1>查看IOS及设备是否支持SDM管理
http://www.cisco.com/univercd/cc/td/doc/product/software/sdm/sdmi21.htm#wp56359
Table 1 SDM-Supported Routers and Cisco IOS Versions
SDM-Supported Routers
SDM-Supported Cisco IOS Versions
Cisco 831 and 837
•
12.2(13)ZH or later
•
12.3(2)XA or later
•
12.3(2)T or later
Cisco 836
•
12.2(13)ZH or later
•
12.3(2)XA or later
•
12.3(4)T or later
Cisco 1701
•
12.2(13)ZH or later
•
12.3(2)XA or later (SDM does not support Cisco IOS release 12.3(2)XF)
•
12.3(4)T or later
Cisco 1711 and 1712
•
12.2(15)ZL or later
•
12.3(2)XA or later (SDM does not support Cisco IOS release 12.3(2)XF)
Cisco 1710, 1721, 1751, 1751-v, 1760, and 1760-v
•
12.2(13)ZH or later
•
12.3(2)XA or later (SDM does not support Cisco IOS release 12.3(2)XF)
•
12.2(13)T3 or later
•
12.3(2)T or later
•
12.3(1)M or later
•
12.2(15)ZJ3 (not available for the 1710 or 1721)
Cisco 1841
•
12.3(8)T4 or later
Cisco 2610XM, 2611XM, 2620XM, 2621XM, 2650XM, 2651XM, and 2691
•
12.2(11)T6 or later
•
12.3(2)T or later
•
12.3(1)M or later
•
12.3(4)XD
•
12.2(15)ZJ3
Cisco 2801, 2811, 2821 and ,2851
•
12.3(8)T4 or later
Cisco 3640, 3661, and 3662
•
12.2(11)T6 or later
•
12.3(2)T or later
•
12.3(1)M or later
•
12.3(4)XD
•
12.2(15)ZJ3
Cisco 3620
•
12.2(11)T6 or later
•
12.3(1)M or later
Cisco 3640A
•
12.2(13)T3 or later
•
12.3(2)T or later
•
12.3(1)M or later
•
12.3(4)XD
•
12.2(15)ZJ3
Cisco 3725 and 3745
•
12.2(11)T6 or later
•
12.3(2)T or later
•
12.3(1)M or later
•
12.3(4)XD
•
12.2(15)ZJ3
Cisco 3825 and 3845
•
12.3(11)T or later
Cisco 7204VXR and 7206VXR
•
12.3(2)T or later
•
12.3(1)M or later
SDM does not support B, E, or S train releases on the Cisco 7000 routers.
Cisco 7301
•
12.3(2)T or later
•
12.3(3)M or later
SDM does not support B, E, or S train releases on the Cisco 7000 routers.
2>IOS配置
Router# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# ip http server
Router(config)# ip http secure-server
Router(config)# ip http authentication local
Router(config)# ip http timeout-policy idle 600 life 86400 requests 10000
Router(config)# username sense privilege 15 secret cisco
Router(config)# line vty 0 4
Router(config-line)# privilege level 15
Router(config-line)# login local
Router(config-line)# transport input telnet ssh
Router(config-line)# exit
Router(config)# logging buffered 51200 warning
Router(config)# int f0/1
Router(config-if)# ip add 192.168.1.1 255.255.255.0
Router(config-if)# no shut
