Chinaunix

标题: 操作系统升级失败 [打印本页]

作者: wumin214xf    时间: 2008-07-16 16:26
标题: 操作系统升级失败
570的机器,oslevel  5300-05-06 升级到5300-08-02-0822失败
installp:  APPLYING software for:
        bos.rte.install 5.3.0.61

restore: 0511-126 Cannot open /jingyou/fix/bos.rte.install.5.3.0.61.bff: A file or directory in the path name does not exist.
Mount volume 1 on /jingyou/fix/bos.rte.install.5.3.0.61.bff.
        Press the Enter key to continue.
0503-405 installp:  An error occurred while running the restore command.
        Use local problem reporting procedures.

installp:  CANCELLED software for:
        bos.rte.install 5.3.0.61
作者: chalylau    时间: 2008-07-16 17:08
restore: 0511-126 Cannot open /jingyou/fix/bos.rte.install.5.3.0.61.bff: A file or directory in the path name does not exist.

路径不正确
作者: wumin214xf    时间: 2008-07-16 18:14
不会吧.
我的升级包都放在/jingyou/fix/目录下.
但是,/jingyou/fix/目录下并没有bos.rte.install.5.3.0.61.bff文件.
作者: wumin214xf    时间: 2008-07-16 18:23
标题: 回复 #1 wumin214xf 的帖子
下面是我的smit.log文件.
请大家帮我看看.升级是今天中午12点多做的 smit.rar (25.5 KB, 下载次数: 44)
作者: jaix    时间: 2008-07-16 18:54
bos.rte.install.5.3.0.61.bff
this fix is missing.

make sure your fixes are been downloaded completely
作者: wumin214xf    时间: 2008-07-16 19:59
包应该没有什么问题,我本来是想打IY91677的包的但是打不上.
instfix: There are no filesets on the media for IY91677.
instfix: There are no filesets on the media for the requested Fix IDs.

后面就想升级操作系统了,但是也升级不了.郁闷.

我师傅说他的操作系统有一点混乱,oslevel 5300-05-06
但是从smit.log里可以看到包基本上都是5300-06的
bos.cifs_fs.rte             5.3.0.61        USR         APPLY       CANCELLED  
bos.alt_disk_install.rte    5.3.0.60        USR         APPLY       CANCELLED  
bos.alt_disk_install.boot_i 5.3.0.60        USR         APPLY       CANCELLED  
bos.aixpert.websm           5.3.0.60        USR         APPLY       CANCELLED  
bos.aixpert.cmds            5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.utils               5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.syscalls            5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.sccs                5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.prof                5.3.0.61        USR         APPLY       CANCELLED  
bos.adt.libmio              5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.libm                5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.lib                 5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.include             5.3.0.61        USR         APPLY       CANCELLED  
bos.adt.graphics            5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.debug               5.3.0.60        USR         APPLY       CANCELLED  
bos.adt.base                5.3.0.61        USR         APPLY       CANCELLED  
bos.acct                    5.3.0.60        USR         APPLY       CANCELLED  
bos.64bit                   5.3.0.61  
现在无从下手
作者: wumin214xf    时间: 2008-07-16 20:44
bos.rte.install.5.3.0.61.bff
this fix is missing.

make sure your fixes are been downloaded completely

如果我从别的目录copy一个bos.rte.install.5.3.0.61.bff文件过来行吗?
作者: jaix    时间: 2008-07-16 20:57
you can try it.
作者: jaix    时间: 2008-07-16 21:02
you'd better download the whole 5300-08-02-0822 fileset which contains the Technology Level 5300-08-00-0818  from IBM web page.
作者: wumin214xf    时间: 2008-07-16 21:08
you'd better download the whole 5300-08-02-0822 fileset which contains the Technology Level 5300-08-00-0818  from IBM web page.

我是这样做的.
作者: jaix    时间: 2008-07-16 21:11
If your 5300-08-02-0822  is noly service pack which without include Technology Level 5300-08  ,
the system updation will be failure,
as your system is only 5300-05-06 .
作者: wumin214xf    时间: 2008-07-17 08:54
客户好像原来打过一次补丁,后面又安装了一些包又降下来了.
而且里面有很多包是apply状态的,
想问下在#smit update_all之前要把apply状态的包commit吗?
作者: meilixueshan    时间: 2008-07-17 08:58
commit
作者: wumin214xf    时间: 2008-07-17 23:05
我想先安装下bos.rte.install包.
不知道上网上下载bos.rte.install.5.3.0.61.bff包能不能直接升级?
我现在这个包的状态是 bos.rte.install           5.3.0.56    A     F    LPP Install Commands

[ 本帖最后由 wumin214xf 于 2008-7-17 23:06 编辑 ]
作者: cinord    时间: 2008-07-18 11:59
你下载的补丁包多大,应该至少1.8G以上!
作者: diyxyj    时间: 2008-07-18 12:35
检查包是否下在正确和完整;
把.toc文件干掉,重新inutoc . ;
smitty update_all;
另外注意 如你这个情况 我的建议是 先升级到TL8, 然后再升级到TL8-SP2。 我这里做了n台 没有遇到你说的这种问题。




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2