请教高手关于picld不正常的原因, 谢谢!
V440报一电源不正常, 检查发现最左边亮菊黄灯, 但中间和右边都是绿色, 同时发现命令prtdiag工作不正常, 报"picl_initialize failedDaemon not responding
Cannot display environmental status" 用ps -ef|grep picld发现picld已停止工作, 用/etc/init.d/picld start启动, prtdiag恢复正常, 发现电源的错误是
Supply Status Fan FailTemp FailCS Fail3.3V 5V 12V 48V
---------------------------------------------- -- --- ---
PS0 GOOD 8 4 3 6
PS1 FAIL ON OFF OFF 7 4 3 6
PS2 GOOD 8 4 3 6
但过没多久发现picld又不工作了(用ps -ef|grep picld发现picld不存在), 重新启动, 过几十秒又不工作了, 且prtdiag也无法工作. 换了新的电源, picld倒是还在, 但用prtdiag报如下错
========================= Environmental Status =========================
failed in fill_device_array_from_id for PSVC_KEYSWITCH
Property not found
failed in fill_device_array_from_id for FSP_LED
Property not found
failed in fill_device_array_from_id for DISK
Property not found
failed in fill_device_array_from_id for FAN
Property not found
Power Supplies:
---------------
Supply Status Fan FailTemp FailCS Fail3.3V 5V 12V 48V
---------------------------------------------- -- --- ---
failed in fill_device_array_from_id for PS
Property not found
========================= HW Revisions =======================================
现在系统无法检测环境状态如:风扇速度, CPU温度, 电源状态. 急! SUN建议打补丁或RESET. 请问高手有没有其他建议, 先谢了! 搞定了吗？
页:
[1]