关于地址重叠（S5PV210,UBOOT移植）
请问：在Makefile中修改了这语句“__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))”，修改为“__LIBS := $(subst $(obj),,$(LIBBOARD)) $(subst $(obj),,$(LIBS))”
再进行make,发生错误。
错误提示如下：
arm-linux-ld: section .bss overlaps section .rel.dyn
arm-linux-ld: u-boot: section .bss lma 0x34829f60 overlaps previous sections
make: *** Error 1
为何.rel.dyn不能与.bss段地址发生重叠？
若不修改“__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))”，刚make后不会产生错误提示。
请问这是怎么回事
页:
[1]