标题: 如何chdev硬盘 [打印本页] 作者: huoren_123 时间: 2009-05-08 12:55 标题: 如何chdev硬盘 有一台7779-BCS外带四个刀片7998-60X,60X都有系统。60X都是一样的配置,各带2块硬盘。重新给四台60X装系统(系统装在了hdisk0上),选的是完全覆盖安装。装完系统后,查看硬盘显示如下:
#lspv
hdisk0 000264aa8bdb094e rootvg active
hdisk1 000264aa33dda78b rootvg active
#chdev -l hdisk1 -a pv=clear
Method error(/usr/lib/methods/chgdisk):
0514-062 Cannot porform the requestde function because the specified device is busy.
#rmdev -dl hdisk1 -R
Method error(/usr/lib/methods/ucfgdevice):
0514-062 Cannot porform the requestde function because the specified device is busy.
请问如何能把那块hdisk1硬盘的系统给chdev掉???????
[ 本帖最后由 huoren_123 于 2009-5-8 12:58 编辑 ]作者: ziggler 时间: 2009-05-08 13:16 标题: 回复 #1 huoren_123 的帖子 0514-062 Cannot perform the requested function because the specified device is busy
Possible Causes
You specified a device that is being used by one or more processes.
Procedures for Recovery
Check to make sure you selected the correct device.
If that is not the problem:
Remove the process that is allocating your device.
Run the ps -ef command to list which process is using the device you specified.
Remove the process by using the kill command.
If that does not resolve the problem:
Reboot your system and reenter your command if your system is still busy.
Use the sync command to update your i-node table.
Run the shutdown -Fr command. Wait for the login prompt.
After you log in, reenter your command.
If your device is still busy: