Make:34 ***missing separator. Stop. 编译错误
今天从miniupnp官网上下载了一个miniupnp1.8，解压后make，出现了Make:34 ***missing separator. Stop. 网上大部分人说是没有tab符合，但是仔细查看了makefile，发现34行就是一个赋值操作，有不到tab，其他该有tab的地方也都有tab了。请各位大侠帮忙查看一下原因！多谢！Makfile如下：# $Id: Makefile,v 1.73 2013/02/06 13:11:45 nanard Exp $
# MiniUPnP project
# http://miniupnp.free.fr/ or http://miniupnp.tuxfamily.org/
# Author: Thomas Bernard
#
# Makefile for miniupnpd (MiniUPnP daemon)
#
# This Makefile should work for *BSD and SunOS/Solaris.
# On Mac OS X, use "bsdmake" to build.
# This Makefile is NOT compatible with GNU Make.
# Linux users, please use Makefile.linux :
#make -f Makefile.linux
#
# options can be passed to genconfig.sh through CONFIG_OPTIONS :
# $ CONFIG_OPTIONS="--ipv6 --igd2" make
#
CFLAGS ?= -pipe -Os
#CFLAGS = -pipe -O -g -DDEBUG
CFLAGS += -ansi
CFLAGS += -Wall
CFLAGS += -W
CFLAGS += -Wstrict-prototypes
#CFLAGS += -Wdeclaration-after-statement
#CFLAGS += -Wno-missing-field-initializers
CFLAGS += -fno-common
CC ?= gcc
RM = rm -f
MV = mv
INSTALL = install
STRIP = strip
# OSNAME and FWNAME are used for building OS or FW dependent code.
OSNAME != uname -s
ARCH != uname -m
.ifndef FWNAME
.if exists(/usr/include/net/pfvar.h)
FWNAME = pf
.else
FWNAME = ipf
.endif
.endif
# better way to find if we are using ipf or pf
.if defined(/etc/rc.subr) && defined(/etc/rc.conf)
.if $(OSNAME) == "FreeBSD"
FWNAME != . /etc/rc.subr; . /etc/rc.conf; \
if checkyesno ipfilter_enable; then \
echo "ipf"; else echo "pf"; fi
.endif
.if $(OSNAME) == "NetBSD"
FWNAME != . /etc/rc.subr; . /etc/rc.conf; \
if checkyesno ipfilter; then \
echo "ipf"; else echo "pf"; fi
.endif
.if $(OSNAME) == "DragonFly"
FWNAME != . /etc/rc.subr; . /etc/rc.conf; \
if chechyesno ipfilter; then \
echo "ipf"; else echo "pf"; fi
.endif
.endif
.if $(OSNAME) == "Darwin"
FWNAME = ipfw
.endif
# Solaris specific CFLAGS
.if $(OSNAME) == "SunOS"
CFLAGS += -DSOLARIS2=`uname -r | cut -d. -f2`
.if $(ARCH) == "amd64"
CFLAGS += -m64 -mcmodel=kernel -mno-red-zone -ffreestanding
.elif $(ARCH) == "sparc64"
CFLAGS += -m64 -mcmodel=medlow
.endif
.endif
STDOBJS = miniupnpd.o upnphttp.o upnpdescgen.o upnpsoap.o \
upnpredirect.o getifaddr.o daemonize.o upnpglobalvars.o \
options.o upnppermissions.o minissdp.o natpmp.o \
upnpevents.o upnputils.o getconnstatus.o \
upnppinhole.o
BSDOBJS = bsd/getifstats.o bsd/ifacewatcher.o bsd/getroute.o
SUNOSOBJS = solaris/getifstats.o bsd/ifacewatcher.o bsd/getroute.o
MACOBJS = mac/getifstats.o bsd/ifacewatcher.o bsd/getroute.o
PFOBJS = pf/obsdrdr.o pf/pfpinhole.o
IPFOBJS = ipf/ipfrdr.o
IPFWOBJS = ipfw/ipfwrdr.o ipfw/ipfwaux.o
MISCOBJS = upnpreplyparse.o minixml.o
ALLOBJS = $(STDOBJS) $(MISCOBJS)
.if $(OSNAME) == "SunOS"
ALLOBJS += $(SUNOSOBJS)
TESTGETIFSTATSOBJS = testgetifstats.o solaris/getifstats.o
TESTGETROUTEOBJS = testgetroute.o upnputils.o bsd/getroute.o
.elif $(OSNAME) == "Darwin"
ALLOBJS += $(MACOBJS)
TESTGETIFSTATSOBJS = testgetifstats.o mac/getifstats.o
TESTGETROUTEOBJS = testgetroute.o upnputils.o bsd/getroute.o
.else
ALLOBJS += $(BSDOBJS)
TESTGETIFSTATSOBJS = testgetifstats.o bsd/getifstats.o
TESTGETROUTEOBJS = testgetroute.o upnputils.o bsd/getroute.o
.endif
.if $(FWNAME) == "pf"
ALLOBJS += $(PFOBJS)
.elif $(FWNAME) == "ipfw"
ALLOBJS += $(IPFWOBJS)
.else
ALLOBJS += $(IPFOBJS)
.endif
TESTUPNPDESCGENOBJS = testupnpdescgen.o upnpdescgen.o
TESTUPNPPERMISSIONSOBJS = testupnppermissions.o upnppermissions.o
TESTGETIFADDROBJS = testgetifaddr.o getifaddr.o
MINIUPNPDCTLOBJS = miniupnpdctl.o
EXECUTABLES = miniupnpd testupnpdescgen testgetifstats \
testupnppermissions miniupnpdctl \
testgetifaddr testgetroute
.if $(OSNAME) == "Darwin"
LIBS =
.else
LIBS = -lkvm
.endif
.if $(OSNAME) == "SunOS"
LIBS += -lsocket -lnsl -lkstat -lresolv
.endif
# set PREFIX variable to install in the wanted place
INSTALLBINDIR = $(PREFIX)/sbin
INSTALLETCDIR = $(PREFIX)/etc
# INSTALLMANDIR = $(PREFIX)/man
INSTALLMANDIR = /usr/share/man
all: $(EXECUTABLES)
clean:
$(RM) $(STDOBJS) $(BSDOBJS) $(SUNOSOBJS) $(MACOBJS) $(EXECUTABLES) \
testupnpdescgen.o \
$(MISCOBJS) config.h testgetifstats.o testupnppermissions.o \
miniupnpdctl.o testgetifaddr.o testgetroute.o \
$(PFOBJS) $(IPFOBJS) $(IPFWOBJS)
install: miniupnpd genuuid
$(STRIP) miniupnpd
$(INSTALL) -d $(DESTDIR)$(INSTALLBINDIR)
$(INSTALL) -m 555 miniupnpd $(DESTDIR)$(INSTALLBINDIR)
$(INSTALL) -d $(DESTDIR)$(INSTALLETCDIR)
$(INSTALL) -b miniupnpd.conf $(DESTDIR)$(INSTALLETCDIR)
# TODO : install man page correctly
# $(INSTALL) -d $(INSTALLMANDIR)
# $(INSTALL) miniupnpd.8 $(INSTALLMANDIR)/cat8/miniupnpd.0
# genuuid is using the uuid cli tool available under OpenBSD 4.0 in
# the uuid-1.5.0 package
# any other cli tool returning a uuid on stdout should work.
UUID != if which uuidgen 2>&1 > /dev/null; then \
echo `uuidgen` ; \
elif which uuid 2>&1 > /dev/null; then \
echo `uuid` ; \
else echo "00000000-0000-0000-0000-000000000000"; \
fi
genuuid:
$(MV) miniupnpd.conf miniupnpd.conf.before
sed -e "s/^uuid=[-0-9a-fA-F]*/uuid=$(UUID)/" miniupnpd.conf.before > miniupnpd.conf
$(RM) miniupnpd.conf.before
depend: config.h
mkdep $(ALLOBJS:.o=.c) testupnpdescgen.c testgetifstats.c \
testupnppermissions.c miniupnpdctl.c testgetifaddr.c \
testgetroute.c
miniupnpd: config.h $(ALLOBJS)
$(CC) $(CFLAGS) -o $@ $(ALLOBJS) $(LIBS)
# BSDmake :
# $(CC) $(CFLAGS) -o $@ $> $(LIBS)
miniupnpdctl: config.h $(MINIUPNPDCTLOBJS)
$(CC) $(CFLAGS) -o $@ $(MINIUPNPDCTLOBJS)
testupnpdescgen: config.h $(TESTUPNPDESCGENOBJS)
$(CC) $(CFLAGS) -o $@ $(TESTUPNPDESCGENOBJS)
testgetifstats: config.h $(TESTGETIFSTATSOBJS)
$(CC) $(CFLAGS) -o $@ $(TESTGETIFSTATSOBJS) $(LIBS)
testgetifaddr: config.h $(TESTGETIFADDROBJS)
$(CC) $(CFLAGS) -o $@ $(TESTGETIFADDROBJS)
testupnppermissions: config.h $(TESTUPNPPERMISSIONSOBJS)
$(CC) $(CFLAGS) -o $@ $(TESTUPNPPERMISSIONSOBJS)
testgetroute: config.h $(TESTGETROUTEOBJS)
$(CC) $(CFLAGS) -o $@ $(TESTGETROUTEOBJS)
# gmake :
# $(CC) $(CFLAGS) -o $@ $^
# BSDmake :
# $(CC) $(CFLAGS) -o $@ $>
config.h: genconfig.sh VERSION
./genconfig.sh $(CONFIG_OPTIONS)
.SUFFIXES: .o .c
.c.o:
$(CC) $(CFLAGS) -c -o $@ $<
# $(CC) $(CFLAGS) -c -o $(.TARGET) $(.IMPSRC)
搞清楚了，原来是我把makefile文件给搞错了，不好意思！
页:
[1]