Chinaunix

标题: 那位老大指点一下Cisco Works2000的配置 [打印本页]

作者: yhd8980    时间: 2003-07-07 08:58
标题: 那位老大指点一下Cisco Works2000的配置
设置Campus Manager 3.1 登录网管系统。选择菜单“Server Configuration”-“Setup”-“ANI Server Admin”-“SNMP Settings”,对照说明将脚本中的Read及Write Community String更改为本网中使用的值。

我的路由器地址:10.129.0.98
snmp配置:

snmp-server community nms RO
snmp-server community yhd RW
snmp-server location NEIMEN
snmp-server contact person tel: 04716269449
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps bgp


那这个脚本应当啥写:
# Enter the community string using this syntax:
#       target:read_community::timeout:retries:::write_community
#
# You must be sure to keep the correct number of colons between entries.
# If you add or delete colons,  the ANI Server will NOT be able to properly read the community strings.
#
# To verify that you are entering valid community strings, use the online help for guidance.

target:read_community::::::write_community
多谢指教。





欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2