Chinaunix

标题: 博科S3900问题,请各位老大帮忙分析一下原因 [打印本页]

作者: lyjj520 时间: 2008-06-20 16:55
标题: 博科S3900问题,请各位老大帮忙分析一下原因

B3900 supportsave 20080619.rar (229.44 KB, 下载次数: 34) 我有这有一台brocad s3900出现的一些问题,就是在使用过程中发现该设备所有的端口都被disable了,在我把该设备调电重启后该设备运行正常
哪位老大能帮忙分析一下原因附件是一些信息,
b3900_1:admin> switchShow
switchName:       b3900_1
switchType:       12.4
switchState:       Faulty
switchMode:       Native
switchRole:       Faulty
switchDomain:       11 (unconfirmed)
switchId:       fffc0b
switchWwn:       10:00:00:60:69:90:80:25
zoning:             ON (SwitchTop1cfg)
switchBeacon:       OFF

Area Port Media Speed State
==============================
  0 0 id N2 In_Sync Disabled (Marked offline After Failover)
  1 1 id N2 In_Sync Disabled (Marked offline After Failover)
  2 2 id N2 In_Sync Disabled (Marked offline After Failover)
  3 3 id N2 In_Sync Disabled (Marked offline After Failover)
  4 4 id N2 No_Light  Disabled (Marked offline After Failover)
  5 5 id N2 No_Light  Disabled (Marked offline After Failover)
  6 6 id N2 No_Light  Disabled (Marked offline After Failover)
  7 7 id N2 No_Light  Disabled (Marked offline After Failover)
  8 8 id N2 No_Light  Disabled (Marked offline After Failover)
  9 9 id N2 No_Light  Disabled (Marked offline After Failover)
10  10 id N2 No_Light  Disabled (Marked offline After Failover)
11  11 id N2 No_Light  Disabled (Marked offline After Failover)
12  12 id N2 No_Light  Disabled (Marked offline After Failover)
13  13 id N2 No_Light  Disabled (Marked offline After Failover)
14  14 id N2 No_Light  Disabled (Marked offline After Failover)
15  15 id N2 No_Light  Disabled (Marked offline After Failover)
16  16 id N2 In_Sync Disabled (Marked offline After Failover)
17  17 id N2 In_Sync Disabled (Marked offline After Failover)
18  18 id N2 No_Light  Disabled (Marked offline After Failover)
19  19 id N2 In_Sync Disabled (Marked offline After Failover)
20  20 id N2 No_Light  Disabled (Marked offline After Failover)
21  21 id N2 No_Light  Disabled (Marked offline After Failover)
22  22 id N2 No_Light  Disabled (Marked offline After Failover)
23  23 id N2 No_Light  Disabled (Marked offline After Failover)
24  24 id N2 No_Light  Disabled (Marked offline After Failover)
25  25 id N2 No_Light  Disabled (Marked offline After Failover)
26  26 id N2 No_Light  Disabled (Marked offline After Failover)
27  27 id N2 No_Light  Disabled (Marked offline After Failover)
28  28 id N2 No_Light  Disabled (Marked offline After Failover)
29  29 id N2 No_Light  Disabled (Marked offline After Failover)
30  30 id N2 No_Light  Disabled (Marked offline After Failover)
31  31 id N2 No_Light  Disabled (Marked offline After Failover)

作者: maqizhi 时间: 2008-06-21 20:53
标题: 回复 #1 lyjj520 的帖子
firmware版本是多少？最好升级一下，问题应该就会解决。

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)