rx6600 Communication problem with BMC 那位高手帮忙解决一下。
MP MAIN MENU:CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
MP> vfp
Welcome to the Virtual Front Panel (VFP).
Use Ctrl-B to exit.
System state Activity # of logs since boot
--------------- -------- --------------------
Unknown Unknown
E indicates error since last boot
LEDs | LOCATOR | SYSTEM | INT. HEALTH | EXT. HEALTH | POWER
-------------------------------------------------------------------------------
| UNKNOWN | UNKNOWN | UNKNOWN | UNKNOWN | UNKNOWN
-----------------------------------------------------------------------------
Status| Communication problem with BMC
-----------------------------------------------------------------------------
MP:CM> pc
PC
Current System Power State: Status is not available
-> BMC Power Status query failed. You may
try to execute the command if you wish.
Power Control Menu:
C - Power Cycle
ON- Power On
OFF - Power Off
G - Graceful Shutdown
Enter menu item or to Quit: on
on
System will be powered on.
Confirm? (Y/): y
y
** Power On command failed.**
MP:CM> prompt
Unrecognized Command : Type HE for help on the available commands
MP:CM> rb
RB
Execution of this may result in loss of system events.
Do you want to reset the BMC? (Y/): y
y
-> BMC was issued a reset.
MP:CM> prompt
Unrecognized Command : Type HE for help on the available commands
MP:CM> tc
TC
-> BMC Power Status query failed. You may
try to execute the command if you wish.
Execution of this command irrecoverably halts all system processing and
I/O activity and restarts the computer system.
Type Y to confirm your intention to restart the system: (Y/) y
y
-> IPMI Command Failed
MP:CM> rs
RS
-> BMC Power Status query failed. You may
try to execute the command if you wish.
Execution of this command irrecoverably halts all system processing and
I/O activity and restarts the computer system.
Type Y to confirm your intention to restart the system: (Y/) y
y
-> IPMI Command Failed
MP:CM> reset了BMC还不好用?看看什么时候能停机,把MP卡重新插拔一下,然后加电再看看。再不行就先尝试更换MP卡看是否还有问题,最差的情况可能需要更换I/O chassis。 楼主 更换 I/O 笼子好了没?
页:
[1]