alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3e900000.
DoCalllist done
Warning: Setting the expanded_node_host_names parameter to 1 will allow administrators to set node and host names larger than 8 and 64 ch
aracters/bytes, respectively. It is strongly recommended that all related manpages and documentation be understood before setting larger
names. Larger names can cause some applications which use those names to behave incorrectly or fail.
Module mpt is put into ramfs:load time: driver_install, state: loaded
Module ciss is put into ramfs:load time: driver_install, state: loaded
Module lvmp is put into ramfs:load time: driver_install, state: loaded
Module igelan is put into ramfs:load time: driver_install, state: loaded
Module iether is put into ramfs:load time: driver_install, state: loaded
Module gelan is put into ramfs:load time: driver_install, state: loaded
Module td is put into ramfs:load time: driver_install, state: loaded
Module fcd is put into ramfs:load time: driver_install, state: loaded
Module cifs is put into ramfs:load time: driver_install, state: auto
Module cfsm is put into ramfs:load time: driver_install, state: auto
Module cfsmdr is put into ramfs:load time: driver_install, state: auto
Module cdfs is put into ramfs:load time: driver_install, state: auto
Module cfsmdr is put into ramfs:load time: driver_install, state: auto
Module cdfs is put into ramfs:load time: driver_install, state: auto
Module c8xx is put into ramfs:load time: driver_install, state: loaded
Module procsm is put into ramfs:load time: driver_install, state: loaded
Module btlan is put into ramfs:load time: driver_install, state: loaded
Using /stand/ext_ioconfig
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 4868 MB 4868 MB 4868 MB
Kernel : 4867 MB 4867 MB 4867 MB
User : 4637 MB 4111 MB 4127 MB
-------------------------------------------------------------------------
Starting ktracer 0 1
NOTE: nm_devvp_lock not a power of 2 or is outside of allowed range: (16)
NOTE: setting nm_devvp_lock to 32
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
System Console is on the Built-In Serial Interface
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
AF_INET socket/streams output daemon running, pid 38
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 10289152
livedump: Current architecture is not supported.
Stored message buffer up to system crash:
Warning: Setting the expanded_node_host_names parameter to 1 will allow administrators to set node and host names larger than 8 and 64 ch
aracters/bytes, respectively. It is strongly recommended that all related manpages and documentation be understood b
efore setting larger names. Larger names can cause some applications which use those names to behave incorrectly or fail.
Module mpt is put into ramfs:load time: driver_install, state: loaded
Module ciss is put into ramfs:load time: driver_install, state: loaded
Module lvmp is put into ramfs:load time: driver_install, state: loaded
Module igelan is put into ramfs:load time: driver_install, state: loaded
Module iether is put into ramfs:load time: driver_install, state: loaded
Module gelan is put into ramfs:load time: driver_install, state: loaded
Module td is put into ramfs:load time: driver_install, state: loaded
Module fcd is put into ramfs:load time: driver_install, state: loaded
Module cifs is put into ramfs:load time: driver_install, state: auto
Module cfsm is put into ramfs:load time: driver_install, state: auto
Module cfsmdr is put into ramfs:load time: driver_install, state: auto
Module cdfs is put into ramfs:load time: driver_install, state: auto
Module c8xx is put into ramfs:load time: driver_install, state: loaded
Module procsm is put into ramfs:load time: driver_install, state: loaded
Module btlan is put into ramfs:load time: driver_install, state: loaded
Using /stand/ext_ioconfig
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 4868 MB 4868 MB 4868 MB
Kernel : 4867 MB 4867 MB 4867 MB
User : 4637 MB 4111 MB 4127 MB
-------------------------------------------------------------------------
Starting ktracer 0 1
NOTE: nm_devvp_lock not a power of 2 or is outside of allowed range: (16)
NOTE: setting nm_devvp_lock to 32
Installing Socket Protocol families AF_INET and AF_INET6
64000/0xfa00 esvroot
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
btlan_load() Loaded Successfully
0 sba
0/0 lba
0/0/1/0 UsbOhci
0/0/1/1 UsbOhci
0/0/1/2 UsbEhci
0/0/2/0 side_multi
0/0/2/0.0 side
0/0/2/0.1 side
0/1 lba
c8xx BUS: 2 SCSI C1010 Ultra160 Wide LVD assigned CPU: 0
0/1/1/0 c8xx
c8xx BUS: 3 SCSI C1010 Ultra160 Wide LVD assigned CPU: 0
0/1/1/1 c8xx
0/1/2/0 igelan
0/2 lba
0/3 lba
fcd: Claimed HP AB378-60101 4Gb Fibre Channel port at hardware path 0/3/1/0 (FC Port 1 on HBA)
0/3/1/0 fcd
0/4 lba
fcd: Claimed HP AB378-60101 4Gb Fibre Channel port at hardware path 0/4/1/0 (FC Port 1 on HBA)
0/4/1/0 fcd
0/6 lba
0/7 lba
0/7/1/0 asio0
0/7/1/1 asio0
8 memory
16 ipmi
128 processor
0/0/2/0.0.0x0 estp
0/0/2/0.0.0x0.0x0 eslpt
0/0/2/0.0.0 tgt
0/0/2/0.0.0.0 sdisk
0/1/1/0.0x1 estp
0/1/1/0.0x0 estp
0/1/1/0.0x1.0x0 eslpt
0/1/1/0.0x0.0x0 eslpt
0/1/1/0.1 tgt
0/1/1/0.1.0 sdisk
0/1/1/0.0 tgt
0/1/1/0.0.0 sdisk
64000/0xfa00/0x0 esdisk
64000/0xfa00/0x1 esdisk
64000/0xfa00/0x2 esdisk
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
System Console is on the Built-In Serial Interface
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
AF_INET socket/streams output daemon running, pid 38
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 10289152
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0000000000000000 - major is 1, minor is 0x1; start = 2067296, size = 5144576
livedump: Current architecture is not supported.
VFS_MOUNTROOT error information:
0hfs) 22
1nfs) 223
6DevFS) 251
10vxfs) 28
11nfs3) 223
12nfs4) 223
13autofs) 251
15cifs) 223
18dnlc_neg_fs) 251
Message buffer contents after system crash:
linkstamp: Mon Aug 11 20:02:31 UTC 2008
_release_version: @(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf
panic: VFS_MOUNTROOT: RDWR: all VFS_MOUNTROOTs failed: NEED DRIVERS ?????
PC-Offset Stack Trace (read down, top of stack is 1st):
0x008670a0 (panic+0x12
0x008f9bcc (vfs_mountroot+0x434)
0x0047ff18 (im_preinitrc+0x260)
0x008f4320 (DoCalllist+0xf0)
0x0047fa78 (main+0x2
0x008a1920 ($vstart+0x4
0x00141738 (istackatbase+0xfc)
End Of Stack
i 0 pfn 0x0 pages 0x40000
i 1 pfn 0x100000 pages 0x3fe00
i 2 pfn 0x4040000 pages 0xc0000
*** Not enough CPUS for a compressed dump ***
*** A system crash has occurred. (See the above messages for details.)
*** The dump will be a SELECTIVE dump with
compression OFF and concurrency OFF: 573 of 5118 megabytes.
*** To change this dump type, press any key within 10 seconds.
*** Proceeding with selective dump, with compression off and concurrency off.
Primary Dump Header Location :
Device details:
Major number: 31 Minor number:0x21000
Offset: 2067296.
*** The dump may be aborted at any time by pressing ESC.
*** Dumping: 0% complete (1 of 573 MB)
ESC was detected. Press Y within 10 seconds to abort the dump,
or press any other key to continue.
*** Continuing dump.
*** Dumping: 100% complete (573 of 573 MB)
time: 88 seconds, Number of Dump units: 1作者: leelangco 时间: 2009-03-31 17:43
盘坏了？看看控制台的日志吧
hfs) 22