metareplace -e d0 c1t1d0s0
d0: Mirror
Submirror 0: d10
State: Okay
Submirror 1: d20
State: Resyncing
Resync in progress: 1 % done
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 117024000 blocks (55 GB)
命令执行完成,还是不对。
d0: Mirror
Submirror 0: d10
State: Okay
Submirror 1: d20
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 117024000 blocks (55 GB)
d10: Submirror of d0
State: Okay
Size: 117024000 blocks (55 GB)
Stripe 0:
Device Start BlockDbase State Reloc Hot Spare
c1t0d0s0 0 No Okay Yes
d20: Submirror of d0
State: Needs maintenance
Invoke: metareplace d0 c1t1d0s0 <new device>
Size: 117024000 blocks (55 GB)
Stripe 0:
Device Start BlockDbase State Reloc Hot Spare
c1t1d0s0 0 No Maintenance Yes
10几分钟能同步完? 就一个solaris 10 end system 安装。 其他软件都没有。
bash-3.00# df -k
Filesystem kbytes used avail capacityMounted on
/dev/md/dsk/d0 57625861 5933104 51116499 11% / bash-3.00# uname -a
SunOS NJATM4 5.10 Generic_139555-08 sun4u sparc SUNW,Sun-Fire-480R
bash-3.00# more /etc/release
Solaris 10 5/09 s10s_u7wos_08 SPARC
Copyright 2009 Sun Microsystems, Inc.All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
重新再安装一次 ?? solaris10的软镜像同步没这么快吧;我记得我做完后修改了/etc/system参数同步都至少要两个钟头呢,而且是新装系统,没有任何应用来着! 非常谢谢了。 后来连续更换了2个硬盘,镜像好了。 但我是重新安装了。
bash-3.00# metastat d0
d0: Mirror
Submirror 0: d10
State: Okay
Submirror 1: d20
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 135055872 blocks (64 GB)
d10: Submirror of d0
State: Okay
Size: 135055872 blocks (64 GB)
Stripe 0:
Device Start BlockDbase State Reloc Hot Spare
c1t0d0s0 0 No Okay Yes
d20: Submirror of d0
State: Okay
Size: 135055872 blocks (64 GB)
Stripe 0:
Device Start BlockDbase State Reloc Hot Spare
c1t1d0s0 0 No Okay Yes
Device Relocation Information:
Device RelocDevice ID
c1t0d0 Yes id1,ssd@n2000000c50f0cb28
c1t1d0 Yes id1,ssd@n2000000c50f0cafb 非常感谢, 更换2个备用的硬盘,重新安装后,镜像都做好了。
页:
1
[2]