hlhl2003 发表于 2013-07-22 21:47

M5000的主板541-0478支持2.66的CPU吗？

[size=7]我查的所有资料好像都没查到这个主板支持2.66，问Oracle的销售，找的回答如下，我也没看出来，这个主板可以支持2.66G的明确信息，请大家帮我确认一下呗！关于2.66GHz的CPU，有如下描述：

2.66GHz SPARC64 VII+ Processors:



    See Processor and Software Requirements Matrix for minimum Solaris OS and XCP firmware requirements when using 2.66GHz SPARC64 VII+ processors in an M5000 server

    The SPARC64 VII+ processor expands the capacity of L2 cache memory to 11MB

    The SPARC64 VII+ processor-based CPU Modules installed in M5000 servers with enhanced motherboard (MOBO_B) are able to use the full 11MB of L2 cache

    The SPARC64 VII+ processor-based CPU Modules installed in M5000 servers without enhanced motherboard (MOBO_A) are only able to use 5.5MB of L2 cache

    Mixing of SPARC64 VII+, SPARC64 VII and SPARC64 VI processor-based CPU Modules within an M5000 server is supported

      The SPARC64 VII+ processor's 11MB of L2 cache will only be seen as 5.5MB of L2 cache if any SPARC64 VII or SPARC64 VI processor-based CPU Modules are installed in the same system with the SPARC64 VII+ processor-based CPU Modules

       All populated processors within the system must be SPARC64 VII+ to utilize the processor's 11MB of L2 cache, regardless of if the CPU Module is in uni or quad mode

    Existing M5000 servers without enhanced motherboard (MOBO_A) can be upgraded to new motherboard to support SPARC64 VII+/11MB cache by ordering the (PTO) Motherboard Upgrade Kit (SELX4001Z)

      All populated processors within the system must be SPARC64 VII+ to utilize the processor's 11MB of L2 cache, regardless of if the CPU Module is in uni or quad mode

    There are no (ATO or PTO) part numbers available for just processors, processors are only available as part of CPU Module options

    (1) COD license (SELX9RU1Z-N / SELX9RU1Z) would be needed to turn on each non-active COD processor

    A Temporary Capacity On Demand (T-COD) program is not available for M5000 servers



hlhl2003 发表于 2013-07-23 07:33

自已顶:-L:-L:-L

rf00147 发表于 2013-07-23 10:03

看下handbook就知道

119beyond 发表于 2013-07-23 11:00

SPARC64 VI: 2.15GHz Dual Core processors, SPARC V9, ECC Protected
SPARC64 VII: 2.4GHz Quad Core processors, SPARC V9, ECC Protected
SPARC64 VII: 2.53GHz Quad Core processors, SPARC V9, ECC Protected
SPARC64 VII+: 2.66GHz Quad Core processors, SPARC V9, ECC Protected

119beyond 发表于 2013-07-23 11:04

CPU Module
Option #         ManufacturingPart #         Description        
SELX1D1Z      371-4932         2 × SPARC64 VII+ 2.66GHz CPU Module        
SELX1A1Z         375-3477         2 × SPARC64 VI 2.1GHz CPU Module，L
SELX1B1Z         375-3568         2 × SPARC64 VII 2.4GHz CPU Module，L
SELX1C1Z         371-4615         2 × SPARC64 VII 2.53GHz CPU Module

byuq 发表于 2013-07-23 17:31

SELX4002Z        M5000 Motherboard Upgrade to SPARC64 VII+ 2.66GHz
                        7047351         Motherboard Cage (MOBO2/MBU_B_2) includes motherboard 7048160        n/a
                        300-2009    1.2V DC-DC Converter, DDC_A    n/a
                        300-2010    3.3V DC-DC Converter, DDC_B    n/a

从handbook来看，应该只有这个主板支持2.66的CPU，不然也不会单独是一个升级产品包了。

hlhl2003 发表于 2013-07-23 22:04

众说纷纭呀，还是没有最终的结果。

dfck001 发表于 2013-07-24 15:25

支持
刚好前不久刚刚扩过2.66G主频的CPU
升级之前把XSCF升到1113以上

dfck001 发表于 2013-07-24 15:26

看我之前发的文档就知道了

dfck001 发表于 2013-07-24 15:29

XSCF最好可以升到的1115
1115版本有clearfault功能不用跟ORACLE申请service password
页: [1]
查看完整版本: M5000的主板541-0478支持2.66的CPU吗？