Chinaunix

标题: 帮忙看看，显黄灯，用diag也去除不了。该如何处理，急！！！ [打印本页]

作者: panhaizhou 时间: 2008-10-14 09:05
标题: 帮忙看看，显黄灯，用diag也去除不了。该如何处理，急！！！
# errpt -aj 812AD93D
---------------------------------------------------------------------------
LABEL:       SISIOA_BAT_T
IDENTIFIER:    812AD93D

Date/Time:    Fri Oct 10 05:34:07 BEIST 2008
Sequence Number: 227
Machine Id:    000108B0D700
Node Id:       CTMESP1
Class:          H
Type:          TEMP
Resource Name: sisraid0
Resource Class:  driver
Resource Type: sisraid
Location:       U787F.001.DPM0DL2-P1-C8-T1
VPD:
      Product Specific.(  ).......PCI-X Dual Channel Ultra320 SCSI RAID
                                 Adapter
      Part Number.................39J0149
      FRU Number..................39J0149
      Serial Number...............YL10A51120BB
      Manufacture ID..............000A
      EC Level....................0
      ROM Level.(alterable).......050D007f
      Product Specific.(Z0).......5709
      Product Specific.(Z1).......2

Description
PREDICTIVE BATTERY PACK FAILURE

      Recommended Actions
      PERFORM PROBLEM DETERMINATION PROCEDURES
      FOLLOW BATTERY REPLACEMENT PROCEDURES

Detail Data
SENSE DATA
00FF FFFF 1900 00F0 015D 9200 0301 0000 050D 007F 0000 00FF 5709 8009 0000 0000

ADDITIONAL HEX DATA
E210 0080 FF00 0000 0230 0001 2D9C F13E 0000 0000 0000 018C 015D 9200 00FF FFFF
FFFF FFFF 1521 02C1 4000 0000 0000 0000 1521 01D0 0000 0028 0000 0001 0000 0001
0001 0101 0000 0000 0101 0101 0100 0000 0001 0101 0101 0000 0000 0101 0101 0100
0000 0001 0101 0101 0000 0000 0101 0101 0100 0000 0001 0101 0101 0000 0000 06BB
4658 2C24 0003 001A 0000 005A 0000 0000 0000 0000 0000 0990 0000 0000 0000 098B
011A D72F 0000 0000 0000 0000 0000 0204 E873 93D0 0000 0452 D3D6 A328 0000 0063
8A0D F52C 0000 0000 0000 0000 0000 07E3 0000 0000 0000 2000 2000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0002 E9B7 3537 3039
3030 3041 3035 3131 3230 4242 A1D0 03B4 3035 3132 3133 3032 3531 3235 0000 BFBF
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 ABAB ABAB 5454 5454 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 9A00 0000 0000 0048 000D 0000 5051 1413 0000 C0F3
0000 0000

Diagnostic Analysis
Diagnostic Log sequence number: 145
Resource tested:       sisraid0
Resource Description: Ultra320 SCSI RAID Adapter Logical bus
Location:             U787F.001.DPM0DL2-P1-C8-T1
SRN:                   2523-8009
Description:          Impending Cache Battery Pack failure.
Possible FRUs:
n/a             FRU: n/a                U787F.001.DPM0DL2-P1-C8-T1
                  Cache Battery Pack

该如何去处理？？？

作者: panhaizhou 时间: 2008-10-14 09:10
TESTING COMPLETE on Tue Oct 14 09:05:05 BEIST 2008                                           801010

No trouble was found.

The resources tested were:

[TOP]
- sysplanar0                         System Planar
- usbhc0                               USB Host Controller (33103500)
  U787F.001.DPM0DL2-P1
- usbhc1                               USB Host Controller (33103500)
  U787F.001.DPM0DL2-P1
- ent1                               2-Port 10/100/1000 Base-TX PCI-X
                                    Adapter (14108902)
  U787F.001.DPM0DL2-P1-T5
- ent2                               2-Port 10/100/1000 Base-TX PCI-X
                                    Adapter (14108902)
  U787F.001.DPM0DL2-P1-T6
- cd0                                  IDE DVD-ROM Drive
  U787F.001.DPM0DL2-P4-D2
- sisioa0                            PCI-X Dual Channel U320 SCSI RAID
                                    Adapter
  U787F.001.DPM0DL2-P1
- ses0                               SCSI Enclosure Services Device
  U787F.001.DPM0DL2-P1-T10-L15-L0
- ses1                               SCSI Enclosure Services Device
[MORE...10]

Use Enter to continue.

F3=Cancel             Esc+0=Exit             Enter

作者: panhaizhou 时间: 2008-10-14 09:12
执行了上述以后，多了一条错误，就是下面的
# errpt
IDENTIFIER TIMESTAMP  T C RESOURCE_NAME  DESCRIPTION
812AD93D 1014090508 T H sisraid0    PREDICTIVE BATTERY PACK FAILURE
812AD93D 1010053408 T H sisraid0    PREDICTIVE BATTERY PACK FAILURE
A6DF45AA 1001164008 I O RMCdaemon    The daemon is started.
1BA7DF4E 1001164008 P S SRC          SOFTWARE PROGRAM ERROR
BA431EB7 1001164008 P S SRC          SOFTWARE PROGRAM ERROR
BA431EB7 1001164008 P S SRC          SOFTWARE PROGRAM ERROR
E85C5C4C 1001164008 P S CFGLFT    SOFTWARE PROGRAM ERROR
2BFA76F6 1001115908 T S SYSPROC       SYSTEM SHUTDOWN BY USER
9DBCFDEE 1001164008 T O errdemon    ERROR LOGGING TURNED ON
192AC071 1001115708 T O errdemon    ERROR LOGGING TURNED OFF
18087FF0 0730135108 P H kbd0          DEVICE ERROR
BFE4C025 0728184708 P H sysplanar0    UNDETERMINED ERROR

作者: crazyblood 时间: 2008-10-14 09:13
报错不是写了raid卡电池报错了吗，换块电池试试

作者: doudalun 时间: 2008-10-14 09:16
Resource Description: Ultra320 SCSI RAID Adapter Logical bus
Location:             U787F.001.DPM0DL2-P1-C8-T1
SRN:                   2523-8009
Description:          Impending Cache Battery Pack failure.
Possible FRUs:
n/a             FRU: n/a                U787F.001.DPM0DL2-P1-C8-T1
                  Cache Battery Pack

scsi raid卡电池有问题吧？
黄灯消不掉可以进asmi里面消

作者: autokyo 时间: 2008-10-14 10:46

原帖由 doudalun 于 2008-10-14 09:16 发表
Resource Description: Ultra320 SCSI RAID Adapter Logical bus
Location:             U787F.001.DPM0DL2-P1-C8-T1
SRN:                   2523-8009
Description:          Impending Cache Batt ...

能不能说说具体的步骤？我也遇到黄灯消不掉，但查了没有上述一些错误。

作者: dfxsoft 时间: 2008-10-14 14:14
阵列卡电池可预见的错误，在彻底坏掉之前应该更换

作者: panhaizhou 时间: 2008-10-14 15:34
结案！

作者: richardpeng 时间: 2008-10-14 21:17
/usr/lpp/diag*/bin/usysfault -s nomal

作者: fck 时间: 2008-10-15 11:40
如何结案的？

作者: chalylau 时间: 2008-10-15 11:44
怎么结案的

作者: zlwww1227 时间: 2008-10-15 12:12
提示: 作者被禁止或删除内容自动屏蔽

作者: redliquid 时间: 2008-10-15 13:17
有一些机器可能要到log repair action里去消黄灯吧

作者: linyang1978 时间: 2008-10-18 12:51
先换掉电池，再消黄灯啊。
消黄灯有几种方法，如下：
在命令行方式下，运行diag命令：

diag

->;Enter

->;Task Selection

->;Identify and Attention Indicators

->;Select "Set System Attention Indicator to NORMAL"

->;F7,Ok

或者：

diag

->;Enter

->;Task Selection(Diagnostics,Advanced Diagnostics,Service Aids,etc)

->;Log Repair Action

->;

+ sys0 -------00-00 --System Object

+ sysplanar0 -00-00 --System Planar

->;F7

如果还是不行的话
运行 /usr/lpp/diagnostics/bin/usysfault，如果显示结果不是normal的
话。
运行/usr/lpp/diagnostics/bin/usysfault -s normal ，故障灯就会熄灭。

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)