T2000急难问题！求神助！已经解决！感谢5楼朋友的提示！
本帖最后由 漫行歌者 于 2013-05-20 09:18 编辑换了SC电池，加电启动就这样了，终端无法登陆，不能进入系统了，有谁懂???
sc> poweron
sc>
SC Alert: Host System has Reset
sc> console
Enter #. to return to ALOM.
Done
2013-05-15 16:12:07.999 0:0>INFO:
2013-05-15 16:12:08.006 0:0> POST Passed all devices.
2013-05-15 16:12:08.054 0:0>POST: Return to VBSC.
2013-05-15 16:12:08.065 0:0>Master set ACK for vbsc runpost command and spin...
SC Alert: Host System has Reset
SC Alert: Host system has shut down.
cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu Device: pci
Device: pci
ChassisSerialNumber A
/pci@780: Device 0 pci
/pci@780/pci@0: Device 0 Nothing there
/pci@780/pci@0: Device 1 pci
/pci@780/pci@0/pci@1: Device 0 network network
/pci@780/pci@0: Device 2 pci
/pci@780/pci@0/pci@2: Device 0 Nothing there
/pci@780/pci@0: Device 3 Nothing there
/pci@780/pci@0: Device 4 Nothing there
/pci@780/pci@0: Device 5 Nothing there
/pci@780/pci@0: Device 6 Nothing there
/pci@780/pci@0: Device 7 Nothing there
/pci@780/pci@0: Device 8 pci
/pci@780/pci@0/pci@8: Device 0 network network network network
/pci@780/pci@0: Device 9 pci
/pci@780/pci@0/pci@9: Device 0 scsi tape disk
/pci@780/pci@0: Device a Nothing there
/pci@780/pci@0: Device b Nothing there
/pci@780/pci@0: Device c Nothing there
/pci@780/pci@0: Device d Nothing there
/pci@780/pci@0: Device e Nothing there
/pci@780/pci@0: Device f Nothing there
Sun Fire T200, No Keyboard
Copyright 2008 Sun Microsystems, Inc.All rights reserved.
Boot device: disk0File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Sun-Fire-T200/ufsboot
Loading: /platform/sun4v/ufsboot
WARNING: rpcmod:svc_default_stksize is set more than once in /etc/system. "set rpcmod:svc_default_stksize = 0x8000" applied as the current setting.
SunOS Release 5.10 Version Generic_137111-06 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.All rights reserved.
Use is subject to license terms.
os-io WARNING: Last shutdown is later than time on time-of-day chip; check date.
Failed to configure IPv4 interface(s): e1000g0
Hostname: GW1
Error: All paths to 6006016051711C00A48CF6A7B88EDD11 are dead.
Error: 6006016051711C00A48CF6A7B88EDD11 is dead.
Error: All paths to 6006016051711C00967316AFB88EDD11 are dead.
Error: 6006016051711C00967316AFB88EDD11 is dead.
Jan1 09:03:38 in.mpathd: No test address configured on interface e1000g0; disabling probe-based failure detection on it
Could not stat: ../../devices/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w5006016941e0db35,1:c,raw path not loaded.
No such file or directory
Could not stat: ../../devices/pci@7c0/pci@0/pci@8/SUNW,qlc@0/fp@0,0/ssd@w5006016141e0db35,1:c,raw path not loaded.
No such file or directory
Could not stat: ../../devices/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w5006016941e0db35,0:c,raw path not loaded.
No such file or directory
Could not stat: ../../devices/pci@7c0/pci@0/pci@8/SUNW,qlc@0/fp@0,0/ssd@w5006016141e0db35,0:c,raw path not loaded.
No such file or directory
Booting as part of a cluster
NOTICE: CMM: Node GW1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node GW2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d6s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3.
WARNING: CMM: Open failed for quorum device 1 with gdevname '/dev/did/rdsk/d6s2'.
NOTICE: clcomm: Adapter e1000g3 constructed
NOTICE: clcomm: Path GW1:e1000g3 - GW2:e1000g3 being constructed
NOTICE: clcomm: Adapter e1000g2 constructed
NOTICE: clcomm: Path GW1:e1000g2 - GW2:e1000g2 being constructed
NOTICE: CMM: Node GW1: attempting to join cluster.
NOTICE: CMM: Cluster doesn't have operational quorum yet; waiting for quorum.
NOTICE: clcomm: GW1:e1000g3 - GW2:e1000g3 errors during initiation
NOTICE: clcomm: GW1:e1000g2 - GW2:e1000g2 errors during initiation
WARNING: Path GW1:e1000g3 - GW2:e1000g3 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
WARNING: Path GW1:e1000g2 - GW2:e1000g2 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
自用沙发！！！
同道速来啊！！！！！！:time: System文件中是不是改过参数？OS启动时有告警，仔细看下。后面的hba,网卡,路径丢失，集群仲裁设备找不到，不知道是不是和这个参数有关。 本帖最后由 byuq 于 2013-05-16 09:48 编辑
应该是光纤线没接，或者接错了，没找到外界存储，导致Quorum device没有找到，而sun cluster中另一节点没有启动，或者心跳线没有接，心跳线初始化错误，投票机制导致需要等待其他的投票设备加入后才能正常启动，现在状态就是等待Quorum device和其他节点的加入... 集群节点这样换电池吗？
貌似要先boot -x
然后再改时间，因为换完电池以后系统时间会变的
如果系统时间差距太多，是不是两节点通信就有问题呢？！！
lz，自己再看看，顺便把处理结果，跟进分享出来。。。 先检查另一个节点
页:
[1]