freebsd9.1 installkernel SCSI硬盘盘符问题 mountroot>
vmware8.0
freebsd9.1
安装好系统,硬盘选择LSI-SCSI
安装vmware-tools
配置系统内核时,如下的打开和关闭都试过
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
scsi驱动
device mpt # LSI-Logic MPT-Fusion
device mps # LSI-Logic MPT-Fusion 2
#make buildkernel KERNCONF=XXX
#make installkernel KERNCONF=XXX
#reboot
后
mountroot> ?
显示
ad0p2 ad0p1 ad0p0 ad0
demsg中全是ad0,ad1.
试过:
ufs:ada0p2
ufs:ada0p1
ufs:ada0p0
ufs:da0p2
ufs:da0p0
ufs:da0p1
全不能引导.使用:cd9660:cd0可以
如何才能查找scsi的硬盘盘符号?如何启动? :)):)):)):)):)):)):)) 是虚拟机？有可能用的是ide硬盘，看看ad0s1a ? scsi应该是da0，你看一下启动信息，找到硬盘了没有？ ad0.ada0,全都找到了.就是引导不了 :outu::outu::outu::outu::outu::outu::outu: mirnshi 发表于 2013-04-27 15:24 static/image/common/back.gif
是虚拟机？有可能用的是ide硬盘，看看ad0s1a ?
虚拟机中装的FreeBSD.
硬盘类型是scsi
bdhidoc 发表于 2013-04-28 11:22 static/image/common/back.gif
虚拟机中装的FreeBSD.
硬盘类型是scsi
那应该是da0,
da0: <VMware, VMware Virtual S 1.0> Fixed Direct Access SCSI-2 device
看看/dev/da0s1a
是不是你的内核有问题，不能简单地增加mpt，scsi驱动还需要诸如scbus的支持。比如：
# SCSI Controllers
device mpt # LSI-Logic MPT-Fusion
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device pass # Passthrough device (direct SCSI access)
...... 回复 9# mirnshi
这个是全开的
# ATA/SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
device ses # Enclosure Services (SES and SAF-TE)
device ctl # CAM Target Layer