 45530 alt 2 hd 255 sec 127>
/pci@8,600000/fibre-channel@2/sd@3,0
3. c3t4d0 <ACCSTOR-DS5312F-21a. cyl 52407 alt 2 hd 256 sec 128>
/pci@8,600000/fibre-channel@2/sd@4,0
4. c4t0d0 <DAHENG-ACCSTORFS8200-342S cyl 53027 alt 2 hd 255 sec 127>
/pci@8,700000/fibre-channel@3/sd@0,0
5. c4t2d0 <ACCSTOR-DS5312F-21a. cyl 44998 alt 2 hd 256 sec 128>
/pci@8,700000/fibre-channel@3/sd@2,0HBA卡驱动:pkginfo -l QLA2300
PKGINST:QLA2300
NAME:QLogic QLA2300 driver
CATEGORY:system
ARCH:sparc
VERSION:Solaris, Rev=4.18
BASEDIR:/
VENDOR:QLogic Corporation
PSTAMP:sunburst20050527105704
INSTDATE:12月 22 2005 08:28
STATUS:completely installed
FILES: 17 installed pathnames
2 directories
8 executables
3443 blocks used (approx)
另一块为什么用luxadm -e port找不到呢？ 如何确定是那个插槽上的卡没找到？ 是否该卡已坏？
光纤卡port是否有光？无光的话有可能是SFP模块坏掉了。
cfgadm -al # cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 usb-hub connected configured ok
usb0/2.1 usb-device connected configured ok
usb0/2.2 usb-storageconnected configured ok
usb0/2.3 unknown empty unconfigured ok
usb0/3 unknown empty unconfigured ok
usb0/4 unknown empty unconfigured okznnnz 发表于 2012-09-24 10:29 static/image/common/back.gif
cfgadm -al
页:
[1]