li744831579 发表于 2014-05-12 16:23

现在解决了吗， 我现在也是这个问题， 配置完全是按照官网上的配置来的，但是一直不出图

nagios.log中日志的内容，我的没有perfdata.log 日志，不知道怎么回事。。
47822 Successfully launched command file worker with pid 3879
47823 wproc: SERVICE PERFDATA job 0 from worker Core Worker 3874 is a non-check helper but exited with return code 2
47824 wproc:   command: /usr/bin/perl /usr/local/pnp4nagios/libexec/process_perfdata.pl
47825 wproc:   early_timeout=0; exited_ok=1; wait_status=512; error_code=0;
47826 Worker 3874: Unknown jobtype: 10
47827 wproc: Unknown job type: 10
47828 wproc: SERVICE PERFDATA job 0 from worker Core Worker 3876 is a non-check helper but exited with return code 2
47829 wproc:   command: /usr/bin/perl /usr/local/pnp4nagios/libexec/process_perfdata.pl
47830 wproc:   early_timeout=0; exited_ok=1; wait_status=512; error_code=0;
47831 Worker 3876: Unknown jobtype: 10
47832 wproc: Unknown job type: 10
47833 wproc: SERVICE PERFDATA job 0 from worker Core Worker 3878 is a non-check helper but exited with return code 2
47834 wproc:   command: /usr/bin/perl /usr/local/pnp4nagios/libexec/process_perfdata.pl
47835 wproc:   early_timeout=0; exited_ok=1; wait_status=512; error_code=0;
47836 Worker 3878: Unknown jobtype: 10
47837 wproc: Unknown job type: 10

heisetukela 发表于 2014-05-12 16:42

同求，一直搞不明白

r2007 发表于 2014-05-13 09:23

将pnp4nagios改为bulk模式试试

heisetukela 发表于 2014-05-13 17:21

回复 13# r2007

更改为bulk模式后终于出图了，谢谢:em02:
   

fengxusong 发表于 2014-06-13 16:08

←_← pnp4还不支持nagios4.0以上版本…

houjun19830610 发表于 2015-02-10 09:50

我也有同样的问题，上面的哥们提供的方法试过了，没用。
页: 1 [2]
查看完整版本: nagios+pnp4nagios 不出图，perfdata目录是空的。