阵列Battery Learning问题
阵列更换电池后,前面板的三角型黄灯未消失,其他正常,除了电池显示Battery Learning状态,电池是刚换上的,新电池,只换了一个电池,现在两个电池都显示Battery Learning状态,请问是什么回事?小弟求救,大神们Battery Next Learn Cycle
Allows you to control when the next battery learn cycle will occur.
During a learn cycle, the battery is discharged and recharged so the
controller can determine the current battery capacity. The default
learn cycle interval for StorageTek 2500 series arrays is 13 weeks.
The default learn cycle interval for Sun Storage 2500-M2 arrays,
6180, 6580, and 6780 arrays is 8 weeks.
Note: A complete learn cycle (discharge and recharge) can take
between 8-26 hours, depending on array model. During this time,
write caching is disabled for 2500 series arrays. For 2500-M2 arrays,
6180, 6580, and 6780 arrays, write caching is not disabled, and the
cache remains active during the learn cycle.
上述描述是在附件中查到的~~~~~
LZ可以放心了吧~~~ 阵列啥型号啊? 本帖最后由 爱上猫的鱼二 于 2013-01-30 10:50 编辑
SUN 6180的 把alarms贴出来 回复 4# 东方蜘蛛
就是显示的这个,电池已经重置过了,是不是因为新电池要充电,才显示的?B电池是刚换的,A电池开始显示OK,后面也变成learning了。 爱上猫的鱼二 发表于 2013-01-30 11:33 static/image/common/back.gif
回复 4# 东方蜘蛛
主页面的alarms贴出来~ LZ,听楼上的~~~主页面的alarms贴出来~ :-L这就解决了。。。。。。。前面板亮黄灯应该不会是电池充电引起的吧。。。。 正在充电?
页:
[1]