sanyao1207 发表于 2015-05-26 15:22

M4000 pci网口不断死，不断活，啥原因啊！！！

请问各位大侠 网口不断死，不断活，出现以下消息，怎么搞
May 26 10:33:33 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is down
May 26 10:34:05 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex
May 26 10:38:58 wznpo1 ftpd: FTP LOGIN REFUSED (username in /etc/ftpd/ftpusers) FROM 192.162.117.100 , root
May 26 10:55:55 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is down
May 26 11:00:26 wznpo1 ftpd: FTP LOGIN REFUSED (username in /etc/ftpd/ftpusers) FROM wznpo1 , root
May 26 11:01:30 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex
May 26 11:02:51 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is down
May 26 11:02:57 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex
May 26 11:06:03 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is down
May 26 11:06:43 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex
May 26 11:29:38 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_drain: port0 failed rd_fifo != wr_fifo
May 26 11:29:38 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_init: Fail to Reset IPP Port #0
May 26 11:29:38 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_drain: port0 failed rd_fifo != wr_fifo
May 26 11:29:38 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_init: Fail to Reset IPP Port #0
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_disable: port0 failed rd_fifo != wr_fifo
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_disable: Fail to disable IPP Port #0
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_drain: port0 failed rd_fifo != wr_fifo
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_init: Fail to Reset IPP Port #0
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_drain: port0 failed rd_fifo != wr_fifo
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_init: Fail to Reset IPP Port #0
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_drain: port0 failed rd_fifo != wr_fifo
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_init: Fail to Reset IPP Port #0
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 :nxge_ipp_drain: port0 failed rd_fifo != wr_fifo
May 26 11:29:39 wznpo1 nxge: WARNING: nxge0 : nxge_ipp_init: Fail to Reset IPP Port #0
May 26 11:29:52 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex
May 26 11:46:07 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is down
May 26 11:46:16 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex
May 26 11:47:14 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is down
May 26 11:47:27 wznpo1 nxge: NOTICE: nxge0: xcvr addr:0x0d - link is up 1000 Mbps full duplex

ahcnpl 发表于 2015-05-26 20:47

查一下交换机那端看看交换机有没有什么报错,有条件的话换个网线试试看.

sanyao1207 发表于 2015-05-27 08:07

换了直接接笔记本电脑，用自己的网线接着服务器的pci网口，也出现这种情况。。。感觉是PCI网卡或者是PCI板卡的问题，要么是网卡坏了，要么是PCI插槽没有插紧接触不良回复 2# ahcnpl


   
页: [1]
查看完整版本: M4000 pci网口不断死，不断活，啥原因啊！！！