Chinaunix

标题: 求助:ds4800创建array时报violates SAFE limitations错误 [打印本页]

作者: templarma 时间: 2009-11-23 21:38
标题: 求助:ds4800创建array时报violates SAFE limitations错误
ds4800在创建array时，不管选择什么raid方式都出现
Return code: Error 437 - The requested operation was rejected because the current configuration of the array violates SAFE limitations/compliance.

所用的软件版本是10.60

错误的详细内容如下
OPERATING ENVIRONMENT DATA

Client system name: xxx-PC
Client OS: Windows Vista

Application version: 10.50.G5.25
Storage subsystem management version: 10.50.G5.25
Storage Subsystem name: nmds4800
Firmware version: 07.50.13.00
Management class: devmgr.v1050api07.Manager

**************************************************

ERROR DATA

Command sent to controller in slot: A
Host name: fe80:0:0:0:2a0:b8ff:fe47:d955
IP address: fe80:0:0:0:2a0:b8ff:fe47:d955

Return code: Error 437 - The requested operation was rejected because the current configuration of the array violates SAFE limitations/compliance.
Operation when error occurred: PROC_createVolumeGroup
Timestamp: 2009-11-23 17:36:55

STACK DATA

devmgr.v1050api07.sam.jal.ManagementOperationFailedException:
at devmgr.v1050api07.sam.jal.SYMbolClient.dispatchOperation(Unknown Source)
at devmgr.v1050api07.sam.jal.StorageArrayFacade.issueCommand(Unknown Source)
at devmgr.v1050api07.sam.jal.StorageArrayFacade.sendCommandCommon(Unknown Source)
at devmgr.v1050api07.sam.jal.StorageArrayFacade.sendCommand(Unknown Source)
at devmgr.v1050api07.sam.jal.StorageArrayFacade.createVolumeGroup(Unknown Source)
at devmgr.v1050api07.sam.volume.CreateVolumeGroupWizard$2.performOp(Unknown Source)
at devmgr.v1050api07.shared.AbstractTaskAdapter.run(Unknown Source)

THREAD DATA

Thread[Reference Handler,10,system]
Thread[Finalizer,8,system]
Thread[Signal Dispatcher,9,system]
Thread[Java2D Disposer,10,system]
Thread[TimerQueue,5,system]
Thread[AWT-Shutdown,5,main]
Thread[AWT-Windows,6,main]
Thread[AWT-EventQueue-0,6,main]
Thread[DestroyJavaVM,5,main]
Thread[ChangeDetector,6,main]
Thread[LogMsgThread,6,main]
Thread[Np_Link_Monitor0,6,main]
Thread[DMVGarbageCollectorThread,6,main]
Thread[AEN-68,6,main]
Thread[Timer-1,6,main]
Thread[Image Animator 3,3,main]

作者: AIX深入敌后 时间: 2009-11-24 09:16
什么盘阵？日立的？你查一下盘阵

作者: templarma 时间: 2009-11-24 09:39
ibm DS4800
硬盘是日立1T 7200rpm的

[ 本帖最后由 templarma 于 2009-11-24 10:54 编辑 ]

作者: yangshichang 时间: 2009-11-24 11:38
高手指点下

作者: templarma 时间: 2009-11-24 12:01
经IBM指点，重刷固件，清除所有配置后问题解决

作者: cfed 时间: 2009-11-24 12:32
升级固件么？

作者: templarma 时间: 2009-11-24 13:04
我的已经是最新的了，但他还让我刷了一遍，然后又把里面的配置都清除了就好了

作者: cfed 时间: 2009-11-24 14:25
不知道你之前试过清配置没，呵呵

作者: junly_huang 时间: 2016-03-24 11:19
请问怎么清除配置？？

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)