问个关于2900的问题，以下输出除了FT0有错外，还能看出来哪有错吗求解
Sun Jan 04 01:53:06 soradb2 lom: Boot: ScApp 5.21.1, RTOS 48Sun Jan 04 01:53:07 soradb2 lom: SBBC Reset Reason(s): Power On Reset
Sun Jan 04 01:53:08 soradb2 lom: Initializing the SC SRAM
Sun Jan 04 01:53:15 soradb2 lom: Caching ID information
Sun Jan 04 01:53:16 soradb2 lom: Error reading rocker switch state
Sun Jan 04 01:53:17 soradb2 lom: Clock Source: 75MHz
Sun Jan 04 01:53:22 soradb2 lom: WARNING: Fru type not recognized at BP, use Baseplane
Sun Jan 04 01:53:24 soradb2 lom: /BP: Chassis.probeHpu: unit failed: sun.serengeti.HpuFailedException
Sun Jan 04 01:53:26 soradb2 lom: WARNING: Fru type not recognized at SIB, use Indicator Board
Sun Jan 04 01:53:27 soradb2 lom: i2c error while accessing Indicator board
Sun Jan 04 01:53:28 soradb2 lom: /SIB: Chassis.probeHpu: unit failed: sun.serengeti.HpuFailedException
Sun Jan 04 01:53:34 soradb2 lom: /N0/PS0: Status is OK
Sun Jan 04 01:53:40 soradb2 lom: /N0/PS1: Status is OK
Sun Jan 04 01:53:45 soradb2 lom: /N0/PS2: Status is OK
Sun Jan 04 01:53:51 soradb2 lom: /N0/PS3: Status is OK
Sun Jan 04 01:53:56 soradb2 lom: Chassis is in dual partition mode.
Sun Jan 04 01:53:58 soradb2 lom: WARNING: Fru type not recognized at FT0, use Fan Tray
Sun Jan 04 01:54:00 soradb2 lom: i2c error accessing FT0
Sun Jan 04 01:54:03 soradb2 lom: /FT0: Chassis.probeHpu: unit failed: sun.serengeti.HpuFailedException: Lw8FanHpu.probe: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for RRDY, status=0x6020c008, bus=26(/N0/BP) ring=06 addr=20
Sun Jan 04 01:54:12 soradb2 lom: SepromContainer.writeOut: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60518008, bus=26(BP) ring=06 addr=51
Sun Jan 04 01:54:12 soradb2 lom: /N0/BP: SepromContainer.writeOut: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60518008, bus=26(BP) ring=06 addr=51
Sun Jan 04 01:54:12 soradb2 lom: SepromContainer.writeOut: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60518008, bus=26(BP) ring=06 addr=51
Sun Jan 04 01:54:13 soradb2 lom: /N0/BP: SepromContainer.writeOut: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60518008, bus=26(BP) ring=06 addr=51
Sun Jan 04 01:54:15 soradb2 lom: SepromContainer.writeOut: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60518008, bus=26(BP) ring=06 addr=51
Sun Jan 04 01:54:16 soradb2 lom: /N0/BP: SepromContainer.writeOut: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60518008, bus=26(BP) ring=06 addr=51
Sun Jan 04 01:54:19 soradb2 lom: SepromContainer.writeOut: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60528008, bus=26(/N0/BP) ring=06 addr=52
Sun Jan 04 01:54:19 soradb2 lom: /N0/SIB: SepromContainer.writeOut: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60528008, bus=26(/N0/BP) ring=06 addr=52
Sun Jan 04 01:54:19 soradb2 lom: SepromContainer.writeOut: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60528008, bus=26(/N0/BP) ring=06 addr=52
Sun Jan 04 01:54:20 soradb2 lom: /N0/SIB: SepromContainer.writeOut: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60528008, bus=26(/N0/BP) ring=06 addr=52
Sun Jan 04 01:54:20 soradb2 lom: SepromContainer.writeOut: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60528008, bus=26(/N0/BP) ring=06 addr=52
Sun Jan 04 01:54:20 soradb2 lom: /N0/SIB: SepromContainer.writeOut: sun.serengeti.I2cException: I2cComm.busyWait: busyWait() timeout waiting for WRDY, status=0x60528008, bus=26(/N0/BP) ring=06 addr=52
Sun Jan 04 01:54:24 soradb2 lom: NOTICE: /N0/FT0 detected failure
Sun Jan 04 01:54:26 soradb2 lom: Fan Tray Slot 0 Device poll caused: sun.serengeti.FailedHwException: Lw8FanCsr.getRotorSpeed: I2cComm.busyWait: busyWait() timeout waiting for RRDY, status=0x6023c008, bus=26(/N0/BP) ring=06 addr=23
Sun Jan 04 01:54:26 soradb2 lom: Device will not be polled
Sun Jan 04 01:54:26 soradb2 lom: Cold boot detected: recovering active domains
Sun Jan 04 01:54:27 soradb2 lom: /N0/FT0, sensor status, fan failure (7,4)
Sun Jan 04 01:54:28 soradb2 lom: Starting telnet server ...
页:
[1]