muwanqing_cu 发表于 2013-01-04 16:58

多谢   我去试试

muwanqing_cu 发表于 2013-01-04 17:53

回复 10# zeissoctopus


    第三步make config后 提示如下:root@freebsd:/usr/ports/graphics/libdrm # make config
===> No options to configure

zeissoctopus 发表于 2013-01-04 23:03

本帖最后由 zeissoctopus 于 2013-01-04 23:05 编辑

muwanqing_cu 发表于 2013-01-04 17:53 static/image/common/back.gif
回复 10# zeissoctopus




第2步我寫錯一字,第二步正確如下

在/etc/make.conf 加下兩行
WITH_KMS=YES
WITH_NEW_XORG=YES
然後第3步 make config 就出現 KMS 選項

muwanqing_cu 发表于 2013-01-05 11:08

本帖最后由 muwanqing_cu 于 2013-01-05 11:11 编辑

第四步#WITH_NEW_XORG=YES 注释掉make config后INTEL就出现了不然 就没有INTEL的选项   

是不是默认就直接选上了?


正在编译中.........

muwanqing_cu 发表于 2013-01-05 17:33

本帖最后由 muwanqing_cu 于 2013-01-05 17:51 编辑

startx 也起不来了   Xorg -configure后也没生成xorg.conf.new

zeissoctopus 发表于 2013-01-05 17:59

本帖最后由 zeissoctopus 于 2013-01-05 18:13 编辑

muwanqing_cu 发表于 2013-01-05 17:33 static/image/common/back.gif
startx 也起不来了   Xorg -configure后也没生成xorg.conf.new

樓主編譯完新的 Xorg 是如何安裝?

樓主請自習如何設定 Xorg

1) 版主寫的 http://bbs.chinaunix.net/thread-3751834-1-1.html 其中第 11 步
2) 官方手冊 http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html

以上都是基本功,用 FreeBSD 一定要自己學懂。

P.S. 如果搞不到,還是安裝 PC-BSD 吧

muwanqing_cu 发表于 2013-01-05 18:33

多谢 LS了   我再试试不行的话 再试试PC-BSD

zeissoctopus 发表于 2013-01-05 18:42

編譯完帶有 GEM/KMS 的新 xorg:

cd /usr/ports/X11/xorg
su root
make


編譯完帶有 GEM/KMS 後,重新安裝新的 Xorg 蓋過舊的

cd /usr/ports/X11/xorg
su root
make deinstall
make install


安裝完後,用 root 重新登入一次,然後輸入 Xorg -configure,新的 xorg.conf.new 便會在 root 的家目錄中 /root/xorg.conf.new



muwanqing_cu 发表于 2013-01-15 20:19

今天有空了 继续折腾重来一遍   看看结果:kiss:

muwanqing_cu 发表于 2013-01-16 16:55

回复 18# zeissoctopus


    分辨率还是不对

[    21.763]
X.Org X Server 1.10.6
Release Date: 2012-02-10
[    21.763] X Protocol Version 11, Revision 0
[    21.763] Build Operating System: FreeBSD 9.1-RELEASE amd64
[    21.763] Current Operating System: FreeBSD linux.com 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec4 09:23:10 UTC 2012   root@farrell.cse.buffalo
[    21.764] Build Date: 15 January 201306:22:12PM
[    21.764]
[    21.764] Current version of pixman: 0.24.2
[    21.764]    Before reporting problems, check http://wiki.x.org
      to make sure that you have the latest version.
[    21.764] Markers: (--) probed, (**) from config file, (==) default setting,
      (++) from command line, (!!) notice, (II) informational,
      (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.764] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 16 16:48:10 2013
[    21.815] (==) Using config file: "/etc/X11/xorg.conf"
[    21.839] (==) ServerLayout "X.org Configured"
[    21.839] (**) |-->Screen "Screen0" (0)
[    21.839] (**) |   |-->Monitor "Monitor0"
[    21.840] (**) |   |-->Device "Card0"
[    21.840] (**) |-->Input Device "Mouse0"
[    21.840] (**) |-->Input Device "Keyboard0"
[    21.840] (==) Automatically adding devices
[    21.840] (==) Automatically enabling devices
[    21.840] (**) FontPath set to:
      ${prefix}/share/fonts/X11/misc/,
      ${prefix}/share/fonts/X11/TTF/,
      ${prefix}/share/fonts/X11/OTF/,
      ${prefix}/share/fonts/X11/Type1/,
      ${prefix}/share/fonts/X11/100dpi/,
      ${prefix}/share/fonts/X11/75dpi/,
      ${prefix}/share/fonts/X11/misc/,
      ${prefix}/share/fonts/X11/TTF/,
      ${prefix}/share/fonts/X11/OTF/,
      ${prefix}/share/fonts/X11/Type1/,
      ${prefix}/share/fonts/X11/100dpi/,
      ${prefix}/share/fonts/X11/75dpi/
[    21.840] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[    21.840] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    21.840] (WW) Disabling Mouse0
[    21.840] (WW) Disabling Keyboard0
[    21.840] (II) Loader magic: 0x7c8240
[    21.840] (II) Module ABI versions:
[    21.840]    X.Org ANSI C Emulation: 0.4
[    21.840]    X.Org Video Driver: 10.0
[    21.841]    X.Org XInput driver : 12.2
[    21.841]    X.Org Server Extension : 5.0
[    21.841] (--) PCI:*(0:0:2:0) 8086:0be2:8086:2014 rev 9, Mem @ 0xc0100000/1048576, I/O @ 0x000020d0/8, BIOS @ 0x????????/65536
[    21.841] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    21.841] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    21.841] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    21.841] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    21.841] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    21.841] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    21.841] (II) LoadModule: "extmod"
[    21.842] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
[    21.869] (II) Module extmod: vendor="X.Org Foundation"
[    21.869]    compiled for 1.10.6, module version = 1.0.0
[    21.869]    Module class: X.Org Server Extension
[    21.869]    ABI class: X.Org Server Extension, version 5.0
[    21.869] (II) Loading extension MIT-SCREEN-SAVER
[    21.869] (II) Loading extension XFree86-VidModeExtension
[    21.869] (II) Loading extension XFree86-DGA
[    21.869] (II) Loading extension DPMS
[    21.869] (II) Loading extension XVideo
[    21.870] (II) Loading extension XVideo-MotionCompensation
[    21.870] (II) Loading extension X-Resource
[    21.870] (II) LoadModule: "record"
[    21.870] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
[    21.871] (II) Module record: vendor="X.Org Foundation"
[    21.871]    compiled for 1.10.6, module version = 1.13.0
[    21.872]    Module class: X.Org Server Extension
[    21.872]    ABI class: X.Org Server Extension, version 5.0
[    21.872] (II) Loading extension RECORD


页: 1 [2] 3
查看完整版本: 分辨率问题