squid不能启动
squid不能正常启动，日志如下：2014/09/10 15:14:24| Starting Squid Cache version 3.3.8 for x86_64-redhat-linux-gnu...
2014/09/10 15:14:24| Process ID 18054
2014/09/10 15:14:24| Process Roles: master worker
2014/09/10 15:14:24| With 16384 file descriptors available
2014/09/10 15:14:24| Initializing IP Cache...
2014/09/10 15:14:24| DNS Socket created at [::], FD 5
2014/09/10 15:14:24| DNS Socket created at 0.0.0.0, FD 6
2014/09/10 15:14:24| Adding domain gj.com from /etc/resolv.conf
2014/09/10 15:14:24| Adding domain gj.com from /etc/resolv.conf
2014/09/10 15:14:24| Adding nameserver 8.8.8.8 from /etc/resolv.conf
2014/09/10 15:14:24| Adding nameserver 192.168.1.1 from /etc/resolv.conf
2014/09/10 15:14:24| Logfile: opening log daemon:/var/log/squid/access.log
2014/09/10 15:14:24| Logfile Daemon: opening log /var/log/squid/access.log
2014/09/10 15:14:24| Unlinkd pipe opened on FD 12
2014/09/10 15:14:24| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec
2014/09/10 15:14:24| Store logging disabled
2014/09/10 15:14:24| Swap maxSize 102400 + 102400 KB, estimated 15753 objects
2014/09/10 15:14:24| Target number of buckets: 787
2014/09/10 15:14:24| Using 8192 Store buckets
2014/09/10 15:14:24| Max Memsize: 102400 KB
2014/09/10 15:14:24| Max Swap size: 102400 KB
2014/09/10 15:14:24| Rebuilding storage in /var/spool/squid (clean log)
2014/09/10 15:14:24| Using Least Load store dir selection
2014/09/10 15:14:24| Set Current Directory to /var/spool/squid
2014/09/10 15:14:24| Loaded Icons.
2014/09/10 15:14:24| HTCP Disabled.
2014/09/10 15:14:24| Squid plugin modules loaded: 0
2014/09/10 15:14:24| Adaptation support is off.
2014/09/10 15:14:24| Accepting HTTP Socket connections at local=[::]:3128 remote=[::] FD 15 flags=9
2014/09/10 15:14:24| Done reading /var/spool/squid swaplog (0 entries)
2014/09/10 15:14:24| Store rebuilding is 0.00% complete
2014/09/10 15:14:24| Finished rebuilding storage from disk.
2014/09/10 15:14:24| 0 Entries scanned
2014/09/10 15:14:24| 0 Invalid entries.
2014/09/10 15:14:24| 0 With invalid flags.
2014/09/10 15:14:24| 0 Objects loaded.
2014/09/10 15:14:24| 0 Objects expired.
2014/09/10 15:14:24| 0 Objects cancelled.
2014/09/10 15:14:24| 0 Duplicate URLs purged.
2014/09/10 15:14:24| 0 Swapfile clashes avoided.
2014/09/10 15:14:24| Took 0.02 seconds (0.00 objects/sec).
2014/09/10 15:14:24| Beginning Validation Procedure
2014/09/10 15:14:24| Completed Validation Procedure
2014/09/10 15:14:24| Validated 0 Entries
2014/09/10 15:14:24| store_swap_size = 0.00 KB
2014/09/10 15:14:25| storeLateRelease: released 0 objects 配置如下 ：
#
# Recommended minimum configuration:
#
#基本信息
visible_hostname zhuaquserver1
cache_effective_user squid
cache_effective_group squid
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
#http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
#http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access allow all
# Squid normally listens to port 3128
http_port 3128
# Uncomment and adjust the following to add a disk cache directory.
cache_dir ufs /var/spool/squid 100 16 256
cache_mem 100 MB
cache_swap_low 90
cache_swap_high 95
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
回复 2# chenzhiquan2000
问题是客户端不能通过代理访问 ， access.log文件为空 本帖最后由 cryboy2001 于 2014-09-11 09:47 编辑
acl localnet src 192.168.0.0/16
这个一般是192.168.0.0/24
你的客户端网段是多少，按照改一下。
客户端的ie也要设置 客户端网段是192.168.1.2-192.168.1.254
回复 5# cryboy2001
squid -z
squid -k parse
看一下
改成下面一句看看
acl localnet src 192.168.1.0/24 还是一样的。
squid -z 的结果 ：
squid -k parse的结果 ：
显示已初始化过了，
防火墙开了没，客户端设好了没
重新
启动squid会出什么现象吗 谢谢楼主。已经改成apache httpd了
页:
[1]
2