sasmgr命令输出异常
BL870c,B.11.23,4块硬盘Class IH/W PathDriver S/W State H/W Type Description
====================================================================
escsi_ctlr 00/2/1/0 sasd CLAIMED INTERFACE HPPCI/PCI-X SAS MPT Adapter
/dev/sasd0
Class IH/W Path Driver S/W State H/W Type Description
==============================================================================
disk 180/2/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP IR Volume
/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0
/dev/dsk/c4t0d0s1 /dev/rdsk/c4t0d0s1
/dev/dsk/c4t0d0s2 /dev/rdsk/c4t0d0s2
/dev/dsk/c4t0d0s3 /dev/rdsk/c4t0d0s3
disk 190/2/1/0.0.0.1.0 sdisk CLAIMED DEVICE HP IR Volume
/dev/dsk/c4t1d0 /dev/rdsk/c4t1d0
从以上信息来看,应该是做了2个逻辑盘,raid1,但是使用sasmgr查看详细信息时没有输出
# sasmgr -h get_info -D /dev/sasd0 -q raid
Driver specific and common library version mismatch. Exiting..
是不是什么补丁或者软件没装造成了? 保内的话,800问一下吧
没用过870,2660/6600的话,都是在EFI shell里面配置raid
看看这篇文章,是否有的帮助
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02072012/c02072012.pdf tangye 发表于 2012-12-05 11:36 static/image/common/back.gif
保内的话,800问一下吧
没用过870,2660/6600的话,都是在EFI shell里面配置raid
我现在是通过命令显示具体的配置信息,但是命令无法使用 先更新sasd先吧,下载链接:
https://h20392.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=SerialSCSI-00
不过需要注意一些要求的patch:
PHKL_31500 or superseded patch.
PHKL_33581 or superseded patch.
CommonIO product version B.11.23.1102 or later must be installed before installing the SerialSCSI-00 product.
参考文档:
http://h30499.www3.hp.com/t5/Integrity-Servers/SAS-driver-problem-HPUX/td-p/5022317#.UMV59oPz3zw sautil
页:
[1]