通过jumpstart网络安装Solaris Flash提示配置系统后无反应
本帖最后由 db_pub 于 2013-12-03 20:48 编辑使用jumpstart网络安装操作系统在客户段ok模式引导后在如下界面无反应，各位帮忙看看问题出在哪个环节，谢谢啊
{0} ok boot net:192.168.131.140 - install
Boot device: /pci@500/pci@0/pci@8/network@0:192.168.131.140File and args: - install
/pci@500/pci@0/pci@8/network@0: 100 Mbps full duplex link up
Requesting Internet Address for f0:21:28:4f:5f:4c
Requesting Internet Address for f0:21:28:4f:5f:4c
Requesting Internet Address for f0:21:28:4f:5f:4c
/pci@500/pci@0/pci@8/network@0: 100 Mbps full duplex link up
SunOS Release 5.10 Version Generic_147440-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
NOTICE: nxge0: xcvr addr:0x1d - link is up 100 Mbps full duplex
NOTICE: nxge2: xcvr addr:0x1b - link is up 100 Mbps full duplex
NOTICE: nxge3: xcvr addr:0x1a - link is up 100 Mbps full duplex
Configuring devices.
NOTICE: nxge2: xcvr addr:0x1b - link is up 100 Mbps full duplex
Using RPC Bootparams for network configuration information.
Attempting to configure interface nxge3...
NOTICE: nxge3: xcvr addr:0x1a - link is up 100 Mbps full duplex
NOTICE: nxge1: xcvr addr:0x1c - link is down
Skipped interface nxge3
Attempting to configure interface nxge2...
Skipped interface nxge2
Attempting to configure interface nxge1...
Skipped interface nxge1
Attempting to configure interface nxge0...
Configured interface nxge0
USB keyboard
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...
Completing system identification...
我贴出我服务器端的配置信息
root@Site140 # cat /etc/hosts
#
# Internet host table
#
::1 localhost
127.0.0.1 localhost
192.168.131.140Site140 loghost orc.com
192.168.131.144Site144
root@Site140 # cat /etc/ethers
f0:21:28:4f:5f:4c Site144
root@Site140 # ls -l /jumpstart/
total 160
-r--r----- 1 root root 182 Nov 29 03:02 any_machine
-r-xr-x--- 1 root root 64357 Nov 29 03:02 check
-r--r----- 1 root root 243 Nov 29 03:02 host_class
-rw-r----- 1 root root 246 Nov 29 03:03 jumpstartprofile
-r--r----- 1 root root 227 Nov 29 03:02 net924_sun4c
-rw-r--r-- 1 root root 47 Nov 29 03:02 rules
-rw-r----- 1 root root 4884 Nov 29 03:02 rules.bak
-rw-r--r-- 1 root root 73 Nov 29 03:02 rules.ok
-rw-r----- 1 root root 290 Nov 29 17:13 sysidcfg
-r--r----- 1 root root 24 Nov 29 03:02 upgrade
-r--r----- 1 root root 685 Nov 29 03:02 x86-begin
dr-xr-x--- 2 root root 512 Nov 29 03:02 x86-begin.conf
-r--r----- 1 root root 267 Nov 29 03:02 x86-class
-r--r----- 1 root root 896 Nov 29 03:02 zfsrootsimple
root@Site140 # cat /jumpstart/rules.ok
hostname Site140 - jumpstartprofile -
# version=2 checksum=3688
root@Site140 # cat /jumpstart/jumpstartprofile
install_type flash_install
partitioning explicit
archive_location nfsSite140:/opt/backup/flarbak/NetWorkSystem_20131127114743_sun4v.flar
filesys c0t0d0s1 31744 swap
filesys c0t0d0s1 30731 /
filesys c0t0d0s1 10138 /usr
root@Site140 # share
- /opt/quickRestore/Tools/Boot ro,anon=0 ""
- /jumpstart ro,anon=0 "jumpstart share directory"
- /opt/backup/flarbak ro,anon=0 ""
root@Site140 #
sysidcfg文件的内容就不贴了，存放目录为/jumpstart/
添加客户端：
#cd /jumpstart/Solaris10U10_SPARC/install/Solaris_10/Tools
#./add_install_client -c Site140:/jumpstart -s 192.168.131.140:/opt/backup/flarbak/NetWorkS127114743_sun4v.flar -p 192.168.131.140:/jumpstart/ Site144 sun4v
cleaning up preexisting install client "Site144"
removing Site144 from bootparams
removing /tftpboot/inetboot.SUN4V.quickRestore-1
removing /tftpboot
making /tftpboot
updating /etc/bootparams
copying boot file to /tftpboot/inetboot.SUN4V.quickRestore-1 本帖最后由 db_pub 于 2013-12-04 15:09 编辑
我的表达能力没有问题吧，大家给点建议或参考吧，不会就这么给沉底了吧 {0} ok boot net:192.168.131.140 - install
這個錯了, 要使用DHCP 指定IP
{0} ok boot net:dhcp - install 本帖最后由 db_pub 于 2014-04-22 17:12 编辑
回复 3# watchsat
感谢老兄回帖，这个问题已经解决了,原因是把sysidcfg文件中的配置项省略了路由
页:
[1]