标题: AS/400 安装故障，急，在线等 [打印本页] 作者: pumpkins 时间: 2008-03-20 15:17 标题: AS/400 安装故障，急，在线等 170的机子，系统版本用v5.2
从光盘启动，进入选择安装内码，
选安装内码+初始化系统，机器面版就报：
B6005120错误黄灯亮控试了几次都这样
进DST安装也是如此，介质没问题
大家帮帮我。作者: jackyhue 时间: 2008-03-20 18:26
System LIC detected a program exception
System LIC detected a programming problem. If performance
or other system degradation is occurring, the system may be
operating with reduced resources.
Check the Product activity log for related entries. If this
reference code is logged with a Class of Informational, then no
action is required.
LIC detected an IOP programming problem. Data must be gathered to determine
the cause of the problem. If using OptiConnect and the IOP is connected to
another system, then collect this information from both systems.
1. Is the system operational (did the SRC come from the Service Action Log,
Product Activity Log, problem log, or system operator message)?
Yes No
↓ Go to step 9 of this procedure.
2. Is this a x6xx5121 SRC?
No Yes
↓ Go to step 4 of this procedure.
3. If the IOP has DASD attached to it, then the IOP dump is in SID87 (or SID187
if the DASD is mirrored). Copy the IOP dump (see “Copying the IOP Storage
Dump to Removable Media” in the iSeries Service Functions information).
4. Print the Product Activity Log, including any IOP dumps, to removable media
for the day which the problem occurred. Select the option to obtain HEX data.
5. Use the “Licensed Internal Code log” service function under DST/SST to copy
the LIC log entries to removable media for the day that the problem occurred.
6. Copy the system configuration list (see “Hardware Service Manager, Printing
the System Configuration List” in the iSeries Service Functions information).
7. Provide the dumps to IBM Service Support.
8. Check the Logical Hardware Resource STATUS field using Hardware Service
Manager. If the status is not Operational then IPL the IOP using the I/O Debug
option (Ignore resources with a status of not connected).
To IPL a failed IOP, the following command can be used: VRYCFG CFGOBJ(XXXX)
CFGTYPE(*CTL) STATUS(*RESET) or use DST/SST Hardware Service Manager.
If the IPL does not work:
v Check the Service Action Log for new SRC entries (see “Using the Service
Action Log” on page 9). Use the new SRC and go to “Chapter 2. Unit
Reference Codes” on page 59.
v If there are no new SRCs in the Service Action Log, go to “BUS-PIP1” on
page 267.
This ends the procedure.
9. Has the system stopped but the DST console is still active (Did the SRC come
from the Main Storage Dump manager screen on the DST console)?
Yes No
↓ Go to step 15 of this procedure.
10. Complete a Problem Summary Form using the information in words 1–9 from
the control panel, or from the DST Main Storage Dump screen (see “Error
Recovery for Dumps, Reporting the Error” in the iSeries Service Functions
information).
11. The system has already taken a partial main storage dump for this SRC and
automatically re-IPLed to DST (see “Automatic Main Storage Dump” in the
iSeries Service Functions information).
12. Copy the main storage dump to tape (see “Copying a Main Storage Dump” in
the iSeries Service Functions information).
13. When the dump is completed, the system will re-IPL automatically. Sign on to
DST or SST. Obtain the data in steps 3, 4, 5, and 6 of this procedure.
14. Provide the dumps to IBM Service Support.
This ends the procedure.
15. Has the system stopped with an SRC at the control panel?
Yes No
↓ Go to step 1 of this procedure.
16. Complete a Problem Summary Form using the information in words 1–9 from
the control panel, or from the DST Main storage dump screen (see “Error
Recovery for Dumps, Reporting the Error” in the iSeries Service Functions
information).
17. IPL to DST and start the Main storage dump manager service function.
18. Copy the main storage dump to tape (see “Copying a Main Storage Dump” in
the iSeries Service Functions information).
19. Obtain the data in steps 3, 4, 5, and 6 of this procedure.
20. Re-IPL the system.
21. Has the system stopped with an SRC at the control panel?
Yes No
↓ Provide the dumps to IBM Service Support.
This ends the procedure.
22. Use the new SRC and go to “Chapter 2. Unit Reference Codes” on page 59.
This ends the procedure.