kevin998 发表于 2014-02-28 21:36

T4-4开机报错，请高手出来指点，谢谢！

-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS

-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y

Serial console started.To stop, type #.
NOTICE:Initializing TOD: 2014/02/28 02:21:56
NOTICE:Loaded ASR status DB data. Ver. 3.
NOTICE:Initializing TPM with:
                        tpm_enable = false
                        tpm_activate = false
                        tpm_forceclear = false
NOTICE:TPM found: Ver 1.2, Rev 1.2, SpecLevel 2, errataRev 0, VendorId 'IFX'
NOTICE:TPM initialized successfully. Current state is: disabled
ERROR:   Degraded configuration: /SYS/PFM1 missing
NOTICE:Serial#:   000000000000002a.015ad4c07e2db19b
NOTICE:Serial#:   000000000000002a.015ad4c07e2db07b
NOTICE:Version:   003e003013030607
NOTICE:Version:   003e003013030607
NOTICE:T4 Revision: 1.3
NOTICE:T4 Revision: 1.3
NOTICE:MCU0: Memory Capacity is 32GB
NOTICE:MCU0: Memory Capacity is 32GB
NOTICE:MCU1: Memory Capacity is 32GB
NOTICE:MCU1: Memory Capacity is 32GB
NOTICE:Usable strands: ffffffffffffffff
NOTICE:System memory capacity is 128GB
NOTICE:Usable strands: ffffffffffffffff
NOTICE:Clocks: CMP: 2998 MHz DRAM: 533 MHz (6.4 Gbps) CL: 1600 MHz (9.6 Gbps)
NOTICE:Clocks: CMP: 2998 MHz DRAM: 533 MHz (6.4 Gbps) CL: 1600 MHz (9.6 Gbps)
NOTICE:Initializing TSR Hoovers
NOTICE:Initializing TSR Hoovers
NOTICE:Initializing FSR Hoovers
NOTICE:Initializing FSR Hoovers
NOTICE:Initializing LFU serdes 4
NOTICE:Initializing LFU serdes 4
NOTICE:Initializing LFU serdes 5
NOTICE:Initializing LFU serdes 5
NOTICE:Initializing MCU 0 serdes
NOTICE:Initializing MCU 0 serdes
NOTICE:Initializing MCU 1 serdes
NOTICE:Initializing MCU 1 serdes
NOTICE:Updating Config Information for Guest Manager
NOTICE:Issuing Host warm Reset
NOTICE:Enabling caches
NOTICE:Enabling caches
NOTICE:L3 Banks Enabled: ff
NOTICE:L3 Banks Enabled: ff
NOTICE:Initializing COU Regs
NOTICE:Initializing COU Regs
NOTICE:Initializing MCU 0
NOTICE:Initializing MCU 0
NOTICE:Initializing MCU 1
NOTICE:Initializing MCU 1
NOTICE:SMI Channel 0, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 0, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 0 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:SMI Channel 1, SB Mapping 1 -- ERRCNT:   0x0   LNERR:0x0
NOTICE:Initializing LFU Links
NOTICE:Initializing LFU Links
NOTICE:L3 Banks Enabled: ff
NOTICE:L3 Banks Enabled: ff
NOTICE:FPGA FESR: 2
NOTICE:FPGA FESR: 2
NOTICE:Fatal Error Source Reg: 20
NOTICE:Fatal Error Source Reg: 220
NOTICE:Writing SER to flash
NOTICE:Writing SER to flash
NOTICE:

      Fatal error reset handler finished

ERROR:   Powering down due to Fatal Error

DC_楚楚 发表于 2014-02-28 21:49

信息不全~

-> show faulty
-> show /SP/faultmgmt
-> show /SP/event/logs/list

kevin998 发表于 2014-02-28 22:45

-> show faulty
Target            | Property               | Value                           
--------------------+------------------------+---------------------------------

cwnlinux 发表于 2014-03-04 18:10

ERROR:   Degraded configuration: /SYS/PFM1 missing
页: [1]
查看完整版本: T4-4开机报错，请高手出来指点，谢谢！