jakeban 发表于 2012-12-13 13:59

apa里文件/etc/rc.config.d/hp_apaconf详解

在apa里HP_APA_HOT_STANDBY为什么要设置为off

lbseraph 发表于 2012-12-13 14:25

本帖最后由 lbseraph 于 2012-12-13 14:26 编辑

看手册说明:
HP_APA_HOT_STANDBY
Configure a link aggregate for Hot Standby mode. This parameter is mutually exclusive with the HP_APA_LOAD_BALANCE_MODE parameter. In addition, HP_APA_HOT_STANDBY takes precedence over the HP_APA_LOAD_BALANCE_MODE parameter. The permissible values are on and off. The default is off.
APA的手册下载链接:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=10008&contentType=SupportManual&docIndexId=64255&prodTypeId=18964&prodSeriesId=4248623
页: [1]
查看完整版本: apa里文件/etc/rc.config.d/hp_apaconf详解