Chinaunix

标题: 请教一个HP RX1600的问题,谢谢! [打印本页]

作者: jason_bourne_zh    时间: 2009-06-02 17:44
标题: 请教一个HP RX1600的问题,谢谢!
请教大家两个问题,详情如下:
第一个问题:
机器型号:HP RX1600
机器启动后,屏幕界面如下:
EFI Boot Manager ver 1.10 [14.61]  Firmware ver 1.10 [4341]
Stop Boot condition detected. Only EFI shell can be started
Please select a boot option

    EFI Shell [Built-in]                                            
    Internal Bootable DVD                                          
    Boot Option Maintenance Menu                                    
    System Configuration Menu                                       


    Use ^ and v to change option(s). Use Enter to select an option

我选择“ Internal Bootable DVD  ”项,按完回车后,显示如下:
                                                               
    Stop Boot condition detected !!
    Only EFI shell or approved diagnostic can be started


请问各位高手如何解决?非常感谢!

另外附上报错信息如下:

WARNING AND STOP BOOT INFORMATION

  Warning[08]: BMC cannot be accessed
  Warning[09]: One or more BMC ports failed
  Warning[20]: NVM token access failure
  Warning[22]: Failure reading BMC token on upload to NVM
  Error[55]  : Invalid or inaccessible system ID(s)



第二个问题:
如何清除“EFI Shell [Built-in]”这项的密码。
小弟初学HP-UX,不是很清楚,非常感谢大家,希望大家说的详细一点,谢谢!

[ 本帖最后由 jason_bourne_zhao 于 2009-6-2 17:49 编辑 ]

error.JPG (38.24 KB, 下载次数: 35)

error.JPG

作者: easybegin    时间: 2009-06-09 10:22
顶一下
作者: kuku@yuer    时间: 2009-06-10 01:02
放的啥光盘啊~~
作者: axjl_bourne    时间: 2009-06-10 10:06
标题: 回复 #3 kuku@yuer 的帖子
HP-UX 11i的安装盘啊!




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2